Maximum power density for an endoreversible carnot heat engine

An analysis using maximum power-density criteria has been carried out for an endoreversible Carnot heat engine. The results have been compared with known results on maximum power analysis. The design parameters at maximum power density lead to smaller and more efficient endoreversible Carnot heat engines than those working at maximum power output.     

Degradation of 4-chloro-2-methylphenol in aqueous solution by electro-Fenton and photoelectro-Fenton processes

Degradation of 4-chloro-2-methylphenol (PCOC), a refractory toxic chemical emitted to the environment from the industrial production of phenoxy herbicides was studied in aqueous solution. Electro-Fenton and photoelectro-Fenton processes were used as the degradation methods. H₂O₂, produced by the reduction of oxygen at carbon cathode reacted with dissolved metal ions to form hydroxyl radicals, which in turn reacted with PCOC sequentially to degrade the aromatic ring. The effects of using different [Fe²⁺]/[PCOC]₀ and the effect of replacing Fe²⁺ by Mn²⁺ ion have been examined. It was found that degradation rate was increased with increasing [Fe²⁺]/[PCOC]₀ ratio from 2 to 4. However, the total charge utilized during the treatment was also increased. The efficiency of PCOC degradation was observed to be higher when Mn²⁺ was used as the catalyst. The mineralization of aqueous solutions of PCOC, withdrawn from the reactor at certain time interval, has been followed by total organic carbon (TOC) decay and dechlorination. A fast and complete degradation of the aromatic ring was achieved in photoelectro-Fenton system. 41.7% TOC decay and complete dechlorination were observed by consuming only 141.4 C electrical charge during a 300 min photoelectron-Fenton treatment. In the case of electro-Fenton system, 280.7 C electrical charge was consumed during 450 min of electrolysis to attain a similar degradation of PCOC. 14.9% TOC removal and 89.3% dechlorination have been obtained in this system under the applied conditions.     

Fair referee assignments for professional football leagues

Assignment of referees to football games is an important problem faced in professional football leagues. Despite its importance, the problem has received limited academic attention. This paper presents a model and analysis of the problem for fair referee assignments, and develops a constructive heuristic and a local search procedure for its solution. Results from an extensive computational study show that the methods are effective in solving the problem in a second of computation time and yielding an excellent solution quality.     

The Effects of Different Heat Treatment Regimes on the Wear Properties of Fe-Based Composite Materials

Powder Metallurgy and Metal Ceramics - In this study, different heat treatment regimes, such as sintering, sintering with low-pressure cementation, and only low-pressure cementation were applied to...     

Processing and Properties of Textured Potassium Sodium Niobate [K,Na]NbO3 Ceramic Ribbons by Alginate Gelation Method

Random and <001> textured potassium sodium niobate – [K,Na]NbO₃ (KNN) ceramics with 1 mole% CuO sintering aid were fabricated in ribbon form through a combination of novel alginate gelation process and templated grain growth methods using platelike sodium niobate ‐ NaNbO₃ (NN) template particles. The platelike NN template particles were prepared by a two‐step molten salt synthesis method. Ribbons were drawn from alginate‐based slurries without or with 10 wt% NN template particles using 50 mm long slit nozzle with a rectangular orifice of 10 mm × 1 mm. Development of crystallographic texture as a result of varying sintering time and temperature was evaluated through the calculation of the degree of orientation as measured by the Lotgering factor (?₍₀₀₁₎) and an ?₍₀₀₁₎ of 0.81 was achieved. The electrical properties of textured ribbons were evaluated with polarization and strain versus electric field measurements.     

Trans-differentiation of human adipose-derived mesenchymal stem cells into cardiomyocyte-like cells on decellularized bovine myocardial extracellular matrix-based films

In this study, we aimed at fabricating decellularized bovine myocardial extracellular matrix-based films (dMEbF) for cardiac tissue engineering (CTE). The decellularization process was carried out utilizing four consecutive stages including hypotonic treatment, detergent treatment, enzymatic digestion and decontamination, respectively. In order to fabricate the dMEbF, dBM were digested with pepsin and gelation process was conducted. dMEbF were then crosslinked with N-hydroxysuccinimide/1-Ethyl-3-(3-dimethylaminopropyl)-carbodiimide (NHS/EDC) to increase their durability. Nuclear contents of native BM and decellularized BM (dBM) tissues were determined with DNA content analysis and agarose-gel electrophoresis. Cell viability on dMEbF for 3rd, 7th, and 14th days was assessed by MTT assay. Cell attachment on dMEbF was also studied by scanning electron microscopy. Trans-differentiation capacity of human adipose-derived mesenchymal stem cells (hAMSCs) into cardiomyocyte-like cells on dMEbF were also evaluated by histochemical and immunohistochemical analyses. DNA contents for native and dBM were, respectively, found as 886.11?±?164.85 and 47.66?±?0.09?ng/mg dry weight, indicating a successful decellularization process. The results of glycosaminoglycan and hydroxyproline assay, and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), performed in order to characterize the extracellular matrix (ECM) composition of native and dBM tissue, showed that the BM matrix was not damaged during the proposed method. Lastly, regarding the histological study, dMEbF not only mimics native ECM, but also induces the stem cells into cardiomyocyte-like cells phenotype which brings it the potential of use in CTE.