Photocatalytic Property and Electronic Structure of Lanthanide-based Oxysulfides

Lanthanide-based oxysulfides and sulfide, LnTaO_3.5S_0.5, Ln₁₀OS₁₄ (Ln = La, Pr, Nd, Sm) and La₄In₅S₁₃, were successively synthesized by sulfurization in a flowing H₂S. The sulfurization decreased the band-gap energies from >4 eV to <3eV, because of the formation of occupied S3p orbitals on the top of valence band. In accordance with the small band gap, the H₂ evolution from a 0.01 M Na₂S and 0.01 M Na₂SO₃ solution system was observed under irradiation of light up to >500 nm. The rate of H₂ evolution under light irradiation of >500 nm increased in the order of Ni/LaTaO_3.5S_0.5 < Ru/La₁₀OS₁₄ < Pt/La₄In₅S₁₃.     

Low-threshold, highly reliable 630 nm-band AlGaIP visible laserdiodes with AlInP buried waveguide

Low-threshold, highly reliable 630 nm-band AlGaInP visible laser diodes have been developed by employing a low-loss optical waveguide buried in the AlInP layer. A low-threshold current of 19 mA at 25°C is obtained with a cavity length of 310 μm. This current is the lowest value for 630 nm-band AlGaInP visible laser diodes, to our knowledge. Our AlInP-buried laser diodes with a cavity length of 500 μm operated over 7000 h without significant degradation at 60°C and 5 mW     

Production of Ceramic Green Bodies Using a Microwave-Reactive Organic Binder

Because the pyrolysis of organic substances can result in the emission of harmful pollutant gases, a reduction in the use of organic binders is one aim of today's ceramics industry. A novel ceramic-forming process was developed that requires considerably less organic binder than conventional techniques. The process involves immobilizing reactive molecules on the surfaces of the particles, which on subsequent irradiation with microwaves, form bridges that bind the entire particle assembly together. The chemical forces involved produce strong bonds, resulting in a significant reduction in the amount of organic binder that is required to maintain the shape of the ceramic green body. This method will help to decrease emissions of harmful gases produced from pyrolysis of the binder.     

Band Gap Modification of Diamond Photonic Crystals by Changing the Volume Fraction of the Dielectric Lattice

Photonic crystals with a diamond structure of epoxy lattices in which TiO₂-based ceramic particles are dispersed were fabricated by stereolithography. The periodicity of the lattice was designed to reflect electromagnetic waves in the gigahertz range. The volume fraction (β) of the dielectric lattice medium was modified from 14% to 33% by changing the rod diameter of the lattice. The photonic band gap was observed along Γ-L 〈111〉, Γ-X 〈100〉, and Γ-K 〈110〉 directions and the complete photonic band gap was formed at over β= 20%. The width of the forbidden gap increased gradually when the β increased over 14%, and reached 2.4 GHz at β= 33%. These results agreed with the band calculation using the plane wave expansion method.     

Designing elastomer network for desired tire performance characteristics

Rubber elasticity is associated with changes in configurational entropy of a long chain. Because the chain cannot change its configuration instantaneously, there is a time delay in deformation to an applied force. This delayed response is the source of viscoelasticity and hysteresis energy loss of elastomer networks. Many tire performance properties are related to the viscoelasticity of tire components. Wet and dry traction of tire is related to the energy loss of the tread material at very high frequencies. On the other hand, rolling resistance of tire is characterized by the energy loss of tread material at relatively low frequencies. The dynamic viscoelastic properties of elastomer network shows characteristic zones on a frequency scale. At very high frequencies the energy loss is controlled by the segmental motions of the polymer chain. At lower frequencies the energy loss is related to the longer range motions of the chain. A series of polymers was synthesized to study the effect of micro- and macro-structure of the polymer on the viscoelastic properties of tread compounds and their tire performance properties. As expected from the theory, the wet traction of the tire was highly correlated to the segmental motions of the chains; namely, the glass transition temperature of the polymer. The energy loss of the compounds at a higher temperature, however, was related to the macrostructure of the polymer chain. Those examples illustrate that the fundamental understanding of the theory of elastomer network allows a tire engineer to obtain the best balance of tire performance characteristics.     

Effect of center block structure on the physical and rheological properties of ABA block copolymers. Part II. Rheological properties

The effect of the chemical structure of the center block on the rheological properties of ABA block copolymers with polystyrene end blocks has been investigated. The chemical structure of the center blocks investigated in the present paper are polybutadiene, polyisoprene, ethylene/butene copolymer, ethylene/propylene copolymer and polydimethyl-siloxane. The chemical structure of the center block was found to have a pronounced effect on the rheological properties of the ABA block copolymer melts. The long range relaxation times of these block copolymer melts increases with increasing incompatibility between the styrene block and the center block. However, the rheological properties of the block copolymers are not influenced significantly by the glass transition or the entanglement molecular weight of the center block.     

Fabrication of TiO2–SiO2 Photonic Crystals with Diamond Structure

Ceramic photonic crystals with diamond structure were fabricated using stereolithography and successive sintering. The green body of an epoxy resin incorporating 10 vol% TiO₂–SiO₂ was formed by stereolithography and then heated in air at 1100°–1400°C for 2 h. The sintered products maintained the diamond structure with a linear shrinkage ratio of about 57% and a porosity of 38%. The ceramic photonic crystal with eight unit cells showed a photonic band gap at the center frequency of 23.5 GHz. This fabrication method of three-dimensional (3D) ceramic photonic crystals is applicable to other 3D structural ceramics and does not require any molding techniques.     

Formation, Characterization, and Hot Isostatic Pressing of Cr2O3-Doped ZrO2 (0,3 mol% Y2O3) Prepared by Hydrazine Method

In the ZrO₂-Cr₂O₃ system, metastable t -ZrO₂ solid solutions containing up to 11 mol% Cr₂O₃ crystallize at low temperatures from amorphous materials prepared by the hydrazine method. The lattice parameter c decreases linearly from 0.5149 to 0.5077 nm with increased Cr₂O₃ content, whereas the lattice parameter a is a constant value ( a = 0.5077 nm) regardless of the starting composition. At higher temperatures, transformation (decomposition) of the solid solutions proceeds in the following way: t (ss)→ t (ss) + m + Cr₂O₃→ m + Cr₂O₃. Above 11 mol% Cr₂O₃ addition, c-ZrO₂ phases are formed in the presence of Cr₂O₃. The t -ZrO₂ solid solution powders have been characterized for particle size, shape, and surface area. They consist of very fine particles (15–30 nm) showing thin platelike morphology. Dense ZrO₂(3Y)-Cr₂O₃ composite ceramics (∼99.7% of theoretical) with an average grain size of 0.3 μm have been fabricated by hot isostatic pressing for 2 h at 1400°C and 196 MPa. Their fracture toughness increases with increased Cr₂O₃ content. The highest K _Ic value of 9.5 MPa·;m^1/2 is achieved in the composite ceramics containing 10 mol% Cr₂O₃.     

Application of the Solvothermal Process in the Synthesis of High-performance Ag/γ-Al_2O_3 Catalysts

1 INTRODUCTION Since Cu-ZSM-5 was reported as an effective catalyst for the selective catalytic reduction (SCR) of NO by hydrocarbons in the presence of excess oxygen, the SCR of NOx has received much attention as a kind of potential technology for cleaning NOx in various oxygen-rich exhausts of diesel engine, lean burning gasoline engine and gas engine. Although a number of catalysts have been tested, to date, it still seems to be difficult to find a catalyst that is completely suit…     

Gas barrier properties and periodically fractured surface of thin DLC films coated on flexible polymer substrates

Thin DLC films coated on polymer surfaces are attracting considerable attention due to their wide applications and their interesting surface properties. When DLC films were coated on polymers, the resulting DLC-polymer composites are highly functionalized materials, some of which presenting dramatically improved gas barrier properties.In this paper, we will introduce several commonly used polymers including polyethylene terephthalate (PET), polyethylene (PE) and polypropylene (PP) for semi-crystalline polymers, and polymethyl methacyrlate (PMMA) for an amorphous polymer. The polymers were coated with thin DLC films and the gas barrier properties of the resulting DLC-polymer composites were investigated. Some of the DLC-polymer composites dramatically improved their gas barrier properties while they presented horizontal crack lines and vertical micro-buckling lines on the DLC surface when stretched to a certain strain. The gas barrier properties of the DLC-polymer composites with fractured DLC surface were also studied. It was found that the gas barrier property of the polymer substrates with lower residual strains was less damaged, when the substrates were mechanically deformed, than that of the polymer substrates with higher residual strains. When the number of the cracks increases, the strain imposed on each crack decreases, since the overall deformation is almost equally distributed to each crack while the crack spacing of each crack becomes shorter. Thus, it was found that the degradation of the gas barrier property after mechanical deformation is dependent on the residual strain of the polymers and the number of cracks on DLC films.