Window materials for high power gyrotron

The room temperature application of sapphire as window material at higher frequencies is not feasible since its absorption coefficient increases almost linearly with increasing frequency in the millimeter wavelength region. At cryogenic temperature the absorption coefficient value decreases only by a few factors (factor of 2 to 3) in the 90 – 200 GHz region. The earlier reported temperature squared dependence (decrease) in the absorption coefficient or the loss tangent value is totally absent in our broad band continuous wave data we are reporting here (at 6.5 K, 35K, 77K and 300K) and one we reported at conferences earlier. Our results are verified by another technique. We utilize our precision millimeter wave dispersive Fourier transform spectroscopic techniques at room temperature and at cryogenic temperatures The extra high resistivity single crystal compensated silicon is no doubt the lowest loss material available at room temperature in the entire millimeter wavelength region At higher millimeter wave frequencies an extra high resistivity silicon window or an window made with extra high resistivity silicon coated with diamond film would certainly make a better candidate in the future. A single free standing synthetic diamond window seems to have higher absorption coefficient values at millimeter wavelength region at this time although it is claimed that it possesses good mechanical strength and higher thermal conductivity characteristics. It certainly does not rule out the use of diamond film on a single crystal high resistivity silicon to improve its mechanical strength and thermal conductivity     

Knowledge Diffusion of the Internet of Things (IoT): A Main Path Analysis

Wireless Personal Communications - The Internet of Things (IoT) is a concept that has attracted significant attention since the emergence of wireless technology. The knowledge diffusion of IoT...     

An Approach Method to Calibrate the Autocollimator with Small Angle Measurement Range

A new method to calibrate the autocollimator with small angle measurement range has been developed. This method used a system based on rotary encoder for angle measurements with self-calibration function (SelfA47). The SelfA47 has 18,000 graduation lines with angle interval of 0.02°, corresponds to 72 arcsec. Thereby this system cannot be used to calibrate the autocollimator with measurement range <72 arcsec. On the other hand, SelfA47 can be used to calibrate an electronic level. The deviation of electronic level shaped linear gradient. Therefore a small nominal gradient of electronic level can be approximated by interpolation. Since the gradient of a curve corresponds to the angle quantities, it is feasible to calibrate the autocollimator with nominal angle <72 arcsec using SelfA47 and an electronic level. In this proposed method, SelfA47 is placed horizontally on the same plane with electronic level and mirror reflector position. The electronic level value that have been corrected by SelfA47 is used as a reference. This reference value was converted to the angle, thus the angle deviation of autocollimator can be determined. The prominent uncertainty of angle measurement using this new technique derived from the uncertainty of electronic level and rotary encoder. Using this method, the expanded uncertainty of 0.36 arcsec is obtained from calibration of autocollimator with measuring range of ±20 arcsec and it is consistent statistically with the manufacturer calibration result shown by E _n value is <1. In conclusion, this approach method can be applied to calibrate the autocollimator with a resolution smaller than SelfA47 as standard, but it is not recommended for the calibration of highly accurate autocollimator.     

Exploring the relationship between Internet ethics in university students and the big five model of personality

The widespread use of the Internet and the convenient mechanism it provides, such as easy access, easy downloads, and easy copy and paste functions have made many types of unethical behaviors easier, particularly those involving students in academic settings. Among the issues in ethics within the academic environment that can be triggered by the Internet are fraudulence, plagiarism, falsification, delinquency, unauthorized help, and facility misuse. Given these issues, the study seeks to investigate the extent to which students at a public university in Malaysia engage in such unethical behavior and their relationship with the big five personality model. This study was conducted using a survey method of 252 students in three different academic faculties. The results of factor analyses confirm and refine the reliability of the scales for both big five personality variables and unethical Internet behaviors as conceptualized through Internet triggered academic dishonesty (ITADS). The findings indicate that personality traits such as (1) agreeableness, (2) conscientiousness and (3) emotional stability are significantly and negatively correlated with unethical Internet behavior in university students. Significant differences in facility misuse are also observed between the three academic faculties investigated. This research should provide significant contributions to educators in designing the computer ethics curriculum and in allowing for educational institutions as well as other organizations in developing relevant policies and guidelines on matters pertaining to academic conduct, utilization of computers and Internet, and recruitment exercises.     

Shear analysis of rice husk ash (RHA) reinforced tin-0.7-copper composite solders on electroless nickel/immersion silver (ENIAg) surfaces

In this study, the mechanical performance of the rice husk ash-reinforced tin-0.7 copper composite solder was investigated. 0.01 wt.%, 0.05 wt.% and 0.1 wt.% of rice husk ash (RHA) were added to the solder matrix to prepare the composite solders. In order, to replace the costly electroless nickel immersion gold surface finish on the copper substrate, the effect of electroless nickel immersion silver (ENIAg) as the surface finish was studied. The differential scanning calorimetry (DSC) analysis showed that the composite solder exhibited lower melting temperature relative to the plain solder owing to the inclusion of rice husk ash. Shear strength analysis was carried out to investigate the influence of rice husk ash and electroless nickel immersion silver surface finish on the shear strength of the developed composite solders. The results proved that the rice husk ash failed to enhance the shear strength of tin-0.7 copper lead-free solder with the plain solder exhibiting the highest shear strength.     

Design of filtering directional coupler with improved performance

This letter presents a filtering directional coupler (FDC) with enhanced coupling and high directivity simultaneously. The proposed FDC is composed of a pair of coupled lines instead transmission line of a directional coupler. This coupled lines resonator increases the design parameters by which even/odd mode phase velocity can be compensated to improve the directivity and coupling level. The coupling enhancement can be explained by analyzing the even mode and odd mode circuit of the proposed coupler. A prototype of the proposed coupler is designed which provides a high directivity of 44 dB for 6 dB coupling level at 1 GHz frequency. The proposed coupler is designed, fabricated, and tested.     

Physicochemical Properties,Fatty Acid Profiles,and Sensory Characteristics of Fermented Beef Sausage by Probiotics Lactobacillus plantarum IIA‐2C12 or Lactobacillus acidophilus IIA‐2B4

Probiotics may be used to enhance the functionality and nutritional values of fermented sausages. This study aims to evaluate the physicochemical and sensory properties of beef sausages fermented by lactic acid bacteria of Lactobacillus plantarum IIA‐2C12 and L. acidophilus IIA‐2B4. These strains were isolated from beef cattle and have shown to display probiotic features. While the nutrient contents were not affected by the probiotics, the pH, texture, and color varied among the sausages. Further analysis on fatty acids showed different profiles of saturated (C14:0, C17:0, and C20:0) and unsaturated (C14:1, C18:1n9c, C18:2n6c, and C22:6n3) fatty acids in sausages with probiotics. Gas chromatography–mass spectrometry further revealed some flavor development compounds including acid, alcohols, aldehydes, aromatic, ketones, sulfur, hydrocarbons and terpenes, varied among the sausages. Hedonic test showed no difference in the preference toward aroma, texture, and color for untrained panelists.     

Natural Palm Olein Polyol as a Replacement for Polyether Polyols in Viscoelastic Polyurethane Foam

The impact of replacing three polyether polyols with different levels of a single palm olein‐based natural oil polyol (NOP) was systematically correlated with the changes in foaming reactivity, cell structure, physico‐mechanical properties, and morphology of viscoelastic (VE) foams. The data show that replacing the polyether polyols with the NOP slightly increased the rate of the foaming reactivity. Increasing the NOP content resulted in increased cell size and cells remained fully open. Increased NOP content contributed to higher load bearing properties of VE foam, which can be attributed to higher functionality of NOP compared to polyether polyols. Addition of the NOP slightly increased the resilience of the foams, however, the hysteresis which is the measure of energy absorption remained mostly unaffected. Age properties, characterized by dry and humid compression sets, were mostly unaffected by the replacement of the polyether polyol with the NOP. The addition of NOP did not impact the morphology of the VE foam polymer matrix, which appears to retain a low degree of hard and soft segment domain separation. Overall, the results demonstrate a feasibility that the NOP can be used to partially replace the polyether polyols in VE polyurethane foams without significant impact on the functional performance.     

Sepiolite hybridized commercial fillers,and their effects on curing process,mechanical properties,thermal stability,and flammability of ethylene propylene diene monomer rubber composites

Ethylene propylene diene monomer rubber (EPDM)-based composites containing sepiolite (sep) hybridized with calcium carbonate (CaCO₃), silica (Sil) or carbon black (CB) were prepared on a two-roll mill. The influence of fillers’ contents on the curing, mechanical, thermal and flammability of the composites was investigated. In comparison with EPDM/sep at 30 parts per hundred rubbers (phr) as a control composite, EPDM/sep/CB composites exhibited an outstanding improvement in tensile strength followed by EPDM/sep/Sil and EPDM/sep/CaCO₃ composites. EPDM/sep/CB displayed the highest thermal stability and also improved flammability resistance. In addition, a higher amount of carbon black gave higher tensile strength. The results were influenced by the ability of CB to disperse well and form protective layers acting as mass transport barriers in the matrix. The field emission scanning electron microscopy analyses proved better dispersion of CB in the matrix. The presence of protective layers on the surface of samples consequently improved the thermal properties of the EPDM composites. The mechanism of formation of char protective layer in hybrid EPDM composites was also investigated based on morphological observations of char residues. According to this work, Sil and CB were able to hybrid with sep, while sep could be a potential substitution of CaCO₃ in the EPDM composites.