Simulation of the submerged energy nozzle-mold water model system using laser-optical and computational fluid dynamics methods

The present work describes quantitative digital particle image velocimetry measurements of a full-scale water model of a thin slab mold. Different casting speeds and two submerged entry nozzles with one and two outlet ports have been investigated. The flow pattern of the single-port nozzle shows a counterclockwise-rotating double vortex that is nearly steady-state but leads to high stationary surface waves. The flow jets out of the two-port nozzle oscillate and produce a transient flow pattern with low wave amplitudes. The amplitudes for the one-port nozzle show a linear variation with the volumetric flow rate. The experimental results lead to a good interpretation of the flow phenomena and are used to validate steady-state numerical simulations with the commercial program, CFX, on the basis of the Reynolds equations. To describe anisotropic turbulence effects, the Reynolds stress model (RSM) is used for the flat single-port nozzle and the standard k-ɛ model for the mold flow. The calculated mean velocities and wave amplitudes, predicted from pressure distribution at the water surface, are generally in the consensus of the experimental data. An erratum to this article is available at .     

A Historical View of Studies of Women’s Work

Computer Supported Cooperative Work (CSCW) - This paper places observational studies of women’s work in historical perspective. We present some of the very early studies (carried out in the...     

Algal phagostimulants for marine herbivorous gastropods

Methanol extracts of the green algaUlva pertusa contain four kinds of glycerolipids that are active as feeding-stimulants for marine herbivorous gastropods. These compounds are digalactosyldiacylglycerol (DGDG), 1,2-diacylglycerly-4-O-(N,N,N-trimethyl)-homoserine (DGTH), 1-monoacylglyceryl-4'-O-(N,N,N-trimethyl)-homoserine (MGTH), and 6-sulfoquinovosyldiacylglycerol (SQDG). The various gastropods exhibit marked specificity, however, as young abaloneHaliotis discus respond to DGDG and DGTH at minute dosages of 20–30 g/sample zone, but do not respond to 300 g of SQDG, which is a phagostimulant for two other kinds of gastropods,Turbo comutus andOmphalius pfeifferi.Chemical Studies on Phagostimulants for Marine Gastropods. Part VI. For Part V, see Sakata et al. (1986b).     

Feeding-stimulant activity of algal glycerolipids for marine herbivorous gastropods

Phagostimulant activity of glycerolipids such as digalactosyldiacylglycerol (DGDG), 6-sulfoquinovosyldiacylglycerol (SQDG), phosphatidylcholine (PC), phosphatidylethanolamine (PE), etc., have been examined using the Avicel plate method for three kinds of marine herbivorous gastropods, the abaloneHaliotis discus, the turban shellTurbo cornutus, and the topshellOmphalius pfeifferi. DGDG showed strong activity for all the test animals. SQDG was much less active than the other glycerolipids for abalone. The turban shell and the top shell responded more or less sensitively to all tested glycerolipids at doses of 10–20g/sample zone.Chemical Studies on Phagostimulants for Marine Gastropods. Part VIII. For Part VII, see Sakata et al. (1988a).     

Spezifische Bedarfe bei zahnärztlichen Patienten mit Demenz und ihre ethischen Implikationen

Definition of the problem

The central foundations of successful dental treatment consist of a trustful patient-dentist relationship, the professional and psychosocial expertise of the team treating the patient, and consideration of ethical aspects both during the therapeutic decision-making process and during the subsequent execution of therapy. This is especially true of the dental treatment of (mostly elder) persons with dementia, calling for an in-depth assessment of the various normative implications.

Arguments

In geriatric dentistry in particular, situational dilemmas regarding treatment often arise from specific constellations (e.?g. greatly reduced potential for dental therapy, lack of ability regarding oral hygiene and lack of individual patient responsibility) combined with an acute need for treatment and the necessary involvement of third parties. These dilemmas frequently place additional professional and normative demands on the dentist. The current contribution discusses this specific situation, first by way of theoretical discourse and subsequently with a case-related approach on the basis of two case histories.

Conclusion

It becomes clear here that classic state-of-the-art therapies are replaced by “compromise treatment” in many cases in geriatric dentistry. Such treatment follows divergent diagnostic and therapeutic rules, poses changed requirements in terms of communication and presents specific ethical challenges and pitfalls.

     

On the relationship between subjective and objective measures of fatigue

Objective: Objective and subjective methods have been used in the past to assess workplace fatigue, but little is known about correlations between them. We examine correlations between subjective and objective measures, including measures collected in a workplace scenario. Methods: 15 young and 17 older participants were assessed before and after work with four types of fatigue measure: objective physical (posturography), objective mental (psychomotor vigilance task), subjective physical and mental (self-assessment), objective and subjective realistic (oculomotor behaviour, observer-rated facial expression, typing performance). Results: Pre- and post-test scores were analysed with an ANOVA, significant differences were submitted to a factor analysis. It yielded three factors: one representing posturography, the second self-rated mental and physical fatigue and the third observer-rated facial expression. Conclusions: Results advocate the existence of three independent fatigue components: Objective physical fatigue, introspective and extrospective fatigue.

Practitioner Summary: This study analyses correlations between different subjective and objective fatigue markers to better understand the complex nature of workplace fatigue. Measurements were conducted directly at the workplace. Results reveal that fatigue comprises three independent fatigue components: Objective physical fatigue, introspective and extrospective fatigue.     

A constraint-based variability modeling framework

Constraint-based variability modeling is a flexible, declarative approach to managing solution-space variability. Product variants are defined in a top-down manner by successively restricting the admissible combinations of product artifacts until a specific product variant is determined. In this paper, we illustrate the range of constraint-based variability modeling by discussing two of its extreme flavors: constraint-guarded variability modeling and constraint-driven variability modeling. The former applies model checking to establish the global consistency of product variants which are built by manual specification of variations points, whereas the latter uses synthesis technology to fully automatically generate product variants that satisfy all given constraints. Each flavor is illustrated by means of a concrete case study.     

Organisation, ‘anchoring’ of knowledge,and innovative activity in construction

The construction industry is characterised by the widespread use of project organisation. It has been suggested that the relatively low level of innovative activity in the industry can be explained by the temporary nature of firm boundary‐crossing projects. Survey data from the Danish construction industry is used to investigate the importance of learning and ‘anchoring’ of project‐specific knowledge at the firm level for participation in innovative activities. The data cover both the overall Danish construction industry and a specific region, North Jutland, which has a relatively high specialisation of construction workers. Latent class and regression analyses reveal that firms that make extensive use of partnering, together with internal product and process evaluation and knowledge diffusion (labelled ‘knowledge‐anchoring mechanisms’), are more likely to participate in innovative activities than firms which make less use of these mechanisms. This indicates that construction firms are able to compensate for the problems that temporary interorganisational projects may cause in relation to continuous learning at the firm level.     

Identification of Small Regions of Overlap from Copy Number Variable Regions in Patients with Hypospadias

Hypospadias is a common form of congenital atypical sex development that is often associated with other congenital comorbidities. Many genes have been associated with the condition, most commonly single sequence variations. Further investigations of recurrent and overlapping copy number variations (CNVs) have resulted in the identification of genes and chromosome regions associated with various conditions, including differences of sex development (DSD). In this retrospective study, we investigated the DECIPHER database, as well as an internal institutional database, to identify small recurrent CNVs among individuals with isolated and syndromic hypospadias. We further investigated these overlapping recurrent CNVs to identify 75 smallest regions of overlap (SROs) on 18 chromosomes. Some of the genes within these SROs may be considered potential candidate genes for the etiology of hypospadias and, occasionally, additional comorbid phenotypes. This study also investigates for the first time additional common phenotypes among individuals with hypospadias and overlapping CNVs. This study provides data that may aid genetic counseling and management of individuals with hypospadias, as well as improve understanding of its underlying genetic etiology and human genital development overall.