Age-related changes in innervation in hypertrophic pyloric stenosis

BACKGROUND/PURPOSE: Recent reports have identified abnormal innervation of the circular muscle layer involving the fine intramuscular nerve fibers in hypertrophic pyloric stenous (HPS). HPS presenting after 3 months of age is rare. The aim of this study was to determine the distribution pattern of nerve fibers in the smooth muscle layers in HPS and correlate this with age at presentation. METHODS: Full-thickness pyloric muscle biopsy specimens were obtained from eight patients with HPS (five age 3 to 5 weeks, two age 3 months, and one age 7 months) and five controls with normal pylorus (age 5 days to 3 years). All specimens were stained with monoclonal antibody to the neural cell adhesion molecule (NCAM) using immunohistochemistry. RESULTS: There were many NCAM-positive nerve fibers in the circular and longitudinal muscle layers in the controls. No NCAM positive nerve fibers were seen in the circular or longitudinal muscle layers in the five cases of HPS in which the patients were less than 5 weeks old. In the two cases in which the patients were 3 months old, occasional NCAM-positive nerve fibers were seen in the circular layer, and moderate numbers of NCAM positive fibers were seen in the longitudinal muscle layers. Moderate numbers of NCAM-positive nerve fibers in the circular muscle layer and many NCAM positive nerve fibers in the longitudinal muscle layers were identified in the 7-month-old HPS patient. CONCLUSIONS: The data suggest that the pyloric muscle lacks innervation in the young HPS infant. Whereas, at 3 months of age the hypertrophied pyloric muscle is partially innervated, and at 7 months of age the pyloric muscle has practically normal innervation.     

Powder Deposition in Three Parallel-Oriented Dies of Different Shapes

Uniformity of bulk density distribution during the die filling process is required to minimize quality problems, such as distortion and cracking, for powder compacts. Understanding the die filling process is necessary in ensuring a uniform powder deposition. The second-generation pressure deposition tester (PDT-II) was used to investigate the deposition process and final pressure distribution of powder filling in toroidal, cylindrical, and E-shaped dies. All tests were conducted using a spray-dried free-flowing granular powder. The results indicated that for toroidal dies: (1) the area around 0° orientation (the leeward end) had the highest pressure values (1186.7 to 2498.0 Pa), with the average pressure values of the remaining area 353.7-648.0 Pa; (2) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; (3) the highest feed shoe speed (500 mm/s) led to the most nonuniform pressure distribution among the three speeds; (4) higher feed shoe speed did not always result in higher final pressure values; and (5) the right die tended to have higher final pressure values (215.0 to 2498.0 Pa) than the center die (95.4 to 2052.5 Pa). For E-shaped dies: (1) the final pressure values of the middle leg (308.9 to 760.7 Pa) were higher than those of the left and the right legs (148.9 to 530.3 Pa); (2) the area along the backside had the highest final pressure value (1054.6 to 1303.8 Pa); (3) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; and (4) neither the center die nor the right die always had higher pressure values than the other one at all locations. Comparison between cylindrical and toroidal dies indicated that: (1) neither of the two die shapes (cylinder and toroid) led to consistently higher or lower final pressure values at all locations and (2) for all three feed shoe speeds, the toroidal die had higher average final pressure values in the 0° orientation.     

Detection of West Nile virus by the polymerase chain reaction and analysis of nucleotide sequence variation

A polymerase chain reaction (PCR) assay was developed to rapidly detect and identify West Nile (WN) virus. The RNA from seven isolates of WN virus from six countries and four other flaviviruses (Kunjin, Japanese encephalitis, St. Louis encephalitis, and yellow fever viruses) was reverse-transcribed (RT) and amplified by PCR. The nucleotide sequences of the amplified products were determined by a rapid, automated DNA sequencing method. The WN virus RT/PCR assay detected the target gene segment of sequencing method. The WN virus RT/PCR assay detected the target gene segment of isolates from both the African-Middle Eastern group and the Indian group with a sensitivity of approximately 0.05 pg of viral RNA. Kunjin virus was the only other flavivirus tested that produced a band of the appropriate size. Five of seven WN virus isolates showed 92-98% homology in the nucleotide sequence of their PCR products. The sequence of one isolate was virtually identical to the published sequence of the Nigerian isolate (99.5% homology). No correlation was established between the degree of nucleotide homology, geographic location, time of isolation, or source of the isolates.     

Serum enzyme abnormalities in protein energy malnutrition

A semi-quantitative right coronary artery score (RCA score) was derived from the ratio of the number of the major left ventricular branches of the right coronary artery to the total of the right coronary and left circumflex arteries, to stratify the extent of perfusion in patients with right coronary artery dominance. Thirty-seven patients with one-vessel coronary disease involving a dominant right coronary artery proximal to the left ventricular branches were selected for study. Thallium scintigraphy was performed after right intracoronary injection in 11 patients, and 26 patients underwent conventional stress thallium scintigraphy (24 exercise thallium and two dipyridamole thallium scintigraphy). Thallium scores of perfusion region size after right intracoronary thallium injection and perfusion defect size in stress thallium studies were quantitated from planar thallium images. Both the RCA score and the regional thallium scores spanned over a wide range. The RCA score (range 0.23-0.85) correlated best with the posterior (70 degrees left anterior oblique view) plus lateral segment (40 degrees left anterior oblique view) thallium score (r = 0.88 and 0.53 for intracoronary and stress thallium studies respectively). It also correlated with the summed thallium scores in the posterior, lateral, apical and inferior segments (r = 0.73 and 0.54 respectively) but not with thallium scores in the apex or inferior segment alone. The proposed RCA score quantitates the variable posterolateral perfusion territory of the right coronary artery, and could stratify the area of myocardium at risk from coronary stenosis in the majority of patients with right coronary dominance.     

An analysis and optimisation of the geometrical inaccuracy due to wire lag phenomenon in WEDM

An extensive study of the wire lag phenomenon in Wire-cut Electrical Discharge Machining (WEDM) has been carried out and the trend of variation of the geometrical inaccuracy caused due to wire lag with various machine control parameters has been established in this paper. In an extremely complicated machining process like Wire-cut EDM, which is governed by as many as ten control factors, it is very difficult to select the best parametric combination for a particular situation arising out of customer requirements. In the present research study, all the machine control parameters are considered simultaneously for the machining operation which comprised a rough cut followed by a trim cut. The objective of the study has been to carry out an experimental investigation based on the Taguchi method involving thirteen control factors with three levels for an orthogonal array L₂₇ (3¹³). The main influencing factors are determined for given machining criteria, such as: average cutting speed, surface finish characteristic and geometrical inaccuracy caused due to wire lag. Also, the optimum parametric settings for different machining situations have been found out and reported in the paper.     

Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy

The present research is the first type of study in which the application of powder mixed electrical discharge machining (PMEDM) for the machining of β-phase titanium (β-Ti) alloy has been proposed. β-Ti alloys are new range of titanium alloys, which has a wide-spread application in dental, orthopedics, shape memory, and stents. The aim of the present study is to fabricate submicro- and nanoscale topography by PMEDM process to enhance the biocompatibility without affecting machining efficiency. The effect of Si powder concentration along with pulse current and duration on the surface and machining characteristics has been investigated. A significant decrease in surface crack density on the machined surface with 4 g/l Si powder concentration was observed. When β-Ti alloy was modified at 15 A pulse current, longer pulse interval with 8 g/l concentration of Si powder particles, the interconnected surface porosities with pore size 200–500 nm was observed. Moreover, at Si powder concentrations of 2 g/l and 4 g/l, the recast layer thickness is 8 µm and 2–3 µm, respectively. Elemental mapping analysis confirmed that PMEDM also generated carbides and oxides enriched surface, a favorable surface chemistry to enhance the biocompatibility of β-Ti alloy. Furthermore, PMEDM also enhances the machining performance by improving material removal rate and reducing tool wear rate.     

Self-nanoemulsifying drug delivery system of docosahexanoic acid: development,in vitro,in vivo characterization

Context: Docosahexanoic acid (DHA) is an essential omega-3 fatty acid for normal brain development and its use has increased considerably in recent years.

Objective: The aim of this study is to develop and evaluate self-nanoemulsifying drug delivery systems (SNEDDS) of DHA for improved palatability, dispersibility and bioavailability.

Methods: The SNEDDS were prepared and evaluated for miscibility, employing different combinations of olive oil and soyabean oil as oil phase, Span 80, Span 20, soya phosphatidylcholine, Labrafil M 1944 CS as surfactants while Tween 80, PEG 400, Cremophor RH40 and propylene glycol as cosurfactants. Thermodynamically stable SNEDDS were characterized for dispersibility, self-emulsification time, droplet size, zeta potential along with sensory analysis. The optimized formulation was subjected to ex vivo and in vivo evaluation such as intestinal permeability, memory performance test, brain concentration and histopathology studies.

Results: The optimized SNEDDS formulation showed emulsification time of 27?±?4.7?s with droplet size of 17.6?±?3.5?nm and zeta potential of??37.6?±?0.5?mV. Intestinal absorption study depicted 18.3%, 21.5%, 41.5%, 98.7% absorption of DHA with SNEDDS-based formulation in comparison to 8.2%, 15.1%, 28.8%, 46.1% absorption of DHA with oil-based marketed formulation after 0.5, 1, 2 and 4?h. DHA concentration in brain homogenate was found to be increased to 2.6-fold in comparison to DHA-marketed formulation. This could be ascribed to enhanced dispersibility and bioavailability of DHA from nanosized formulation.

Conclusion: The developed formulation led to enhanced dispersibility and bioavailability of DHA due to the formation of nanodroplets.     

An integrated source transcoding and congestion control paradigmfor video streaming in the Internet

In this work we present an end-to-end optimized video streaming system comprising of synergistic interaction between a source packetization strategy and an efficient and responsive, TCP-friendly congestion control protocol [Linear Increase Multiplicative Decrease with History (LIMD/H)]. The proposed source packetization scheme transforms a scalable/layered video bitstream so as to provide graceful resilience to network packet drops. The congestion control mechanism provides low variation in transmission rate in steady state and at the same time is reactive and provably TCP-friendly. While the two constituent algorithms identified above are novel in their own right, a key aspect of this work is the integration of these algorithms in a simple yet effective framework. This “application-transport” layer interaction approach is used to maximize the expected delivered video quality at the receiver. The integrated framework allows our system to gracefully tolerate and quickly react to sudden changes in the available connection capacity due to the onset of congestion, as verified in our simulations     

Distributed video coding in wireless sensor networks

This paper addresses the important aspect of compressing and transmitting video signals generated by wireless broadband networks while heeding the architectural demands imposed by these networks in terms of energy constraints as well as the channel uncertainty related to the wireless communication medium. Driven by the need to develop light, robust, energy-efficient, and low delay video delivery schemes, a distributed video coding based framework dubbed PRISM is introduced. PRISM addresses the wireless video sensor network requirements far more effectively than current state-of-the-art standards like MPEG. This paper focuses on the case of a single video camera and use it as a platform to describe the theoretical principles and practical aspects underlying distributed video coding.