Space-domain method of moments solution for a strip on a dielectricslab

This paper presents a space-domain method of moments (MoM) solution to the problem of a strip dipole on a dielectric slab. The solution involves the use of a special junction basis function which models the nearly singular polarization currents in the vicinity of the strip/dielectric junction     

Trans FA and solid fat contents of margarines marketed in Turkey

Trans FA (TFA), solid fat contents (SFC), and slip melting points of 12 different tub and stick margarines marketed in Turkey were examined in this study. No trans isomers were found in four margarines, which suggests they were formulated from interesterified or blended fats and oils. The products with no TFA generally had more short-chain saturated FA, which suggests coconut oil-based oil components. TFA content of the other 10 products varied from 7.7 to 37.8%. Compared to the products formulated in North America, Turkish margarines contain more TFA and have higher SFC.     

Dynamic stability of a shaft system connected through a Hooke's joint

Dynamic stability of the torsional vibrations of a shaft system consisting of two torsionally elastic shafts interconnected through a Hooke's joint is investigated by means of a two degree-of-freedom model. The linearized equations of motion are shown to consist of a set of Mathieu-Hill equations and stability of their solutions is analyzed by means of a monodromy matrix method. Results are presented in the form of stability charts constructed on various parameter planes visualizing the effect of various selected pairs of system parameters on the stability.     

A color-based face tracking algorithm for enhancing interaction with mobile devices

A color-based face tracking algorithm is proposed to be used as a human-computer interaction tool on mobile devices. The solution provides a natural means of interaction enabling a motion parallax effect in applications. The algorithm considers the characteristics of mobile use-constrained computational resources and varying environmental conditions. The solution is based on color comparisons and works on images gathered from the front camera of a device. In addition to color comparisons, the coherency of the facial pixels is considered in the algorithm. Several applications are also demonstrated in this work, which use the face position to determine the viewpoint in a virtual scene, or for browsing large images. The accuracy of the system is tested under different environmental conditions such as lighting and background, and the performance of the system is measured in different types of mobile devices. According to these measurements the system allows for accurate (7% RMS error) face tracking in real time (20–100 fps).     

A combined fuzzy linear regression and fuzzy multiple objective programming approach for setting target levels in quality function deployment

Quality function deployment (QFD) is a systematic process for translating customer needs into engineering characteristics, and then communicating them throughout the enterprise in a way to ensure that details are quantified and controlled. The inherent fuzziness of relationships in QFD modeling justifies the use of fuzzy regression for estimating the relationships between both customer needs and engineering characteristics, and among engineering characteristics. Albeit QFD aims to maximize customer satisfaction, requirements related to enterprise satisfaction such as cost budget, extendibility, and technical difficulty also need to be considered. This paper presents a fuzzy multiple objective decision framework that includes not only fulfillment of engineering characteristics to maximize customer satisfaction, but also maximization of extendibility and minimization of technical difficulty of engineering characteristics as objectives subject to a financial budget constraint to determine target levels of engineering characteristics in product design. A real-world quality improvement problem is presented to illustrate the application of the decision approach.     

Processing characteristics and structure development in solid-state extrusion of bacterial copolyesters: Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The bacterial copolyesters poly(3-hydroxybutyrate-co-3-hydroxyvalerate) have been successfully commercialized by ICI and are currently being distributed worldwide. Because of their bacterial origin, they are completely biodegradable. This has opened up numerous opportunities to develop new environmentally friendly products. The solid-state extrusion of a series of biodegradable copolyesters (P(3HB-3HV)) was performed in our laboratory with the aim of gaining fundamental understanding about their processability below their melting temperatures. The extrudability windows were found to span the temperature range from 135 to 150°C, depending on the composition of the samples under our experimental setup. The solid-state extrudates were found to exhibit an extra melting endotherm about 15–20°C above their normal melting temperature. This high temperature melting peak increasingly became dominant at lower extrusion temperatures. Wide angle X-ray diffraction studies did not indicate any phase change that might be responsible for this increase in the melting point. Contrary to the expectations, the solid-state extruded samples did not show significant chain orientation along the extrusion direction. This might be a result of fracture of the mass in the barrel into smaller pieces and their randomization during the course of their passage through the die. When the extrusion temperature was raised closer to the melting temperature, the quality of the extrudates was improved, and this was reflected in improvement of their mechanical properties. © 1996 John Wiley & Sons, Inc.     

Neurodevelopmental Disorders Associated with PSD-95 and Its Interaction Partners

The postsynaptic density (PSD) is a massive protein complex, critical for synaptic strength and plasticity in excitatory neurons. Here, the scaffolding protein PSD-95 plays a crucial role as it organizes key PSD components essential for synaptic signaling, development, and survival. Recently, variants in DLG4 encoding PSD-95 were found to cause a neurodevelopmental disorder with a variety of clinical features including intellectual disability, developmental delay, and epilepsy. Genetic variants in several of the interaction partners of PSD-95 are associated with similar phenotypes, suggesting that deficient PSD-95 may affect the interaction partners, explaining the overlapping symptoms. Here, we review the transmembrane interaction partners of PSD-95 and their association with neurodevelopmental disorders. We assess how the structural changes induced by DLG4 missense variants may disrupt or alter such protein–protein interactions, and we argue that the pathological effect of DLG4 variants is, at least partly, exerted indirectly through interaction partners of PSD-95. This review presents a direction for functional studies to elucidate the pathogenic mechanism of deficient PSD-95, providing clues for therapeutic strategies.     

Aromatic liquid crystalline copolyesters with low Tm and high Tg: Synthesis,characterization, and properties

In this study, a series of aromatic copolyesters P‐BPAx with lower melting temperature and higher glass transition temperature derived from hydroxybenzoic acid (HBA), 6‐hydroxy‐2‐naphthoic acid (HNA), bisphenol A (BPA) and terephthalic acid (TA) were synthesized via melt polymerization. The copolyesters were characterized by FTIR, solid state ¹³C NMR, DSC, TGA, polarized optical microscopy, X‐ray diffraction, and rheometry measurements. With addition of BPA, the resulting copolyester's melting temperature decreased from 260 to 221°C and its glass transition temperature increased from 70 to 135°C, compared with the parent copolyester P‐HBA70 (HBA/HNA copolymer). With exception of copolyester P‐BPA5.0 (225–280°C), the copolyesters could maintain liquid crystalline behavior in a broad temperature range from 230°C to higher than 410°C. The ability to form nematic liquid crystalline phase disappeared when BPA concentration became higher than 15 mol %. X‐ray diffraction analysis showed crystallinity decreased as the BPA content increased. A slightly distorted O" and a substantially distorted O′ orthorhombic phase was observed for P‐BPA2.5. Upon annealing at 220°C, the O" phase disappeared and the O′ phase became stronger gradually. Rheology study data showed the ability to process the copolyesters improved in those compositions containing <2.5 mol % BPA. Continuing to increase concentrations of BPA, they became intractable. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40487.