Analysis of course errors on CVOR antennas (including effects ofmutual coupling between elements)

A VHF omnidirectional radio range (VOR) is a navigation aid radio beacon facility, which provides aircraft with azimuth information relative to the VOR station in question as the origin. In Japan, two types of VOR-the conventional type (referred to as a CVOR) and the Doppler type (referred to as a DVOR)-are currently in use. An element known as the Alford loop antenna (ALA), which changes the loading reactance, is used for the VOR because the horizontally polarized wave and nondirectivity in the horizontal plane are preferred. A VOR antenna consists of a carrier antenna and a sideband antenna-an aircraft receives separate signals from these two antennas and compares them to obtain azimuth information. The mutual coupling between the elements forming the carrier and the sideband antenna affects the directivity of the single elements, resulting in errors in azimuth information. With the mutual coupling between the antenna elements being taken into consideration, a quantitative calculation was made by using the moment method-the results of the calculation made it clear that a loading reactance value of -320 Ω is better to make not mutually coupled elements nondirectional while a loading reactance value of -600 Ω is optimum to minimize the azimuth error of a CVOR     

Feedback control of decoupled bending and torsional vibrations of flexible beams

In this article, we consider a flexible beam with a rigid body, of which the bending vibration and the torsional vibration are decoupled. Therefore we need two control motors to suppress the vibrations. Each set of dynamic equations is treated in the form of an appropriate Hilbert space. A stabilizing feedback control law of each rotation motor will be established on the basis of modal analysis. A set of experiments has been carried out, and the results demonstrate the effectiveness of the dynamic model and the proposed control law. © 1994 John Wiley & Sons, Inc.     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

Sub-50-nm physical gate length CMOS technology and beyond usingsteep halo

Sub-50-nm CMOS devices are investigated using steep halo and shallow source/drain extensions. By using a high-ramp-rate spike annealing (HRR-SA) process and high-dose halo, 45-nm CMOS devices are fabricated with drive currents of 650 and 300 μA/μm for an off current of less than 10 nA/μm at 1.2 V with T_ox^inv =2.5 nm. For an off current less than 300 nA/μm, 33-nm pMOSFETs have a high drive current of 400 uA/μm. Short-channel effect and reverse short-channel effect are suppressed simultaneously by using the HRR-SA process to activate a source/drain extension (SDE) after forming a deep source/drain (S/D). This process sequence is defined as a reverse-order S/D (R-S/D) formation. By using this formation, 24-nm nMOSFETs are achieved with a high drive current of 800 μA/μm for an off current of less than 300 μA/μm at 1.2 V. This high drive current might be a result of a steep halo structure reducing the spreading resistance of source/drain extensions     

An algorithm for the three-dimensional packing problem with asymptotic performance analysis

The three-dimensional packing problem can be stated as follows. Given a list of boxes, each with a given length, width, and height, the problem is to pack these boxes into a rectangular box of fixed-size bottom and unbounded height, so that the height of this packing is minimized. The boxes have to be packed orthogonally and oriented in all three dimensions. We present an approximation algorithm for this problem and show that its asymptotic performance bound is between 2.5 and 2.67. This result answers a question raised by Li and Cheng [5] about the existence of an algorithm for this problem with an asymptotic performance bound less than 2.89. This research was partially supported by FAPESP (proc. 93/0603-1) and by CNPq/ProTeM-CC, project ProComb (proc. 680065/94-6).     

Characterization of cytochrome P450 (CYP3A12) induction by rifampicin in dog liver

We investigated the mechanisms of renal vascular wall thickening in a rat model of N-nitro L-arginine methyl ester (L-NAME)-induced hypertension. To separate the effects of L-NAME-induced hypertension from other effects of nitric oxide (NO) inhibition, we created two models of L-NAME-induced hypertension: both had the same blood pressure level but NO inhibition was moderate in one group (group M) and severe in the other (group S). Urinary excretion of nitrates and nitrites was lower in group S than in group M. Wall thickening and lipid deposition in renal vessels were significantly greater in group S than in groups M. Simple and multiple regression analyses indicated that renal vascular wall thickening was more strongly correlated with lipid deposition than with blood pressure. The number of vessels positive for staining with Sudan black B was negatively correlated with urinary NO excretion. Expression of fibronectin and transforming growth factor-beta was greater in the Sudan black B-positive than in the Sudan black B-negative vessels, suggesting that extracellular matrix production was increased in vessels with lipid deposition. Lipid deposition and increased production of extracellular matrix may contribute to renal vascular wall thickening in L-NAME-induced hypertension. Some mechanisms independent of hypertension play important roles in vascular wall thickening induced by NO inhibition.     

Study on super-long-life cores loaded with minor actinide fuel

Super-long-life fast breeder reactor cores (SLLC) loaded with minor actinide (MA) fuel were designed aiming at continuous operation without refueling during plant lifetime and efficient reduction of MA nuclides (Np, Am and Cm). The feasibility was studied from nuclear and thermal characteristics. As a result, 1000 MWe and 300 MWe SLLCs with small reactivity change and power swing during plant lifetime were found to be feasible. MAs can be confined and transmuted in the reactor during plant life. A 1000 MWe SLLC can transmute MAs of 10 ton which come from 13 light water reactors (1000 MWe).     

Prevention of heterocyclic amine formation by tea and tea polyphenols

Heterocyclic amines (HCAs), formed during the cooking of meats and fish, are thought to be the genotoxic carcinogens associated with important types of human cancer in meat-eating populations, such as cancer of the breast, colon or pancreas. We studied the effect of black or green tea, and of the tea polyphenols theaflavine gallate (TFG, black tea) and epigallocatechin gallate (EGCG, green tea) on the formation of typical HCAs, 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx), and 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP), using the model in vitro systems of J?gerstad. Green tea and black tea and solutions of TFG and EGCG lower the formation of PhIP by 62-85% during 1 h heating at 160 degrees C of 1 mmol creatinine, 1 mmol phenylalanine and 0.5 mmol glucose in 3.3 ml diethylene glycol-water (10:1), where the inhibitors replaced 0.3 ml of the water. The production of MeIQx and related HCAs, in the same system but with 1 mmol glycine instead of phenylalanine was likewise reduced, determined by amounts of mutagens formed. In the latter systems, the teas were not, or less effective, but the polyphenols were inhibitory. Thus, the tea products represent another approach to lower the formation of HCAs.     

A novel spin-finishing method for antistatic modification of polyester fiber. Surface reaction onto amine-containing copoly(amide-ethers) blended with polyester fiber

Copoly(amide-ethers) containing two types of tertiary amine units were made as antistatic modifiers for poly(ethylene terephthalate) (PET) fibers. The filaments of the copolymers were melt-spun and reacted with three alkylating agents in order to quaternize the tertiary amine into a sulfo-betaine, a carbobetaine, and an ammonium ion. The apparent electric resistivity of the filaments was greatly reduced by this reaction, being in the range of 10⁶ to 10⁸ Ω/cm. However, because these quaternized copolymers incurred decomposition during blend spinning with PET, a blend PET fiber containing one type of copoly(amide-ether) was melt-spun and subjected to quaternization of the amino groups as well as to surface crosslinking with various alkylating and epoxy agents. The quaternized blend fibers obtained showed improved antistatic properties compared with the original blend fiber. Particularly, the fibers crosslinked with epoxy compounds were found to have the best antistatic properties that had ever been attained with this type of modification. The antistatic properties were retained even after dyeing, because both hydrophilic and ionic groups had been effectively immobilized on the surface. Since this quaternization and crosslinking could be conducted on-line with spinning and drawing within a short reaction time, this modification technique is called “spin-finishing method”, which should be superior to the conventional methods in terms of cost performance and productivity.