Processing of an East Mediterranean phosphate ore sample by an integrated attrition scrubbing/classification scheme (part one)

ABSTRACT

In this study, an Egyptian siliceous/calcareous sedimentary phosphorite was subjected to beneficiation by unsophisticated economic means. The mineralogical and chemical examination showed that the ore sample is a typical example for the East Mediterranean phosphorites with 21.80% P₂O₅, 10.93% acid insoluble and 16.61% loss on ignition. The primary crushed sample was classified into three size fractions without any milling and they were separately subjected to an integrated attrition scrubbing study. Screening and classification on the 2.30 mm and 0.071 mm sieves were sequentially introduced with the attrition process. The effect of solid%, attrition speed and time were studied and optimized for each size fraction. Results showed that three products were produced and could be categorized according to their P₂O₅ content into the coarse tailing (+2.30 mm), the attrition concentrate (?2.30 + 0.071 mm) and the phosphate fines (?0.071 mm). The P₂O₅ contents of these products reached 12.24%, 28.72% and 18.77%, with P₂O₅ distribution reached 6.74%, 51.75% and 41.51%, respectively. A global P₂O₅ of 28.72% was obtained with a recovery of about 52%. A tentative flow-sheet for the whole process was postulated.     

An interactive whiteboard student survey: Development,validity and reliability

The interactive whiteboard (IWB) has become a popular technology for instructors over the last decade. Though research asserts that the IWBs facilitate learning in different ways, there is a lack of studies examining actual IWB use in classroom settings based on learners’ perspectives by means of valid instruments. The purpose of this study is to develop a valid and reliable interactive whiteboard student survey in order to evaluate the IWB use based on perceptions of students who have been taught with IWBs. In establishing the theoretical base of the survey, the Technology Acceptance Model (TAM) and constructivist learning theories were considered. In addition, with respect to IWB use in classrooms, a number of studies emanated from countries such as the UK, the USA, and Australia were examined, and similar research questionnaires and findings and also reflections of students about IWBs were utilized to create an item pool. A 39-item survey was conducted among middle school students (N = 263) from the city of Istanbul in Turkey. Collected data was exposed to exploratory factor analysis and resulted in a 26-item, three-factor survey, whose factors were named as the perceived efficiency of IWB, perceived learning contribution and motivation, and the perceived negative effects of IWB. The results of the analyses illustrated that this new IWB student scale, which explains 50% of the total variance with a good level of Cronbach’s Alpha coefficient (0.93) is a valid and reliable instrument designed specifically for measuring the use of IWBs in real classroom settings. Besides, theoretical foundations of interactive whiteboard use, the development process of the instrument, and results of validity and reliability analyses were discussed in detail.     

Creating a reference data set for the summarization of discussion forum threads

In this paper we address extractive summarization of long threads in online discussion fora. We present an elaborate user evaluation study to determine human preferences in forum summarization and to create a reference data set. We showed long threads to ten different raters and asked them to create a summary by selecting the posts that they considered to be the most important for the thread. We study the agreement between human raters on the summarization task, and we show how multiple reference summaries can be combined to develop a successful model for automatic summarization. We found that although the inter-rater agreement for the summarization task was slight to fair, the automatic summarizer obtained reasonable results in terms of precision, recall, and ROUGE. Moreover, when human raters were asked to choose between the summary created by another human and the summary created by our model in a blind side-by-side comparison, they judged the model’s summary equal to or better than the human summary in over half of the cases. This shows that even for a summarization task with low inter-rater agreement, a model can be trained that generates sensible summaries. In addition, we investigated the potential for personalized summarization. However, the results for the three raters involved in this experiment were inconclusive. We release the reference summaries as a publicly available dataset.     

Some results on disturbance attenuation for Hamiltonian systems via direct discrete‐time design

The disturbance attenuation and robust disturbance attenuation problems for Hamiltonian systems in the discrete‐time setting are considered and some new results are presented. The new results are derived utilizing the recently presented dissipativity equality obtained by adding the dissipation rate function to the classical dissipativity inequality. A selection of the dissipation rate function yields new results. These results include a condition on the dissipation structure of the system to achieve the desired disturbance attenuation level and gives direct construction of optimal control laws for any desired disturbance attenuation level. The results remove the need to solve Hamilton–Jacobi–Isaacs inequalities. Copyright © 2014 John Wiley & Sons, Ltd.     

Tungsten(VI) oxide supported rhodium nanoparticles: Highly active catalysts in hydrogen generation from ammonia borane

Herein, we report the use of tungsten(VI) oxide (WO₃) as support for Rh⁰ nanoparticles. The resulting Rh⁰/WO₃ nanoparticles are highly active and stable catalysts in H₂ generation from the hydrolysis of ammonia borane (AB). We present the results of our investigation on the particle size distribution, catalytic activity and stability of Rh⁰/WO₃ catalysts with 0.5%, 1.0%, 2.0% wt. Rh loadings in the hydrolysis reaction. The results reveal that Rh⁰/WO₃ (0.5% wt. Rh) is very promising catalyst providing a turnover frequency of 749 min^?1 in releasing 3.0 equivalent H₂ per mole of AB from the hydrolysis at 25.0 °C. The high catalytic activity of Rh⁰/WO₃ catalyst is attributed to the reducible nature of support. The report covers the results of kinetics study as well as comparative investigation of activity, recyclability, and reusability of colloidal(0) nanoparticles and Rh⁰/WO₃ (0.5 % wt. Rh) catalyst in the hydrolysis reaction.     

Graphene oxide-containing isocyanate-based polyimide foams: Enhanced thermal stability and flame retardancy

Isocyanate-based graphene oxide-containing polyimide foams were synthesized by a semi-prepolymer method. In this method, while the first solution containing pre-polymer was derived from pyromellitic dianhydride and excess polymethylene polyphenylene isocyanate (PM200), the second solution contains dianhydride derivatives, water, catalysts, surfactants, and graphene oxide. PIFs were prepared with 0%, 0.25%, 0.50%, 0.75%, and 1% graphene oxide by weight, respectively. PIFs exhibited a minimum side reaction and urea generation was not seen for all PIFs instead of imide bonding. The addition of graphene oxide (GO) leads to a more close-packed structure. Therefore, crosslinking density and thermal stability of graphene oxide-containing polyimide foams increased. Upon the addition of 1% GO, almost seven times higher compression strength was obtained compared to neat PIFs. Also, LOI values supported the theory that thermally stable and flame retardant PIFs can be synthesized via the isocyanate-based process with GO.     

Bilaterally Microstructured Thin Polydimethylsiloxane Film Production

Thin PDMS films with complex microstructures are used in the manufacturing of dielectric electro active polymer (DEAP) actuators, sensors and generators, to protect the metal electrode from large strains and to assure controlled actuation. The current manufacturing process at Danfoss Polypower A/S produces films with a one-sided microstructured surface only. It would be advantageous to produce a film with both surfaces microstructured, as this increases the film’s performance efficiency. The new technique introduced herein produces bilaterally microstructured film by combining an embossing method with the existing manufacturing process. In employing the new technique, films with microstructures on both surfaces are successfully made with two different liquid silicone rubber (LSR) formulations: 1) pure XLR630 and 2) XLR630 with titanium dioxide (TiO₂). The LSR films (～70 µm) are cast on a carrier web substrate using a coating blade. The carrier web, which has a sinusoidal corrugation with wave height of 7 µm and a wave period of 7 µm on its surface, imparts corrugations to the bottom surface of the film. The elastomer film on the carrier web is preheated to the gel point, where the elastomer film can retain an imprint made on it. The preheated film at gel point is embossed between the rolls of a gravure lab coater, which corrugates the top surface of the film. The films are then heated, in order to cure completely. For the LSR systems used in this process, the optimum conditions for preheating are 110°C for 4–7 s, while for embossing the temperature is 110°C with 25 psi pressure between the rolls at a speed of 1.4 rpm. Scanning electron microscope (SEM) images confirm the formation of microstructures on both the surfaces of the film.     

Ionic liquid intercalated clay nanofillers for chromatographic applications

In this study, the preparation and characterization of ionic liquid (IL) intercalated montmorillonite (MMT) and their application as a micro-solid phase extraction material for the determination of Chlorpyrifos (CP) pesticide in water samples were reported. The ionic liquids bearing different chain lengths [1-methyl-3-octylimidazolium bromide (C₈mimBr), 1-methyl-3-undecyl-imidazolium bromide (C₁₂mimBr) and 1-methyl-3-octadecyl-imidazolium bromide (C₁₈mimBr)] were intercalated in the galleries of MMT. The IL-intercalated MMTs were characterized by means of XRD and TG methods. The (C₁₂mimBr)-intercalated MMT had the highest sorption efficiency for the CP, which was 32 times higher than the original MMT. We also optimized the parameters for extracting CP from the (C₁₂mimBr)-intercalated MMT.     

Do ozone and boric acid affect microleakage in class V composite restorations?

The aim of this in vitro study was to evaluate the effects of chlorhexidine gluconate (2%), sodium hypochloride (2.5%), ozone gas, and boric acid at different concentrations (1%, 3%, 5%, and 7%) on microleakage from composite restorations.

In a total of 80 extracted human canine teeth, a class V cavity was opened on the buccal surface and the samples were separated into eight groups. In the control group, no procedure was applied for cavity disinfection, then composite restoration (Z250, 3M) was made using single-stage, self-etch adhesive (Single Bond 3M). In the other groups, seven different disinfectants were used, then the cavity was restored. The teeth were split into two in the buccolingual direction, parallel to the long axes. Stain penetration was examined under stereomicroscope and scored. Examination with SEM was made on one sample from each group, selected at random. Statistical evaluations were made using Dunnett C Post Hoc Comparison and Kruskal–Wallis H tests.

In the occlusal region evaluation, the groups with the lowest level of leakage were the 3% and 5% boric acid groups, and the highest levels of microleakage were determined in the chlorhexidine group and the 1% boric acid group. In the gingival region, the lowest level of microleakage was in the 5% boric acid group and the highest levels were determined in the 1% and 7% boric acid groups.

Boric acid disinfectants used at suitable concentrations were not seen to create a risk in respect of microleakage.     

THE EFFECT ON THE THERMAL EFFICIENCY OF LIME ADDED TO THE COMBUSTION CHAMBER FOR RETENTION ON SULPHUR

ABSTRACT

In order to prevent the emission of SO_x, with the flue gas, certain amount of the sulphur of the coal can be retained by adding an adequate amount of lime in the combustion chamber. In this study, two series of experiments were conducted by adding lime at the molar ratios of CaO/S = 0·5 to 2·0 using Ankara-Beypazan lignites, which have around 5 % sulphur content as received form. In one of the series lime was added directly in to the lump coal, and in the other, coal was briquetted together with lime using molasses as binder. It was observed from the experimental results that the increase in the lime ratio leads to an increase in the retained sulphur percentage while it leads to a considerable decrease in thermal efficiency. In order to retain 50 % of sulphur, it was necessary to add lime into lump coal at a CaO/S molar ratio of at least 1,1. This minimum ratio was 0·70 for briquetted coal. When lime was added at these ratios, the thermal efficiencies in the first case dropped to as low as 82 % and to 92 % in the second.