Effects of breed and age at slaughter on degradation of muscle lipids during processing of dry‐cured hams

Hams from Landrace, Duroc and Hampshire pigs slaughtered at ages 6, 7.5 and 9 months were processed to generate Norwegian Parma‐style hams. Lipid contents and the compositions of fatty acid classes (ΣSFA, ΣMUFA, ΣPUFA) within neutral lipids, phospholipids and free fatty acids were determined. Small differences in lipid degradation and composition of the classes were revealed. However, significant sensory differences related to lipids were observed. Breed was more important than age. Dry‐cured Hampshire hams gave a more intense mature odour that may be associated with higher overall lipid degradation. Unexpectedly, these hams also demonstrated high juiciness and tenderness, which could be related to the melting characteristics of the fat. Dry‐cured Duroc hams showed a higher susceptibility towards rancidity, presumably associated with preferential oxidation of n‐6 fatty acids relative to C18:1 n‐9. Dry‐cured Landrace hams showed the lowest juiciness and tenderness, likely due to their lower fat content (marbling).     

OWL2Vec*: embedding of OWL ontologies

Machine Learning - Semantic embedding of knowledge graphs has been widely studied and used for prediction and statistical analysis tasks across various domains such as Natural Language Processing...     

In Vivo Analysis of the Biocompatibility and Bone Healing Capacity of a Novel Bone Grafting Material Combined with Hyaluronic Acid

The present in vivo study analyses both the inflammatory tissue reactions and the bone healing capacity of a newly developed bone substitute material (BSM) based on xenogeneic bone substitute granules combined with hyaluronate (HY) as a water-binding molecule. The results of the hyaluronate containing bone substitute material (BSM) were compared to a control xenogeneic BSM of the same chemical composition and a sham operation group up to 16 weeks post implantationem. A major focus of the study was to analyze the residual hyaluronate and its effects on the material-dependent healing behavior and the inflammatory tissue responses. The study included 63 male Wistar rats using the calvaria implantation model for 2, 8, and 16 weeks post implantationem. Established and Good Laboratory Practice (GLP)-conforming histological, histopathological, and histomorphometrical analysis methods were conducted. The results showed that the new hyaluronate containing BSM was gradually integrated within newly formed bone up to the end of the study that ended in a condition of complete bone defect healing. Thereby, no differences to the healing capacity of the control BSM were found. However, the bone formation in both groups was continuously significantly higher compared to the sham operation group. Additionally, no differences in the (inflammatory) tissue response that was analyzed via qualitative and (semi-) quantitative methods were found. Interestingly, no differences were found between the numbers of pro- and anti-inflammatory macrophages between the three study groups over the entire course of the study. No signs of the HY as a water-binding part of the BSM were histologically detectable at any of the study time points, altogether the results of the present study show that HY allows for an optimal material-associated bone tissue healing comparable to the control xenogeneic BSM. The added HY seems to be degraded within a very short time period of less than 2 weeks so that the remaining BSM granules allow for a gradual osteoconductive bone regeneration. Additionally, no differences between the inflammatory tissue reactions in both material groups and the sham operation group were found. Thus, the new hyaluronate containing xenogeneic BSM and also the control BSM have been shown to be fully biocompatible without any differences regarding bone regeneration.     

Effects of cholestanol feeding and cholestyramine treatment on the tissue sterols in the rabbit

Rabbits were fed diets enriched with cholestanol or cholestereol (3.5 g/wk) for 4–12 weeks. During cholestanol feeding, the concentration of cholestanol in blood serum, liver, heart and aorta increased 15–30 times. In serum and liver, the concentration of cholesterol also increased. Cholestanol-fed rabbits developed inflammatory changes in the liver, with proliferation of small bile ducts. Liver tests were only slightly abnormal. Morphological atherosclerosis of the aorta was only occasionally seen in rabbits receiving cholestanol for eight weeks or less. During cholesterol feeding, the amounts of cholesterol in different tissues increased dramatically, most in the aorta. Morphological atherosclerosis in the aorta was found in all rabbits fed cholesterol-enriched diets for more than four weeks. Brain cholestanol was doubled in rabbits fed cholestanol for eight weeks, whereas brain sterols did not change significantly during cholesterol feeding. After an additional regression period with cholestyramine for eight weeks, the increased content of cholestanol in the brain was unchanged in cholestanol-fed rabbits. These observations are discussed in relation to the cholestanolosis of the brain that develops in the rare inherited human disease cerebrotendinous xanthomatosis.     

Engineering Analysis and Design with ALE-VMS and Space–Time Methods

Flow problems with moving boundaries and interfaces include fluid–structure interaction (FSI) and a number of other classes of problems, have an important place in engineering analysis and design, and offer some formidable computational challenges. Bringing solution and analysis to them motivated the Deforming-Spatial-Domain/Stabilized Space–Time (DSD/SST) method and also the variational multiscale version of the Arbitrary Lagrangian–Eulerian method (ALE-VMS). Since their inception, these two methods and their improved versions have been applied to a diverse set of challenging problems with a common core computational technology need. The classes of problems solved include free-surface and two-fluid flows, fluid–object and fluid–particle interaction, FSI, and flows with solid surfaces in fast, linear or rotational relative motion. Some of the most challenging FSI problems, including parachute FSI, wind-turbine FSI and arterial FSI, are being solved and analyzed with the DSD/SST and ALE-VMS methods as core technologies. Better accuracy and improved turbulence modeling were brought with the recently-introduced VMS version of the DSD/SST method, which is called DSD/SST-VMST (also ST-VMS). In specific classes of problems, such as parachute FSI, arterial FSI, ship hydrodynamics, fluid–object interaction, aerodynamics of flapping wings, and wind-turbine aerodynamics and FSI, the scope and accuracy of the FSI modeling were increased with the special ALE-VMS and ST FSI techniques targeting each of those classes of problems. This article provides an overview of the core ALE-VMS and ST FSI techniques, their recent versions, and the special ALE-VMS and ST FSI techniques. It also provides examples of challenging problems solved and analyzed in parachute FSI, arterial FSI, ship hydrodynamics, aerodynamics of flapping wings, wind-turbine aerodynamics, and bridge-deck aerodynamics and vortex-induced vibrations.     

Creating geometrically robust designs for highly sensitive problems using topology optimization

Resonance and wave-propagation problems are known to be highly sensitive towards parameter variations. This paper discusses topology optimization formulations for creating designs that perform robustly under spatial variations for acoustic cavity problems. For several structural problems, robust topology optimization methods have already proven their worth. However, it is shown that direct application of such methods is not suitable for the acoustic problem under consideration. A new double filter approach is suggested which makes robust optimization for spatial variations possible. Its effect and limitations are discussed. In addition, a known explicit penalization approach is considered for comparison. For near-uniform spatial variations it is shown that highly robust designs can be obtained using the double filter approach. It is finally demonstrated that taking non-uniform variations into account further improves the robustness of the designs.     

3D interactive topology optimization on hand-held devices

This educational paper describes the implementation aspects, user interface design considerations and workflow potential of the recently published TopOpt 3D App. The app solves the standard minimum compliance problem in 3D and allows the user to change design settings interactively at any point in time during the optimization. Apart from its educational nature, the app may point towards future ways of performing industrial design. Instead of the usual geometrize, then model and optimize approach, the geometry now automatically adapts to the varying boundary and loading conditions. The app is freely available for iOS at Apple’s App Store and at http://www.topopt.dtu.dk/TopOpt3D for Windows and OSX.     

Thermodynamic modeling of the Na–Al–Ti–H system and Ti dissolution in sodium alanates

Thermodynamic assessments were made to optimize thermodynamic models and parameter fits to selected experimental and first principles hypothetical predicted phase data within the Na–Al–Ti–H system. This enabled thermodynamic modeling of Ti solubility within the sodium alanates: NaAlH₄ and Na₃AlH₆, and the relative stability of Ti-bearing phases. The modeling provides insights into the role of Ti originating from Ti-based activating agents commonly referred to as ‘catalysts’ in promoting reversibility of the Na–Al–H dehydrogenation and rehydrogenation reactions under moderate temperature and pressure conditions relevant to H storage applications. Preliminary assessments were made to evaluate H solubility in bcc-Ti and hcp-Ti, and stability of the hydride δ-TiH₂. To model possible Ti dissolution in NaAlH₄ and α-Na₃AlH₆, sub-lattice models were applied. A repulsive interaction is predicted by first principles calculations when Ti is dissolved in NaAlH₄ or α-Na₃AlH₆, which becomes stronger with increasing temperature. Although Ti is virtually insoluble in NaAlH₄ or α-Na₃AlH₆, a small addition of TiCl₃ will induce a thermodynamic driving force for formation of TiH₂ and/or TiAl₃. The addition of pure Ti shows a weaker effect than TiCl₃ and leads to formation of TiH₂ only. Based on a combined interpretation of present thermodynamic modeling and prior experimental observations, the TiAl₃ and TiH₂ phases are ascribed to have a catalytic effect, not a thermodynamic destabilization effect, on the reversibility of the dehydrogenation/rehydrogenation reactions in the Na–Al–H system.     

Non-Hierarchical Architected Materials with Extreme Stiffness and Strength

Stretch-dominated truss and plate microstructures are contenders in the quest for realizing architected materials with extreme stiffness and strength. In the low volume fraction limit, closed-cell isotropic plate microstructures meet theoretical upper bounds on stiffness but have low buckling strength, whereas open-cell truss microstructures have high buckling strength at the cost of significantly reduced stiffness. At finite volume fractions, the picture becomes less clear but both are outperformed by hollow truss lattice and hierarchical microstructures in terms of buckling strength. Despite significant advances in manufacturing methods, hollow and multi-scale hierarchical microstructures are still challenging to build. The question is if there exist realizable microstructures providing stiffness and strength matching or even beating hard-to-realize hollow or hierarchical microstructures? Herein, single-scale non-hierarchical (first order) microstructures that beat the buckling strength of hollow truss lattice structures by a factor of 2.4 and first- and second-order plate microstructures by factors of 5 and 1.4, respectively, are systematically designed, built, and tested. Stiffness of the microstructures is within 40% of theoretical bounds and beats both truss and second order plate microstructures. The microstructures are realized with 3D printing. Experiments validate theoretical predictions and additional insight is provided through numerical modeling of a CT-scanned sample.     

On projection methods,convergence and robust formulations in topology optimization

Mesh convergence and manufacturability of topology optimized designs have previously mainly been assured using density or sensitivity based filtering techniques. The drawback of these techniques has been gray transition regions between solid and void parts, but this problem has recently been alleviated using various projection methods. In this paper we show that simple projection methods do not ensure local mesh-convergence and propose a modified robust topology optimization formulation based on erosion, intermediate and dilation projections that ensures both global and local mesh-convergence.