Modeling subthreshold SOI logic for static timing analysis

A simple, yet realistic physics-based model is introduced to describe the subthreshold drain current of a MOSFET taking into account the body- and drain-voltage dependencies, including the short channel effects. This model, verified by SPICE simulations, describes adequately the pseudotriode and pseudosaturation regions of MOS transistors operated below V/sub T/. It can be applied for predicting bulk- or partially depleted (PD) SOI CMOS circuit operation. Analytical expressions derived for the logic switching threshold and delay are applied to predict the performance of CMOS-SOI inverters.     

SHS of shape memory CuZnAl alloys

Aiming at preparation of shape memory alloys (SMAs), we explored the SHS of Cu_{1 − x} Zn_{1 − y} Al_{1 − z} alloys (0.29 < x < 0.30, 0.74 < y < 0.75, and 0.83 < z < 0.96). The most pronounced shape memory effect was exhibited by the alloys of the following compositions (wt %): (1) Cu(70.6)Zn(25.4)Al(4.0), (2) Cu(70.1)Zn(25.9)Al(4.0), and (3) Cu(69.9)Zn(26.1)Al(4.0). The effect of process parameters on the synthesis of CuZnAl alloys was studied by XRD, optical microscopy, and scanning electron microscopy (SEM). The grain size of CuZnAl was found to depend on the relative amount of the primary CuZn and AlZn phases. Changes in the transformation temperature and heat of transformation are discussed in terms of ignition intensity and compaction. Mechanism of the process depends on the level of the temperature attained relative to the melting point of components. At the melting point of AlZn, the process is controlled by the solid-state diffusion of AlZn into a product layer. The ignition temperature for this system depends on the temperature of the austenite-martensite transformation in CuZnAl alloys. The composition and structure of the products was found to markedly depend on process parameters. The SHS technique has been successfully used to prepare a variety of SMAs.      

Electrical and optical study of Cu(In, Ga)Se2 co-evaporated thin films

Co-evaporation technique from three sources was used to prepare Cu(In, Ga)Se₂ polycrystalline thin films for photovoltaic conversion. Their conductivity was studied in the range 20–300 K. The grain boundary scattering mechanism is mainly responsible for the diffusion process in the latter materials. In the low temperature region, we interpret the data in terms of Mott law and the analysis is very consistent with the variable range hopping. However, thermoionic emission is predominant at high temperatures. When the conductivity deviates from the classical grain boundary conduction models, inhomogeneity is then considered and parameters such as the standard deviation and the mean potential barrier height are derived. Transmittance measurements yielded band gap values of 1.07 and 1.64 eV for CuInSe₂ and CuGaSe₂, respectively.     

Mechanical activation-assisted electro-thermal explosion synthesis of the Ti2AlC phase

This study deals with the synthesis of the Ti₂AlC phase using the Electro-Thermal Explosion under Pressure with Confinement (ETEPC) technique. The effects of the ETEPC technique and the milling process parameters on the TiC_x phase content and the formation mechanism of the Ti₂AlC phase were investigated. The latter is mainly affected by the morphology of the powder mixture and aluminum melted amount. The optimization of the above parameters allowed the achievement of the desired reaction, leading to the formation of the Ti₂AlC phase with a purity of about 97?wt%. The results clearly demonstrate that the ETEPC process enables one to control both time and material synthesis temperature.     

Towards a dynamic modeling of the predator prey problem

This article addresses a new dynamic optimization problem (DOP) based on the Predator-Prey (PP) relationship in nature. Indeed, a PP system involves two adversary species where the predator’s objective is to hunt the prey while the prey’s objective is to escape from its predator. By analogy to dynamic optimization, a DOP can be seen as a predation between potential solution(s) in the search space, which represents the predator, and the moving optimum, as the prey. Therefore we define the dynamic predator-prey problem (DPP) whose objective is to keep track of the moving prey, so as to minimize the distance to the optimum. To solve this problem, a dynamic approach that continuously adapts to the changing environment is required. Accordingly, we propose a new evolutionary approach based on three main techniques for DOPs, namely: multi-population scheme, random immigrants, and memory of past solutions. This hybridization of methods aims at improving the evolutionary approaches ability to deal with DOPs and to restrain as much as possible their drawbacks. Our computational experiments show that the proposed approach achieves high performance for DPP and and competes with state of the art approaches.     

Route Maintenance in IEEE 802.11 wireless mesh networks

In this paper, we propose a novel Route Maintenance scheme for IEEE 802.11 wireless mesh networks. Despite lack of mobility and energy constraints, reactive routing protocols such as AODV and DSR suffer from frequent route breakages in 802.11 based infrastructure wireless mesh networks. In these networks, if any intermediate node fails to successfully transmit a packet to the next hop node after a certain number of retransmissions, the link layer reports a transmission problem to the network layer. Reactive routing protocols systematically consider this as a link breakage (and therefore a route breakage). Transmission failures can be caused by a number of factors e.g. interference or noise and can be transient in nature. Frequent route breakages result in significant performance degradation. The proposed mechanism considers multiple factors to differentiate between links with transient transmission problems from those links which have permanent transmission problems and takes a coherent decision on link breakage. The proposed mechanism is implemented in AODV for single-radio single-channel mesh network and an extension is incorporated in multi-radio multi-channel scenarios. Simulation results show substantial performance improvement compared to classical AODV and local route repair schemes.     

The induced damage in the hepatopancreas of Orchestia species after exposure to a mixture of Cu/Zn—An ultrastructural study

The hepatopancreas of crustaceans species has been recognized as an essential target organ to assess trace elements' effects. Due to its dynamic and capability of detoxifying trace metal, this organ often indicates distinct pathological disturbances. In the present work, we intend to evaluate the bioaccumulation of trace metal in three Orchestia species (Orchestia montagui, Orchestia gammarellus, and Orchestia mediterranea) living in symmetry in the banks of Bizerte lagoon (37°13′8″N 09°55′1″E) after their exposure during 14 days to a mixture of copper and zinc, and to highlight the effect of these metals on their hepatopancreas ultrastructure using transmission electron microscopy. At the end of the experiment, results showed that the mortality and the body mass varied according to the used nominal concentrations. Significant alterations were noted in all the treatment groups. The degree of these alterations depends on the used concentration, and they are represented especially by the cells remoteness and the border lyses, the reduction of the nuclear volume, the increase in the cytoplasm density with the presence of trace metal in the nucleus as well as in the vacuole, the disorganization and the destruction of microvilli, the condensation of the majority of cellular organelles and mitochondria swelling. Through this study, Orchestia genus could be an attractive candidate for the biochemical study of trace metal toxicity in Tunisian wetlands.     

Performance analysis of an opportunistic multi‐user cognitive network with multiple primary users

Consider a multi‐user underlay cognitive network where multiple cognitive users concurrently share the spectrum with a primary network with multiple users. The channel between the secondary network is assumed to have independent but not identical Nakagami‐m fading. The interference channel between the secondary users (SUs) and the primary users is assumed to have Rayleigh fading. A power allocation based on the instantaneous channel state information is derived when a peak interference power constraint is imposed on the secondary network in addition to the limited peak transmit power of each SU. The uplink scenario is considered where a single SU is selected for transmission. This opportunistic selection depends on the transmission channel power gain and the interference channel power gain as well as the power allocation policy adopted at the users. Exact closed form expressions for the moment‐generating function, outage performance, symbol error rate performance, and the ergodic capacity are derived. Numerical results corroborate the derived analytical results. The performance is also studied in the asymptotic regimes, and the generalized diversity gain of this scheduling scheme is derived. It is shown that when the interference channel is deeply faded and the peak transmit power constraint is relaxed, the scheduling scheme achieves full diversity and that increasing the number of primary users does not impact the diversity order. Copyright © 2014 John Wiley & Sons, Ltd.