An architecture framework for an adaptive extensible processor

To improve the performance of embedded processors, an effective technique is collapsing critical computation subgraphs as application-specific instruction set extensions and executing them on custom functional units. The problem with this approach is the immense cost and the long times required to design a new processor for each application. As a solution to this issue, we propose an adaptive extensible processor in which custom instructions (CIs) are generated and added after chip-fabrication. To support this feature, custom functional units are replaced by a reconfigurable matrix of functional units (FUs). A systematic quantitative approach is used for determining the appropriate structure of the reconfigurable functional unit (RFU). We also introduce an integrated framework for generating mappable CIs on the RFU. Using this architecture, performance is improved by up to 1.33, with an average improvement of 1.16, compared to a 4-issue in-order RISC processor. By partitioning the configuration memory, detecting similar/subset CIs and merging small CIs, the size of the configuration memory is reduced by 40%.     

The experimental and numerical impacts of geometrical parameters of conical shock tube on the function,maximum pressure and generative impulses to expose equivalent mass and behavioral equation

One of the methods to investigate the phenomenon of explosion underwater and its impact on the structures is to use the conical shock tube. These tubes produce a lot of pressure using a tiny explosive charge. In this essay, the geometry of the established/manufactured explosive shock tube is demonstrated first and the results of the experiments operating the tube is presented. Then, the explosion of a given amount of explosive charge in the conical shock tube is studied by benefiting the LS‐DYNA code. The numerical simulation is done by Lagrange‐Oiler selected multi‐materials solutions. To ensure the authenticity of the selected method in the software, the results of the stimulated model is compared with the experimental outcomes accordingly, after accrediting the accuracy of the results, the stimulating and scrutinizing the effects of geometrical parameters on the function of explosive shock tubes is proceeded. In this research, the effect of the cone head angel on the produced pressure inside the shock tube is analyzed first. Then, the function of shock tubes with different lengths is checked. Moreover, after changing the scale of the explosive charge and studying the outcome, stating the reasons for changes in each parameter and examining the effect of the relation between the explosive proportion and the water volume inside the shock tube, an equation for the equivalent mass for all sock tubes with different angels is exhibited and the existing theoretical relation is revised. Finally, by examining the pressure and impulses changes in different intervals, an equation is presented to anticipate the pressure and impulses in different shock tubes.     

Co-Production of Fungal Biomass Derived Constituents and Ethanol from Citrus Wastes Free Sugars without Auxiliary Nutrients in Airlift Bioreactor

The potential of two zygomycetes fungi, Mucor indicus and Rhizopus oryzae, in assimilating citrus waste free sugars (CWFS) and producing fungal chitosan, oil, and protein as well as ethanol was investigated. Extraction of free sugars from citrus waste can reduce its environmental impact by decreasing the possibility of wild microorganisms growth and formation of bad odors, a typical problem facing the citrus industries. A total sugar concentration of 25.1 g/L was obtained by water extraction of citrus waste at room temperature, used for fungal cultivation in shake flasks and airlift bioreactor with no additional nutrients. In shake flasks cultivations, the fungi were only able to assimilate glucose, while fructose remained almost intact. In contrast, the cultivation of M. indicus and R. oryzae in the four-liter airlift bioreactor resulted in the consumption of almost all sugars and production of 250 and 280 g fungal biomass per kg of consumed sugar, respectively. These biomasses correspondingly contained 40% and 51% protein and 9.8% and 4.4% oil. Furthermore, the fungal cell walls, obtained after removing the alkali soluble fraction of the fungi, contained 0.61 and 0.69 g chitin and chitosan per g of cell wall for M. indicus and R. oryzae, respectively. Moreover, the maximum ethanol yield of 36% and 18% was obtained from M. indicus and R. oryzae, respectively. Furthermore, that M. indicus grew as clump mycelia in the airlift bioreactor, while R. oryzae formed spherical suspended pellets, is a promising feature towards industrialization of the process.     

Advances in electrospinning: The production and application of nanofibres and nanofibrous structures

The use of electrospun nanofibres in applications such as medical products, fuel cells, photocatalysis, filtration, sensors and actuators is reviewed. Yarn production is classified into two types, namely hollow and core-shell structures; the methods used for producing the two structures for different polymers are discussed. Explanations are given for the various arrangements for producing nanofibre yarns and bundles in non-twisted or twisted forms to suit their end use. Natural and synthetic polymer products for biomedical uses and their applications in the form of polymer nanofibres are reviewed and polymeric optical fibres for use in photonic devices and optical circuits are evaluated. The production and development of nanofibrous filtration devices is explored with specific reference to water treatment and the control of air pollution. Particular attention is then given to the evaluation of different electrospinning methods for PVDF (polyvinylidene fluoride), a piezoelectric polymer widely used in sensor applications in terms of their ability to harvest more energy after agitation of the sensor and the effects of different additives on the piezoelectric properties of PVDF. Priorities for further research are then outlined.     

Active nano-CuPt3 electrocatalyst supported on graphene for enhancing reactions at the cathode in all-vanadium redox flow batteries

Graphene-supported monometallic (Pt) and bimetallic (CuPt₃) cubic nanocatalysts have been investigated as new positive electrode materials for improving the VO₂⁺/VO²⁺ redox process occurring in the vanadium redox flow batteries (VRB). High-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) have been employed to characterize the electrodes. The presence of the CuPt₃ nanocubes on graphene conferred higher electrocatalytic activity due to the much higher electroactive area compared to that obtained with the Pt nanoparticles. The electrochemical surface area of the nano-(CuPt₃)-decorated graphene electrode was 105% higher compared to non-decorated graphene, being then a promising alternative for improving the VRB.     

Facile synthesis of novel optically active poly(amide‐imide)s containing N,N′‐(pyromellitoyl)‐bis‐l‐phenylalanine diacid chloride and 5,5‐disubstituted hydantoin derivatives under microwave irradiation

Pyromellitic dianhydride (1,2,4,5‐benzenetetracarboxylic acid 1,2,4,5‐dianhydide) (1) was reacted with L‐phenylalanine (2) in a mixture of acetic acid and pyridine (3 : 2) at room temperature, then was refluxed at 90–100°C and N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid (3) was obtained in quantitative yield. The imide‐acid (3) was converted to N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid chloride (4) by reaction with thionyl chloride. Rapid and highly efficient synthesis of poly(amide‐imide)s (6a–f) was achieved under microwave irradiation by using a domestic microwave oven from the polycondensation reactions of N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid chloride (4) with six different derivatives of 5,5‐disubstituted hydantoin compounds (5a–f) in the presence of a small amount of a polar organic medium that acts as a primary microwave absorber. Suitable organic media was o‐cresol. The polycondensation proceeded rapidly, compared with the conventional melt polycondensation and solution polycondensation, and was almost completed within 10 min, giving a series of poly(amide‐imide)s with inherent viscosities about 0.28–0.44 dL/g. The resulting poly(amide‐imide)s were obtained in high yield and are optically active and thermally stable. All of the above compounds were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity (η_inh), solubility test and specific rotation. Thermal properties of the poly(amide‐imide)s were investigated using thermal gravimetric analysis (TGA). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 516–524, 2004     

PSW statistical LSB image steganalysis

Multimedia Tools and Applications - Steganography is the art and science of producing covert communications by concealing secret messages in apparently innocent media, while steganalysis is the art...     

Paired-wire carrying current actuators and piezoelectric beam sensors for microelectromechanical systems

Microsystem Technologies - An alternative actuator for MEMS/NEMS device is proposed and analyzed. The actuator is based on the paired-wires (PW) carrying current concept, which makes the actuator...     

Study of Adsorption/Desorption Effect of 2-Mercaptobenzothiazole as Sweet Corrosion Inhibitor on API-5L X60 Steel

Protection of Metals and Physical Chemistry of Surfaces - In this study, the inhibitive performance of 2-mercaptobenzothiazole (2MBT) and 2-aminobenzothiazole (2ABT) were investigated on API-5L X60...