Verbesserung des Vakuums in Isoliergefäßen aus Glas

Improving the vacuum would increase the insulation capacity of commercially available glass containers by a factor of about two. To do this, pressures of 10^?4 mbar must be attained. Different approaches were taken to meet this objective. As an alternative to today's commonly practiced sealing method, three possibilities are introduced which eliminate the necessity of pump stub narrowing which causes reduced conductance. Furthermore, depending on the sealing process used, the gases occuring during sealing are either avoided completly or they can at least be reduced by having the chance of exact temperature control resp. by a lower separation temperature. A completly different approach was taken by using Getters, of which a metal hydride on a TiVMn base proved especially suitable. It is activated by heat and can be integrated into the normal production process without any problem. Aside from a shorter pump period, the added advantage here is the containment of the gasses occuring during sealing as well as that of the longterm gasses.     

Estimating the load line displacement of cracked laboratory specimens using the engineering treatment model (ETM)

The Engineering Treatment Model (ETM) provides a means for estimating the load line displacement of a cracked body. Under contained yielding conditions the model uses available linear elastic solutions with an Irwin-type plasticity correction of the crack length. The magnification factor (F/F_y)^1/n describing the material's strain hardening behaviour is applied for extrapolation into the regime of net section yielding. Comparison of ETM estimates with finite element and experimental results shows that the assumptions of the model are realistic.