Adsorption of urea,creatinine, and uric acid from three solution types using spherical activated carbon and its recyclability

In this paper, we propose that the urinary toxins from the wastewater be adsorbed on an adsorbent such as spherical activated carbon and the latter be regenerated by subjecting it to high temperatures to recycle activated carbon and also to recycle the water used in dialysis. We studied the adsorption of artificial waste dialysate, which is a mixed solution of urea, creatinine, and uric acid, and the separate solutions for each of these and found that their extents of adsorption onto the spherical activated carbon material were nearly identical. The amount of adsorption was approximately 1.4 mg·g^-1 for urea, 18 mg·g^-1 for creatinine, and 20 mg·g^-1 for uric acid. The urea, creatinine, and uric acid adsorbed onto the spherical activated carbon decomposed on heat treatment at 500℃, and the adsorption capacity of the spherical activated carbon was regenerated. Our study successfully demonstrated that the spherical activated carbon can be recycled in the waste dialysate treatment process.     

A carboxyalkanethiol monolayer modified electrode for blocking of ascorbic acid oxidation and its application to a biosensor

Upon the application of amperometric biosensor to the biological fluid, ascorbic acid interferes the amperometric determination of analytes, because the oxidative potential of ascorbic acid is lower than that of electro active substances such as H₂O₂ produced by the enzymatic reaction. In this study we propose a method to block ascorbic acid based on the electrostatic interaction with self-assembled monolayer (SAM) and its application of the surface modified electrode to biosensor. In order to form SAM on the gold electrode with carboxyl group, 7-carboxy-heptanethiol (7-CHT) was used. The 7-CHT modified electrode did not show anodic response to ascorbic acid, but oxidized phenanthroline cobalt complex [Co(phen)₃²⁺], which can be used as a mediator of biosensor. Thus, the 7CHT-modified electrode was applied to biosensor mediated with Co(phen)₃²⁺. Fructose dehydrogenase (FDH) was immobilized to the 7-CHT modified electrode. Fructose was determined selectively with the FDH/7-CHT modified electrode at the range of 0.2-2 mM.     

The relationship between the molecular weight and the critical miscibility composition of a solvent-nonsolvent-terpolymer system

A theoretical equation for the dependence of the apparent molecular weight measured by light scattering on the solvent used has been derived with regard to the composition heterogeneity. Terpolymers corresponding to a partial azeotrope were synthesized from styrene, acrylonitrile, and methyl methacrylate with mole fractions of 0.55, 0.16, and 0.29, respectively. The molecular weight measured by light scattering was found to be independent of the solvent used. Therefore the terpolymer was concluded to be apparently homogeneous in composition. The relationship between the molecular weight M of the terpolymer and the volume fraction of the nonsolvent γ in the solvent mixture at the precipitation point in a butanone-methanol-terpolymer system was experimentally proved to follow the equation where γ₀ and b′ are constants. Between the molecular weight and the limiting viscosity number [η] of the terpolymer the following relationships are valid at 35°C: and      

Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

Analysis of electro‐optical properties of polymer‐stabilized OCB and the application to TFT‐LCDs

Abstract— A 9‐in. full‐color polymer‐stabilized OCB TFT‐LCD with stable bend alignment in the absence of an electric field was developed. The condition of the polymer stabilization, the characteristics of UV‐curable monomers, and their influence on the configurations of the polymer network in the cell were studied. Possible models of the configuration were proposed and their relationship to the electro‐optical properties was analyzed using a novel simulation method considering the distribution of anchoring effects from both alignment surfaces and the polymer network. It was suggested that a good performance such as high contrast ratio and fast response could be expected in the polymer network originating from newly developed monomers composed of multifunctional LC acrylates due to a relatively weak‐anchoring effect and presumably its localization near the alignment surfaces. By using the newly developed monomers under the optimized polymer‐stabilizing process, a high contrast ratio of 250:1 and fast response nearly equal to that of a conventional OCB cell were achieved.     

A Review on InGaSb Growth under Microgravity and Terrestrial Conditions Towards Future Crystal Growth Project Using Chinese Recovery Satellite SJ-10

The paper reviewed the previous microgravity experiment using Chinese recovery satellite, the in-situ measurement of composition profile in the solution by X-ray penetration method and homogeneous growth of InGaSb by temperature freezing method under terrestrial condition for making clear the effect of gravity on the growth of InGaSb ternary alloy semiconductor crystals. The previous experimental results showed that the shape of solid/liquid interfaces and composition profile in the solution were significantly affected by gravity. Based on the previous microgravity experimental results, experimental conditions were investigated to grow homogeneous In _xGa _1?xSb with higher indium composition at Chinese recovery satellite SJ-10 in near future.     

高质量密度储氢材料-氨基化合物的合成

采用真空蒸发法制备了氨基化锂LiNH2(+2·LiH)薄膜,即首先将Li真空镀膜到金属基板上,然后经氮化、氢化处理合成LiNH2薄膜.此外,真空蒸发法也用于Mg部分置换Li后薄膜的制备.实验结果证明,与传统的粉末状试样相比,薄膜状试样能够在更低的温度下释放出氢气.研究表明采用包括真空蒸发法等非传统方法合成金属络合物储氢材料对进一步提高其储放氢特性具有良好的效果.     

Fluorescent in situ hybridization analysis of open lactic acid fermentation of kitchen refuse using rRNA-targeted oligonucleotide probes

Reproducible amounts of lactic acid accumulate in minced kitchen refuse under open conditions with intermittent pH neutralization [Sakai et al., Food Sci. Technol. Res., 6, 140 (2000)]. Here, we showed that such pH-controlled open fermentation of kitchen refuse reproducibly resulted a selective proliferation of a major lactic acid bacterial (LAB) species. In one experiment, the predominant microorganisms isolated during the early phase (6 h) were Gammaproteobacteria. In contrast, those that predominated during the late phase (48 h) were always Lactobacillus plantarum in three independent experiments. To further quantify the microbial community within open lactic acid fermentation, we performed fluorescent in situ hybridization (FISH) analysis targeting 16S (23S) rRNA. We designed two new group-specific DNA probes: LAC722(L) was active for most LAB including the genera Lactobacillus, Pediococcus, Leuconostoc and Weisella, whereas Lplan477 was specific for L. plantarum and its related species. We then optimized sample preparation using lysozyme and hybridization conditions including temperature, as well as the formamide concentration and the salt concentration in the washing buffer. We succeeded in quantification of microorganisms in semi-solid, complex biological materials such as minced kitchen refuse by taking color microphotographs in modified RGB balance on pre-coated slides. FISH analysis of the fermentation of kitchen refuse indicated that control of the pH swing leads to domination by the LAB population in minced kitchen refuse under open conditions. We also confirmed that L. plantarum, which generates lactic acid in high quantities but with low optical activity, became the dominant microorganism in kitchen refuse during the late phase of open fermentation.     

Electromyography of Eating Apples: Influences of Cooking, Cutting, and Peeling

ABSTRACT: The mastication of 7 differently prepared apple samples (raw pieces peeled and unpeeled, sliced, grated, cooked pieces with and without peel, and half-cooked pieces, 10 g each) was evaluated using electromyography (EMG). Eleven subjects participated in the EMG recording of both sides of the masseter and temporal muscles while eating samples normally. Only the grated sample reduced the number of chewing strokes and muscle activity before swallowing. In contrast, the thin apple slices produced significantly shorter contraction duration and cycle time only during the 1st 5 chewing strokes. The EMG duration and cycle in subsequent chews, as well as the other parameters, did not significantly differ between slices and pieces. Cooked apples exhibited significantly lower EMG amplitude and muscle activity per chew than their raw counterparts; however, there was no evidence of reduced total muscle activity required for swallowing. Raw and cooked apples with peel yielded significantly greater EMG amplitude and longer duration than those without peel. These findings suggest that appropriate preparation is necessary for people with various mastication abilities: grated for very low ability, cooked for those with weak chewing force, and unpeeled for mastication training.     

A novel hybrid adsorption heat pump water heater

A hybrid adsorption heat pump water heater has been studied for domestic use. It is a water heater with dual heat sources, and it combines the performances of adsorption heat pumps and conventional gas boilers. Moreover, functional adsorbent material‐zeolite (FAM‐Z02, Mitsubishi Chemicals) and water are a new adsorption pair for adsorption heat pumps. This article describes the operation, design, and performance analysis of one such water‐heating device. The experimental results showed that the hybrid water heater in the whole year has a stable COP even at low ambient temperature. The hybrid water heater can thus achieve high energy efficiency.