Theory of interfacial phase transitions in surfactant systems

The spin-1 Ising model, which is equivalent to the three-component lattice gas model, is used to study wetting transitions in three-component surfactant systems consisting of an oil, water, and a nonionic surfactant. Phase equilibria, interfacial profiles, and interfacial tensions for three-phase equilibrium are determined in mean field approximation, for a wide range of temperature and interaction parameters. Surfactant interaction parameters are found to strongly influence interfacial tensions, reducing them in some cases to ultralow values. Interfacial tensions are used to determine whether the middle phase, rich in surfactant, wets or does not wet the interface between the oil-rich and water-rich phases. By varying temperature and interaction parameters, a wetting transition is located and found to be of the first order. Comparison is made with recent experimental results on wetting transitions in ternary surfactant systems.This paper is dedicated to J. K. Percus in honor of his 65th birthday.     

Microstructure dependent dynamic fracture analyses of trabecular bone based on nascent bone atomistic simulations

Trabecular bone fracture is closely related to the trabecular architecture, microdamage accumulation, and bone tissue properties. Primary constituents of trabecular tissue are hydroxyapatite (HA) mineralized type-I collagen fibers. In this research, dynamic fracture in two dimensional (2-D) micrographs of ovine (sheep) trabecular bone is modeled using the mesoscale cohesive finite element method (CFEM). The bone tissue fracture properties are obtained based on the atomistic strength analyses of a type-I collagen + HA interfacial arrangement using molecular dynamics (MD). Analyses show that the presented framework is capable of analyzing the architecture dependent fracture in 2-D micrographs of trabecular bone.     

The Linear Rational Pseudospectral Method with Preassigned Poles

We present a linear rational pseudospectral (collocation) method with preassigned poles for solving boundary value problems. It consists in attaching poles to the trial polynomial so as to make it a rational interpolant. Its convergence is proved by transforming the problem into an associated boundary value problem. Numerical examples demonstrate that the rational pseudospectral method is often more efficient than the polynomial method.     

ENSTAR detector forη- mesic studies

We have initiated a search for a new type of nuclear matter, theη-mesic nucleus, using beams from the multi-GeV hadron facility, COSY at Juelich, Germany. A large acceptance scintillator detector, ENSTAR has been designed and built at BARC, Mumbai and fully assembled and tested at COSY. A test run for calibration and evaluation has been completed. In this contribution we present the design and technical details of the ENSTAR detector and how it will be used to detect protons and pions (the decay products ofη-mesic bound state). The detector is made of plastic scintillators arranged in three concentric cylindrical layers. The readout of the detectors is by means of optical fibres. The layers are used to generate ΔE –E spectra for particle identification and total energy information of stopped particles. The granularity of the detector allows for position (θ and ?ø determination making the event reconstruction kinematically complete     

Differential pulse polarographic determination of trace amounts of vanadium and molybdenum in various standard alloys and environmental samples after preconcentration of their morpholine-4-carbodithioates on microcrystalline naphthalene or morpholine-4-dithiocarbamate cetyltrimethyl-ammonium bromide-naphthalene adsorbent

A highly selective, sensitive, and fairly rapid and economical differential pulse polarographic (DPP) method has been reported for the determination of trace amounts of vanadium and molybdenum in standard alloys and various environmental samples. The morpholine-4-carbodithioates of these metals were retained (>99% recovery) quantitatively on microcrystalline naphthalene in the pH range 4.5-6.9 for vanadium and 1.5-4.5 for molybdenum. These metals were determined by DPP after desorption with 10 ml of 1 M HCl. Vanadium and molybdenum may also be preconcentrated by passing their aqueous solutions under similar conditions on morpholine-4-dithiocarbamate CTMAB-naphthalene adsorbent packed in a column at a flow rate of 1-5 ml min(-1) and determined similarly. The detection limits are 0.20 ppm for vanadium and 0.04 ppm for molybdenum at minimum instrumental settings (signal to noise ratio=2). The linearity is maintained in the following concentration ranges, vanadium 0.50-10.0 and molybdenum 0.10-9.0 ppm, with a correlation factor of 0.9996 (confidence interval of 95%, slopes 0.0196 and 0.01497 muA mug(-1), intercepts 3.65x10(-3) and -1.92x10(-3) respectively) and relative standard deviation of 1.1% in the microcrystalline method, while in the column method, the linearity is maintained in the concentration ranges, 0.50-6.5 for vanadium and 0.10-5.5 ppm for molybdenum with correlation factor of 0.9994 (with confidence interval of 95%, slopes 0.0194, 0.015 muA mug(-1), intercepts 3.60x10(-3) and -1.90x10(-3) respectively) and relative standard deviation of 1.4%. Various parameters such as the effect of pH, reagent, naphthalene and CTMAB concentrations, volume of aqueous phase and interference of a large number of metal ions on the estimation of vanadium and molybdenum have been studied in detail to optimize the conditions for their voltammetric determination at trace level in various standard alloys and environmental samples.     

Aqueous polymerization of methacrylamide

The aqueous polymerization of methacrylamide (I) initiated by KBrO₃–thioglycolic acid (TGA) has been studied at 30 ± 0.2°C in nitrogen. The rate is given by K[M]^1.19 [thioglycolic acid]¹ [KBrO₃]^0.53 for 10–15% conversion. Activation energy was found to be 53.96 kJ/mole (12.92 kcal/mole) in the investigated range of temperature 30–45°C. The role of addition of a series of aliphatic alcohols and some salts was also determined. The kinetics of polymerization was followed iodometrically.     

Studies on polymerization of vinyl acetate using ylide as an initiator and degradative transfer agent

Polymerization of vinyl acetate initiated by β-picolinium p-chlorophenacylide was carried out at 30, 35, and 40°C, using conventional dilatometric technique. The initiator and the monomer exponent values were 0.80 ± 0.15 and unity, respectively. The polymerization was inhibited in the presence of hydroquinone, but was favored by nonpolar solvent and polymerization temperature. The energy of activation was 90.3 KJ mol^?1. An average value of k/k_t for the present system was found to be 0.37 × 10^?2. The results are explained in terms of a radical mode of polymerization with degradative initiator transfer; the principal mode of termination, however, was bimolecular.