Mathematical model for the analytical signal of an herbicide sensor based on the reaction centre of Rhodobacter sphaeroides

This paper introduces a mathematical model which makes it possible both to determine the concentration of photosynthetic herbicides and to obtain a quantitative parameter in order to compare their activity using a previously described sensing system. The working principle involves the changes in absorption properties at 860 nm of the reaction centre (RC) isolated from the bacteria Rhodobacter sphaeroides when photosynthetic herbicides are present. The method has been used for the determination and activity comparison of five photosynthetic herbicides: diuron, atrazine, terbutryn, terbuthylazine and simazine. Detection limits obtained were 2.2, 0.75, 0.046, 0.25, and 1.4 μM, respectively. The resulting order for the different herbicides according to their action on RC was: terbutryn > terbuthylazine > atrazine > simazine > diuron.     

Regio- and Stereochemical Aspects of the Palladium-Catalyzed Desilylation-Arylation of Substituted Vinylsilanes

The palladium-catalyzed desilylation-arylation of substituted vinylsilanes by p-iodoanisole in the presence of bidentate phosphine ligands is described. Apart from enhancing the rate of the reaction considerably, heteroatom-based functional groups in the vinylsilane moiety have a profound influence on the regiochemistry. A catalytic cycle for the chelation-controlled desilylation-arylation reaction involving five- and six-membered chelate rings is proposed.     

Determination by LC of Polyphenols in Italian Red Wine

A reversed-phase liquid chromatographic method, optimised for the separation of trans-, and cis-resveratrol, catechin, epicatechin, quercetin and rutin, is reported. Separation was achieved using a C18 column and a gradient elution with acetonitrile and 5% formic acid aqueous solution. The analyses required an equilibration period of 10 min and a run time of 25 min for completion. Identification was based on retention characteristics and by relative UV spectra, obtained by photodiode array detector and were compared with commercial standards. Analyses were performed without any sample pre-treatment. Detection was carried out by UV–Vis detector at three different wavelengths. The detection limit ranged from 0.16 μgm L⁻¹ (cis-resveratrol) to 1.5 μgm L⁻¹ (+)-catechin. Investigation was extended to quantitative determination of phenol compounds in Italian red wine and to investigate the stability of the six antioxidants.     

Photophysical and Primary Self-Referencing Thermometric Properties of Europium Hydrogen-Bonded Triazine Frameworks

Lanthanide hydrogen-bonded organic frameworks (LnHOFs) are recently emerging as a novel versatile class of multicomponent luminescent materials with promising potential applications in optics and photonics. Trivalent europium (Eu³⁺) incorporated polymeric hydrogen-bonded triazine frameworks (PHTF:Eu) have been successfully obtained via a facile and low-cost thermal pyrolysis route. The PHTF:Eu material shows a porous frame structure principally composed of isocyanuric acid and ammelide as a minor constituent. Intense red luminescence with high colour-purity from Eu³⁺ is obtained by exciting over a broad absorption band peaked at 300 nm either at room or low temperature. The triazine-based host works as excellent optical antenna towards Eu³⁺, yielding ~42% sensitization efficiency (η_sens) and an intrinsic quantum yield of Eu³⁺ emission (Φ_Eu) as high as ~46%. Temperature-dependent emission studies show that PHTF:Eu displays relatively high optical stability at elevated temperatures in comparison to traditional inorganic phosphors. The retrieved activation energy of 89 meV indicates that thermal quenching mechanisms are attributed to the intrinsic energy level structure of the metal-triazine assembly, possibly via a thermally activated back transfer to ligand triplet or CT states. Finally, by using an innovative approach based on excitation spectra, we demonstrate that PHTF:Eu can work as a universal primary self-referencing thermometer based on a single-emitting center with excellent relative sensitivity in the cryogenic temperature range.     

Analytical performance of glucometers in a tertiary care hospital

Point-of-care (POC) testing of glucose (glucometers) represents a convenient alternative to monitor glycemia since the measurement procedure is performed without delay after sampling of the capillary blood, thereby avoiding the metabolism by the blood cells of glucose present in plasma. Likely because of sample instability, there is no proficiency test provider in Brazil for this type of POC sample. In this context, this study aimed to evaluate the analytical performance of glucometers used in a tertiary care hospital. The glucometers used were the Accu-Chek Performa^® model from Roche Diagnostics, which use the principle of amperometry. The reference method was the reaction with modified hexokinase/glucose-6-phosphate in a Dimension^® device. The stability evaluation of the control samples showed that it can be performed up to 90 min after the collection of whole blood samples. In the two rounds performed, only one result of the 17 glucometers evaluated was out of the threshold of two standard deviation. Thus, this method for control of glucometers met the expectations and enabled comparing the glucometers in a hospital. Given the current quality guidelines, daily internal quality control of glucometers is recommended, besides at least two annual comparisons between the results of the glucometers and the reference method and one EQA every 3 months.     

Synthesis and applications of copillar[5]arene dithiols

Abstract

A novel copillar[4+1]arene incorporating alkylthiol substituents was synthesised in three steps and structurally characterised as the first example of a pillar[n]arene to incorporate two terminal thiols on the same aromatic ring. The macrocycle was attached to gold electrodes through a standard dipping technique. Cyclic voltammetry demonstrated selectivity for Li⁺ over other alkali metal cations. The copillar[4+1]arene was also used as a capping agent in the preparation of 3 nm gold nanoparticles.     

Ionic liquids as recycling solvents for the synthesis of magnetic nanoparticles

This work describes an easy synthesis (one pot) of MFe(2)O(4) (M = Co, Fe, Mn, and Ni) magnetic nanoparticles MNPs by the thermal decomposition of Fe(Acac)(3)/M(Acac)(2) by using BMI·NTf(2) (1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) or BMI·PF(6) (1-n-butyl-3-methylimidazolium hexafluorophosphate) ionic liquids (ILs) as recycling solvents and oleylamine as the reducing and surface modifier agent. The effects of reaction temperature and reaction time on the features of the magnetic nanomaterials (size and magnetic properties) were investigated. The growth of the MNPs is easily controlled in the IL by adjusting the reaction temperature and time, as inferred from Fe(3)O(4) MNPs obtained at 150 °C, 200 °C and 250 °C with mean diameters of 8, 10 and 15 nm, respectively. However, the thermal decomposition of Fe(Acac)(3) performed in a conventional high boiling point solvent (diphenyl ether, bp 259 °C), under a similar Fe to oleylamine molar ratio used in the IL synthesis, does not follow the same growth mechanism and rendered only smaller NPs of 5 nm mean diameter. All MNPs are covered by at least one monolayer of oleylamine making them readily dispersible in non-polar solvents. Besides the influence on the nanoparticles growth, which is important for the preparation of highly crystalline MNPs, the IL was easily recycled and has been used in at least 20 successive syntheses.     

Determination of enrofloxacin and its metabolite ciprofloxacin in goat milk by high-performance liquid chromatography with diode-array detection. Optimization and validation

A high-performance liquid chromatography-diode array detection method (HPLC-DAD) combined with liquid chromatography-mass spectrometry was developed for the determination of enrofloxacin and its metabolite ciprofloxacin in goat milk. The HPLC-DAD method validation was compliant with the "DG SANCO 1805/2000" European regulation. The residues were extracted from milk with phosphate buffer, purified on a C18 Speedisk cartridge SPE (Baker) and then analysed using HPLC-DAD set at 277 nm. The decision limit (CCa) calculated by spiking samples at 100 microg/kg with both analytes, taking into account the maximum residue limit (MRL) of 100 microg/kg established by the European Union for the sum of enrofloxacin and its metabolite ciprofloxacin in milk, was 105.3 microg/kg for enrofloxacin and 105.5 microg/kg for ciprofloxacin. The detection capability (CCbeta) was 110.7 and 110.9 microg/kg for enrofloxacin and ciprofloxacin, respectively. The mean recoveries of the method, calculated by spiking samples at 50, 100 and 150 microg/kg were 84% for enrofloxacin and 88% for ciprofloxacin. The limit of quantification was 20 microg/kg for both analytes. The HPLC-DAD validated method was successfully applied for the first time in goats milk, and proved to be suitable for the sensitive and accurate quantification and confirmation analysis of enrofloxacin and ciprofloxacin for regulatory purposes.     

Radon Measure-Valued Solutions for a Class of Quasilinear Parabolic Equations

Initial value problems for quasilinear parabolic equations having Radon measures as initial data have been widely investigated, looking for solutions which for positive times take values in some function space. In contrast, it is the purpose of this paper to define and investigate solutions that for positive times take values in the space of the Radon measures of the initial data. We call such solutions measure-valued, in contrast to function-valued solutionspreviously considered in the literature. We first show that there is a natural notion of measure-valued solution of problem (P) below, in spite of its nonlinear character. A major consequence of our definition is that, if the space dimension is greater than one, the concentrated part of the solution with respect to the Newtonian capacity is constant in time. Subsequently, we prove that there exists exactly one solution of the problem, such that the diffuse part with respect to the Newtonian capacity of the singular part of the solution (with respect to the Lebesgue measure) is concentrated for almost every positive time on the set where “the regular part (with respect to the Lebesgue measure) is large”. Moreover, using a family of entropy inequalities we demonstrate that the singular part of the solution is nonincreasing in time. Finally, the regularity problem is addressed, as we give conditions (depending on the space dimension, the initial data and the rate of convergence at infinity of the nonlinearity ψ) to ensure that the measure-valued solution of problem (P) is, in fact, function-valued.