Characterising and exploiting workloads of highly interactive video-on-demand

This paper presents a detailed characterisation of user behaviour for a series of interactive video experiments over a 12 month period, in which we served popular sporting and musical content. In addition to generic VCR-like features, our custom-built video-on-demand application provides advanced interactivity features such as bookmarking. The dramatic impact of such functionality on how users consume content is studied and analysed. We discuss in detail how this user behaviour can be exploited by content distributors to improve user experience. Specifically, we study how simple dynamic bookmark placement and interactivity-aware content pre-fetching and replication can reduce the impact of highly interactive media on CDN performance.     

On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth

Obtained results of micro and nano studies reveal that bismuth refines the silicon in which the flake silicon changed to lamellar structure with reduction in twin spacing from 160 to 75 nm. Bismuth segregates towards the inter-dendritic regions and decreases the Al-Si contact angle resulting in suppression of the silicon growth causing refinement of the eutectic structure. Increased recalescence temperature and time confirmed that the refinement effect is attributed to the growth stage.     

Evaluation of alumina reinforced oil fly ash composites prepared by spark plasma sintering

The thermomechanical behavior of micro/nano-alumina (Al₂O₃) ceramics reinforced with 1-5 wt.% of acid-treated oil fly ash (OFA) was investigated. Composites were sintered using spark plasma sintering (SPS) technique at a temperature of 1400°C by applying a constant uniaxial pressure of 50 MPa. It was evaluated that the fracture toughness of micro- and nanosized composites improved in contrast with the monolithic alumina. Highest fracture toughness value of 4.85 MPam^1/2 was measured for the nanosized composite reinforced with 5 wt.% OFA. The thermal conductivity of the composites (nano-/microsized) decreased with the increase in temperature. However, the addition of OFA (1-5 wt.%) in nanosized alumina enhanced the thermal conductivity at an evaluated temperature. Furthermore, a minimum thermal expansion value of 6.17 ppm*K⁻¹ was measured for nanosized Al₂O₃/5 wt.% OFA composite. Microstructural characterization of Al₂O₃-OFA composites was done by x-ray diffraction and Raman spectroscopy. Oil fly ash particles were seen to be well dispersed within the alumina matrix. Moreover, the comparative analysis of the nano-/microsized Al₂O₃/OFA composites shows that the mechanical and thermal properties were improved in nanosized alumina composites.     

Catalytic oxidative desulfurization of gasoline using phosphotungstic acid supported on MWW zeolite

Catalysts for the desulfurization of gasoline samples were synthesized via the immobilization of well-dispersed phosphotungstic acid (HPW) on Mobil composition of matter-twenty-two (MWW) zeolite. Characterization results indicated that these catalysts possess a mesoporous structure with the retention of the Keggin structure of immobilized HPW. Relevant reaction parameters influencing sulfur removal were systematically investigated, including HPW loading, catalyst dosage, temperature, initial S-concentration, molar ratio of oxidant to sulfide (O/S), volume ratio of MeCN to model oil (Ext./oil), and sulfide species. The 40 wt-% HPW/MWW catalyst exhibited the highest catalytic activity with 99.6% dibenzothiophene sulfur removal from prepared samples. The 40 wt-% HPW/MWW catalyst was recycled four times and could be easily regenerated. Finally, as an exploratory study, straight-run-gasoline and fluid catalytic cracking gasoline were employed to accurately evaluate the desulfurization performance of 40 wt-% HPW/MWW. Our research provides new insights into the development and application of catalysts for desulfurization of gasoline.     

Transesterification of Palm-based Methyl Palmitate into Esteramine Catalyzed by Calcium Oxide Catalyst

The technology for transesterification reactions between methyl esters and alcohols is well established by using classical homogeneous alkaline catalysts, which provide high conversion of methyl esters to specialty or nonindigenous esters. However, in certain products where the purity of the esters is of concern, the removal of homogeneous catalysts after the completion of the reaction is a challenge in terms of production cost and water footprint. Therefore, a study to investigate the potential of heterogeneous catalysts was conducted on reactions between methyl palmitate and triethanolamine. The degree of basicity and active surface area of calcium oxide (CaO), zinc oxide (ZnO), and magnesium oxide (MgO) were first characterized by using temperature-programmed desorption (TPD-CO₂) and Brunauere–Emmett–Teller (BET), respectively. Among the metal oxides investigated, the CaO catalyst showed the best catalytic activity toward the transesterification process as it gave the highest conversion of methyl palmitate and yielded fatty esteramine compositions similar to the conventional homogeneous catalyst. The optimum transesterification condition by using the CaO catalyst utilized a lower vacuum system of approximately 200 mbar, which could minimize a considerable amount of energy consumption. Furthermore, low CaO dosage of 0.1% was able to give a conversion of 94.5% methyl ester and formed esteramine at 170 °C for 2 h. Therefore, the production of esterquats from esteramine may become more economically feasible through the methyl ester route by using the CaO catalyst, which can be recycled three times.     

Effects of additives on oxidation characteristics of palm oil‐based trimethylolpropane ester in hydraulics applications

Hydraulic fluids represent one of the most important groups of industrial lubricants. Increasing attention to environmental issues drives the lubricant industry to choose vegetable‐based hydraulic fluids which are biodegradable as compared to mineral‐based fluids. However, the lubricating properties of vegetable oil, such as poor oxidative stability and high pour point, have hindered their use. In this study, trimethylolpropane ester, which was derived from palm‐based methyl ester, was used as the base hydraulic fluid. The purpose of the study was to determine the optimum formulation for palm oil‐based synthetic lubricants by using suitable additives that can improve the oxidative stability and viscosity in accordance with the standard regulations for hydraulic fluid applications. The oxidative stability of the oil was evaluated by total acid number (TAN) and viscosity tests. In general, base oil without additive began to degrade after 200 h. The formulated oil, on the other hand, was quite stable even after 800 h of operation. The best formulation was obtained using 1.0% of either additive A or additive B. Both TAN and viscosity values were found to increase with increasing heating temperature. Meanwhile, the results have also shown that additive A performs better than additive B. After 800 h of exposure, the final TAN value for the formulated oil was only at 0.32 as compared to 4.88 mg KOH/g for the oil without additive. However, the kinematic viscosity of the oil at 40 and 100 °C was almost unchanged as compared to the oil without additive.     

Statistical image reconstruction for polyenergetic X-ray computed tomography

This paper describes a statistical image reconstruction method for X-ray computed tomography (CT) that is based on a physical model that accounts for the polyenergetic X-ray source spectrum and the measurement nonlinearities caused by energy-dependent attenuation. We assume that the object consists of a given number of nonoverlapping materials, such as soft tissue and bone. The attenuation coefficient of each voxel is the product of its unknown density and a known energy-dependent mass attenuation coefficient. We formulate a penalized-likelihood function for this polyenergetic model and develop an ordered-subsets iterative algorithm for estimating the unknown densities in each voxel. The algorithm monotonically decreases the cost function at each iteration when one subset is used. Applying this method to simulated X-ray CT measurements of objects containing both bone and soft tissue yields images with significantly reduced beam hardening artifacts.     

Miscibility of oligomeric poly(dimethyl siloxanes) with long-chain unbranched alkanes: 2. Unsymmetrical cloud point curves

Previously obtained cloud point curves for mixtures of oligomeric poly(dimethyl siloxanes) (weight fraction W₁) with oligomeric polyethylenes have been supplemented by the use of samples of higher molecular weight. Initial flat regions at low-medium W₁ as well as a slight shoulder at extremely high W₁ are now considered to be due to crystallization, since the temperatures at which they occur are the melting points of the oligoethylenes. The actual cloud point curves were of an unsymmetrical dome shape, the form of which could not be simulated by using a concentration-independent interaction parameter g in the Flory-Huggins equation. However, spinodals calculated by assuming a quadratic dependence of g on composition were of the same shape as the experimental cloud point curves. The critical compositions calculated on this basis were also close to the experimental ones.