A novel technique for a DC brushless motor without position sensors

A dc brushless motor is a kind of synchronous motor driven by an inverter and requires sensors to detect the rotor position. As one of the methods, the induced voltages of a brushless motor have been utilized in practice. However, there are some problems in this method, e.g., the motor can obtain insufficient torque due to the low induced voltages in a low-speed range. This paper proposes a new method which controls the inverter angular frequency ω₁ by using inherent characteristics wherein the torque current i_r is almost proportional to the internal phase angle φ where the primary flux of a synchronous motor is controlled to be constant. If the parameters of a motor are given exactly, the speed regulation is quite small and the transient characteristics with high response and high starting torque are obtained. Furthermore, it is possible to operate a synchronous motor in the field-weakening range. Here, the principle of the control method and the performance characteristics of a dc brushless motor having no position sensors are discussed. The simulation and the experimental results of the tested machine show that the proposed method is very useful for practical applications.     

Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

The synthesis of amorphous M-Si (M=transition metal) alloy powders by mechanical alloying

Crystalline powders of Si and M (transition metal) in the composition ratio Si M = 2 1 were mechanically alloyed by a laboratory ball mill in an inert atmosphere. The progress of the mechanical alloying was identified by X-ray diffraction. The amorphization reaction between Si and M proceeded according to a second-order reaction. The sequence of the rate of amorphization reaction for the Si-M system was Mn > Ti > V > Ni > Co. The sequence of the rate was correlated to the volume ratio (V _M/V_Si) of the Si-M system except for Si-Ni system. The crystallization of Si-Mn, of which the MA rate was fastest, was studied by means of X-ray diffraction, differential thermal analysis (DTA) and electrical resistivity measurement. We observed parallel changes on crystallization between the thermal event in the DTA tracing and the change of electrical resistance.     

Enzymatic Analysis of Positional Distribution of Fatty Acids in Solid Fat by 1,3-Selective Transesterification with Candida antarctica Lipase B

A protocol for the analysis of the positional distribution of fatty acids (FA) in solid triacylglycerols (TAG) was developed using sn-1(3) selective alcoholysis catalyzed by immobilized Candida antarctica lipase B (CALB). One part by weight of solid fat and ten parts by weight of ethanol (99.5 %) were warmed to liquefy the fat. After adding 0.44 parts by weight of CALB, the mixture was shaken at 50 °C for 10 min then at 30 °C for 2.8 h. The recovery of 2-MAG after the 3-h transesterification reaction was ca. 85 % of the maximum theoretical yield (33 mol%), with the loss of 15 % attributable to the acyl migration from sn-2 to sn-1(3). The recovery was similar to that of the solvent-free alcoholysis of structured lipids, 1,3-dipalmitoyl, 2-oleoyl glycerol and 1,3-dioleoyl, 2-palmitoyl glycerol, conducted at 30 °C for 3 h. In contrast, the acyl migration from sn-1(3) to sn-2 was hardly observed. Because the detected acyl migration was only in the direction of sn-2 to sn-1(3), and not vice versa, it is proposed to determine the FA composition of the sn-2 position of TAG by the gas chromatographic analysis of 2-MAG fraction recovered from the enzymatic reaction mixture, and the FA composition of sn-1(3) position by a mass balance using the FA composition of TAG and of the sn-2 position as inputs. The procedure was successfully applied to palm oil and shea butter, and docosahexaenoic acid (DHA)-rich single cell oil from Aurantiochytrium sp. KH105 for the first time.     

Size-dependent separation of graphene oxide by deformation of packed-gel in a chromatographic column

ABSTRACT

A deformable gel-packed chromatographic column was used to separate as-synthesized graphite oxide with different sizes. The synthesized gel (56 µm) was deformed by pressure of the fluid flow and the gaps in the gels showed a range of sizes. A suspension of graphene oxide (0.1 g/L, 10 mL) was injected, and graphene oxide in the elution had a size at 0.56 μm and 0.14 μm, whereas in half upper and bottom domain of the gel layer graphene oxide had a size at 33 µm and 2.9 µm, respectively, demonstrating that graphene oxide suspension was separated by size through gel layer.     

Point-spread function for a rotationally symmetric birefringent lens

Imaging properties of a birefringent lens, in which the fast (or the slow) axis is distributed in the radial direction whereas magnitude of birefringence varies as a quadratic function of the pupil radius, are investigated by calculating a point-spread function. It is found that the point image is analytically described by using the Lommel function as well as the zero-order Bessel function, and a localized intensity null surrounded by bright regions in all directions can be realized at a geometrical focus under certain conditions. The magnitude of birefringence that is tolerable in image formations is also discussed, assuming that the lens is applied to microlithography.     

A Note on Non-Closure Property of Sublogarithmic Space-Bounded 1-Inkdot Alternating Pushdown Automata with Only Existential (Universal) States

1-inkdot alternating pushdown automaton is a slightly modified alternating pushdown automaton with the additional power of marking at most 1 tape-cell on the input （with an inkdot） once. This paper investigates the closure property of sublogarithmic space-bounded 1-inkdot alternating pushdown automata with only existential （universal） states, and shows, for example, that for any function L（n） such that L（n） ≥ log logn and L（n） = o（log n）, the class of sets accepted by weakly （strongly） L（n） space-bounded 1-inkdot two-way alternating pushdown automata with only existential （universal） states is not closed under concatenation with regular sets, length-preserving homomorphism, and Kleene closure.     

Aggregate formation of rCHO cells and its maintenance in repeated batch culture in the absence of cell adhesion materials

Aggregate formation of recombinant Chinese hamster ovary (rCHO) cells capable of producing granulocyte colony-stimulating factor (G-CSF), using medium lacking cell adhesion materials in a repeated batch culture, was examined together with cell growth, cell viability and G-CSF production. The rCHO culture was conducted in a rotary shaker and the medium was changed every five days. The formation of stable cell aggregates with high reproducibility was observed after the first medium change. The size of the cell aggregates (consisting of several 10s to 40,000 cells) formed during the repeated batch culture ranged from 30 to 600 microm. The cell density of the aggregates reached as high as 2 x 10(6) cells/ml and the viability was maintained at more than 80% for 19 d. Changing the medium to avoid glucose exhaustion effectively maintained the cell density, cell viability and G-CSF productivity at high levels.     

Characterization of oxygen-dependent lysis of Escherichia coli cells infected by bacteriophage T4

Infection of Escherichia coli cells by T4 phage at a multiplicity of infection (MOI) of 0.01 caused inhibition of cell lysis for up to 4 h. Such cells grown under aerobic condition were lysed by external stimuli such as cold shock, osmotic shock or addition of toxic substances, e.g., carbonyl cyanide m-chlorophenylhydrazone (CCCP). However, the effects of these external stimuli were reduced by transferring the cells to static incubation, by which dissolved oxygen was consumed by the cells within 10 min. The cells became insensitive to such external stimuli when the culture was deoxygenated with nitrogen gas. Following infection with a lysozyme amber mutant, eL1a, the cell membrane permeability was found to be increased either by cold shock or osmotic shock treatment of cells grown under aerobic conditions, but not in cells transferred to the static incubation. Oxygen limitation was suggested to enhance membrane stability in relation to cell lysis following the cold or osmotic shock treatment.