Time Decay of the Activity of the Reduction Reaction of NO by CO on a Pd/Al2O3 Catalyst

An experimental study is made of the time decay of activity of the CO–NO reaction on a Pd/Al₂O₃ looking at the effect on reaction order and apparent activation energy. The optimum kinetics parameters fitting the steady state data at moderate pressures are determined. The time decay curves are analyzed through various catalyst deactivation models.     

Degradation of wine industry wastewaters by photocatalytic advanced oxidation.

Wine industry wastewaters contain a high concentration of organic biodegradable compounds as well as a great amount of suspended solids. These waters are difficult to treat by conventional biological processes because they are seasonal and a great flow variation exists. Photocatalytic advanced oxidation is a promising technology for waters containing high amounts of organic matter. In this study we firstly investigated the application of H2O2 as oxidant combined with light (artificial or natural) in order to reduce the organic matter in samples from wine industry effluents. Secondly, we studied its combination with heterogeneous catalysts: titanium dioxide and clays containing iron minerals. The addition of photocatalysts to the system reduces the required H2O2 concentration. Although the H2O2/TiO2 system produces higher efficiencies, the H2O2/clays system requires a H2O2 dosage between three and six times lower.     

A wind park reduced-order model using singular perturbations theory

Due to the increasing penetration of wind energy, it is necessary to possess design tools that are able to simulate the impact of these installations on electric utility grids. In order to provide a net contribution to this issue, a detailed wind park model has been developed and is briefly presented. However, the computational costs associated with the performance of such a detailed model in describing the behavior of a wind park composed by a considerable number of units may render its practical application very difficult. To overcome this problem, singular perturbations theory has been applied to reduce the order of the detailed wind park model, and therefore create the conditions for the development of a dynamic equivalent which is able to retain the relevant dynamics with respect to the existing AC power system. Validation results proving the ability of singular perturbations reduced order model to match the results provided by the detailed model are shown and commented upon     

Bone marrow biopsy in the diagnosis of fever of unknown origin in patients with acquired immunodeficiency syndrome

BACKGROUND: Fever is commonly observed in patients with human immunodeficiency virus (HIV) disease and frequently eludes diagnosis. The role of bone marrow biopsy in the diagnosis of fever of unknown origin in patients infected with HIV remains controversial. PATIENTS AND METHODS: One hundred twenty-three consecutive patients with 137 episodes of fever lasting 10 or more days without diagnosis after 1 week of hospitalization were evaluated by bone marrow biopsy. RESULTS: Overall, a specific diagnosis was achieved in 52 episodes by means of culture and histopathological examination (diagnostic yield, 37.9%). Three types of disease were found: mycobacterial infections (n = 36, 69% of documented episodes), including 18 patients with disseminated tuberculosis and 14 with Mycobacterium avium-intracellulare complex infections; non-Hodgkin lymphomas (n = 12, 23%); and visceral leishmaniasis (n = 4, 8%). Although bone marrow cultures were more sensitive than microscopic examination with special stains for the diagnosis of mycobacterial infections, the pathological examination of bone marrow led to a more rapid diagnosis of disease. In addition, the histopathological examination of bone marrow alone led to the diagnosis of a specific condition in 43 episodes (31.3% of all episodes). CONCLUSIONS: Bone marrow biopsy is a useful procedure for the diagnosis of fever in patients with advanced HIV disease, particularly in areas where tuberculosis and leishmaniasis are prevalent. Involvement of the marrow may be the first indication of the existence of extranodal non-Hodgkin lymphoma. For Mycobacterium avium-intracellulare complex infection, blood cultures were more sensitive than bone marrow biopsy.     

Carbonitriding of Clay: Relation between the Weight Loss and Crystalline Phases during Reaction

β'-Sialons are phases of the Si-Al-O-N system. The carbonitriding of clays and kaolins is a preparation method. The reaction mechanism of clay carbonitriding is verified by means of the relation among crystalline phases formed and the weight loss produced in the samples during the reaction. Two clays were previously mixed with carbon black and pressed into pellets, flowing through N₂ atmosphere, at five temperatures within the range 1335–1427°C. The phases formed (XRD)—mullite, SiC, β'A-sialon, and oxynitrides—were related to the weight loss measured in the pellet independently of reaction temperature and time. The β'A-sialon and the nitrogenous phases were formed from SiC and mullite. A z value decrease for β'A-sialon was observed during reaction progression.     

Performance and energy task migration model for heterogeneous clusters

The Journal of Supercomputing - This article presents a set of linear regression models to predict the impact of task migration on different objectives, like performance and energy consumption. It...     

Invariant three- and four-phase equilibria in the magnesium-rich corner of the Mg-Cu-Sn ternary system

Invariant three- and four-phase equilibria in the magnesium-rich corner of the Mg-Cu-Sn ternary system have been studied by differential thermal analysis, optical microscopy, electron probe microanalysis and X-ray diffraction. The L(Mg) + Mg₂ Cu + Mg₂Sn ternary eutectic reaction was found to be at 467 °C and at Mg–13.5 at % Cu–4.4 at% Sn. The LMg₂Cu + Mg₂Sn pseudo-binary eutectic reaction is tentatively located at 522°C and at Mg–26.0 at % Cu–7.7 at % Sn.     

Near infrared light-induced disassembly of polymeric micelles based on methylene blue conjugated polyethylene glycol

Light-sensitive drug delivery systems are considered ideal for applications in the biomedical fields for their ability to release the payload in an on-demand spatiotemporal controlled manner through the manipulation of the light source. Among the broad radiation spectrum, near infrared (NIR) light is considered advantageous compared to UV and visible light, due to its inherently lower photodamage to normal tissues and deeper penetration to lesion areas. In this study, we report a successful synthesis of a polymer capable of undergoing partial degradation upon irradiation with NIR light by conjugating 10-N-carbamoyl linkage methylene blue (MB) moiety, a NIR photocleavable ligand, with polyethylene glycol (PEG). Through effective coupling of MB, a hydrophobic moiety, to the hydrophilic PEG molecule, an amphiphilic polymer was synthesized, as demonstrated by a lowered surface tension (55 mN/m at 0.1% wt/vol). Subsequently, photo-induced reversal of surface activity associated with self-assembled structure disruption, was displayed by surface tension measurements, size distribution analysis, and burst release profile of paclitaxel (PTX) from polymeric micelles upon the exposure to NIR irradiation.     

Biodegradability and improved mechanical performance of polyhydroxyalkanoates/agave fiber biocomposites compatibilized by different strategies

In this work, biocomposites made of polyhydroxyalkanoates (PHA) with natural fibers were produced via compression molding. In particular, polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-hydroxyvalerate (PHBV) were reinforced with 20 wt% of agave fibers. Different compatibilization strategies were investigated to improve the fiber-matrix interaction: fiber surface treatment in PHA solution, fiber surface treatment in maleated PHA solution, fiber propionylation, and extrusion with maleated PHA. The biocomposites were characterized in terms of morphology, mechanical properties, water absorption, and biodegradability by CO₂ production tracking. In general, fiber propionylation was the best strategy for mechanical properties enhancement and water uptake decreasing. Biocomposites with propionylated fibers showed improved flexural strength (170% for PHB and 84% for PHBV). The flexural modulus was also enhanced with propionylated fibers up to 19% and 18% compared to uncompatibilized biocomposites (PHB and PHBV, respectively). Tensile strength increased by 16% (PHB) and 14% (PHBV), and the water absorption was reduced using propionylated fibers going from 6.6% to 4.4% compared with biocomposites with untreated fibers. Most importantly, the impact strength was also improved for all biocomposites by up to 96% compared with the neat PHA matrices. Finally, it was found that the compatibilization did not negatively modify the PHA biodegradability.