Verification of a model for estimating the void fraction in a three-component randomly packed bed

The void fraction in a three-component randomly packed bed was calculated from the authors' model, and the calculated values were compared with published experimental data for spherical and irregularly shaped particles and with results from computer simulations. Results from the model were in good agreement with simulated and published experimental data.     

Theoretical model for flash generation

Reduction of flash generated in a gas vent is of great concern for manufacturers of electronic parts. The present study proposes a theoretical model for flash generation through consideration of flow characteristics in a gas vent. The model predicts the factors controlling flash, i.e., material parameters such as zero‐shear viscosity, crystallization temperature, thermal conductivity, and heat capacity, and process parameters such as injection and mold wall temperatures, packing pressure, and the clearance of a gas vent. On the other hand, we measure the amount of flash generated in the molding of poly(phenylene sulfide) (PPS) composites containing glass fiber and spherical fillers (CaCO₃ or Al₂O₃). Flash reduces with decreasing size of spherical fillers. These experimental data are successfully interpreted using the flash model. Polym. Eng. Sci., 45:198–206, 2005. © 2005 Society of Plastics Engineers     

The short-term effect of a smoking prevention program for the upper graders of elementary schools--the results of intervention study for two years with quasi-experimental design

The purpose of this study was to evaluate the short-term effect of a smoking prevention program for Japanese elementary school-children in the fifth and sixth grades. The program was developed with concepts found in the Know Your Body Program and the conclusions of a National Cancer Institute-convened Expert Advisory Panel, and focused on teaching about the short-term effects of smoking and on resistance to social pressures to smoke. The study was conducted with a quasi-experimental design. An intervention group (52 boys and 54 girls) received three sessions for both the fifth grade in 1992 and the sixth grade in 1993. Moreover, the intervention group received a pre-test before the first session and a post-test after the third session in each grade. A comparison group (102 boys and 91 girls) received the same tests at the same time as the intervention group, but did not receive any program on smoking prevention. The short-term effect of the program were evaluated using the results of the pre-test in the fifth grade and of the post-test in the sixth grade in both groups. The results were as follows: 1) Remarkable short-term effects of the intervention were seen in respect to awareness of the importance of not smoking in girls, and also in the knowledge of the short-term effects of smoking in both sexes. 2) The intervention was not effective with respect to intention to smoke at the age of 20 and self-efficacy of refusing to smoke in both sexes. 3) The short-term effects were not clear in the smoking behavior in both sexes because the rates of ever smokers and of monthly smokers were almost the same for two years between the intervention group and the comparison group. 4) The smoking behaviors of children, their parents and their best friends had little influence on the results of the post-test in the sixth grade.     

Crystal structures of Escherichia coli and Salmonella typhimurium 3-isopropylmalate dehydrogenase and comparison with their thermophilic counterpart from Thermus thermophilus

The basis of protein stability has been investigated by the structural comparison of themophilic enzymes with their mesophilic counterparts. A number of characteristics have been found that can contribute to the stabilization of thermophilic proteins, but no one is uniquely capable of imparting thermostability. The crystal structure of 3-isopropylmalate dehydrogenase (IPMDH) from the mesophiles Escherichia coli and Salmonella typhimurium have been determined by the method of molecular replacement using the known structure of the homologous Thermus thermophilus enzyme. The structure of the E. coli enzyme was refined at a resolution of 2.1 A to an R-factor of 17.3%, that of the S. typhimurium enzyme at 1.7 A resolution to an R-factor of 19.8%. The three structures were compared to elucidate the basis of the higher thermostability of the T. thermophilus enzyme. A mutant that created a cavity in the hydrophobic core of the thermophilic enzyme was designed to investigate the importance of packing density for thermostability. The structure of this mutant was analyzed. The main stabilizing features in the thermophilic enzyme are an increased number of salt bridges, additional hydrogen bonds, a proportionately larger and more hydrophobic subunit interface, shortened N and C termini and a larger number of proline residues. The mutation in the hydrophobic core of T. thermophilus IPMDH resulted in a cavity of 32 A3, but no significant effect on the activity and thermostability of the mutant was observed.     

Continuous emulsion polymerization of vinyl acetate. II Operation in a single Couette–Taylor vortex flow reactor using sodium lauryl sulfate as emulsifier

Continuous emulsion polymerizations of vinyl acetate were conducted at 50°C in a single continuous Couette–Taylor vortex flow reactor (CCTVFR) using sodium lauryl sulfate as emulsifier and potassium persulfate as initiator. The polymerization can be carried out very smoothly and stably, but the steady‐state monomer conversion attained in a CCTVFR is not as high as that in a plug flow reactor (PFR), but only slightly higher than that in a continuous stirred tank reactor (CSTR), even if the Taylor number is adjusted to an optimum value. Also, the effects of operating variables, such as the emulsifier, initiator, and monomer concentrations in the feed and the mean residence time on the kinetic behaviors were almost the same as those observed in a CSTR. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2755–2762, 2002     

Effect of cation structure on the electrochemical and thermal properties of ion conductive polymers obtained from polymerizable ionic liquids

Several onium cations having vinyl group formed ionic liquids after coupling with bis(trifluoromethanesulfonyl)imide. These monomers were polymerized, and the relation between onium cation structure and properties of thus polymerized ionic liquids was investigated. The polymerized ionic liquid having ethylimiadzolium cation unit showed the highest ionic conductivity of around 10⁻⁴ S cm⁻¹ at 30 °C among the obtained polymers reflecting the lowest glass transition temperature of −59 °C. These polymers were thermally stable and their decomposition temperatures were about 350 °C. The ionic conductivity of the polymerized ionic liquids decreased by both the addition of lithium bis(trifluoromethanesulfonyl)imide and the polymerization in the presence of cross-linker. However, the polymerized ionic liquid having 1-methylpiperidinium cation structure showed good lithium ion transference number of 0.43 at room temperature.     

Polymerization of 2-dibutylamino-1,3,5-triazine-4,6-dithiol on wire during friction process

2-Dibutylamino-1,3,5-triazine-4,6-dithiol (DB) and a mixture of DB and triallylisocyanurate (TAIC) were used as a lubricant during steel wire drawing due to a dry process. DB gave a polymer film with 180 nm in thickness to wire surfaces during the wire drawing. The polymer film had a disulfide structure on the backbone and contained a small amount of DB monomer and olygomer. Molecular weight and polymer weight increased with the drawing rate. The mixture of DB and TAIC gave mainly a three-dimensional polymer film with 225 nm in thickness to wire surfaces during drawing. The polymer film insoluble in THF had mono and disulfide structures and contained a small amount of linear polymer, DB, and TAIC. Such tribological polymerizations are estimated as follows: DB produces dithiyl radicals on a nascent surface formed during drawing and in the presence of oxygen and heat. The dithiyl radicals were polymerized by coupling with each other to give disulfide bonds or added to allyl groups in TAIC to give monosulfide bonds. It is concluded that this technique should be possible to use for unifying metal processing and surface treatment. © 1995 John Wiley & Sons, Inc.     

Separation of Polyvinyl Chloride from Plastic Mixture by Froth Flotation after Surface Modification with Ozone

Selective modification by ozonation for the surface of polyvinyl chloride (PVC) was evaluated to separate PVC from the other plastics, polyethylene terephthalate (PET), polycarbonate (PC) and polymethyl methacrylate (PMMA), with almost the same density as PVC by the froth flotation process. Ozonation could selectively decrease the contact angles of flexible PVC from 87.5 degrees to 68.4 degrees and rigid PVC from 90.3 degrees to 66.9 degrees, whereas little decreases in the contact angle were observed for other plastics. This would be due to the replacement of the chloride group on the surface of PVC, into hydrophilic functional groups; carbonyl, carboxyl and ester group. The PVC was successfully separated from the other plastics by the froth flotation process after the selective surface modification by ozonation.     

Synthesis of Ba2NaNb5O15 Powders and Thin Films Using Metal Alkoxides

Transparent and highly oriented Ba₂NaNb₅O₁₅ (BNN) thin films have been prepared by using metal alkoxides. A homogeneous precursor solution was prepared by the controlled reaction of NaOC₂H₅, Nb(OC₂H₅)₅, and barium metal. The BNN precursor included a molecular-level mixture of NaNb(OC₂H₅)₆ and Ba[Nb(OC₂H₅)₆]₂ in ethanol. The alkoxy-derived powder crystallized to a low-temperature phase, and then transformed to orthorhombic BNN (tungsten bronze) at 600°C. BNN precursor films on substrates crystallized to orthorhombic BNN at 800°C via the low-temperature phase. Highly (002) oriented BNN films of tungsten bronze structure were successfully prepared on MgO (100) substrates at 700°C by using BNN underlayer.