Mobile positioning using wireless networks: possibilities and fundamental limitations based on available wireless network measurements

Positioning in wireless networks is mainly used for safety, gaming, and commercial services. It is expected to increase in popularity when emergency call services become mandatory as well as with the advent of more advanced location-based services and mobile gaming. In this article, we discuss and illustrate the possibilities and fundamental limitations associated with mobile positioning based on available wireless network measurements. The possibilities include a sensor fusion approach and model-based filtering, while the fundamental limitations provide hard bounds on the accuracy of position estimates, given the information in the measurements in the most favorable situation. The focus of this article is to illustrate the relation between performance requirements, such as those stated by the Federal Communications Commission (FCC), and the available measurements. Specific issues on accuracy limitation in each measurement, such as synchronization and multipath problems, are briefly commented upon. A geometrical example, as well as a realistic example adopted from a cell planning tool, are used for illustration.     

DECOUPLER DESIGN AND CONTROL SYSTEM TUNING BY INA FOR DISTILLATION COMPOSITION CONTROL†

Six distillation column models have been used in studies of the usefulness of the Inverse Nyquist Array (INA) method for design of dual composition control for distillation. Five of the column models are experimental, one describing an industrial column, the others four pilot plants. One column model is obtained by modeling from first principles.

The control strategies investigated and compared are multiloop SISO, 2-way decoupling and l-way decoupling. The control variables are the standard ones, i.e. reflux flow and boilup.

In most of the cases INA has been found to be a useful tool for design of the loops and for comparison of the different control approaches. INA has also been found to be useful for simultaneous tuning of the decouplers and the feedback controllers.

For 2-way decoupling the criterion to minimize interaction at the critical frequency for each primary feedback loop has been found useful in most, but not all, cases. The scheme can be designed by pure gains in the decouplers and there is no reason to introduce dynamics into the decouplers—the systems studied are already sufficiently rich in dynamics.

INA has been found to be a suitable vehicle for the choice between the two possible l-way decoupling schemes.

With the design approach taken, l-way decoupling has been found to provide considerably better control quality than 2-way decoupling in two of the six systems, the differences in control quality being small in the other cases.

The effect of model mismatching on the results, caused e.g. by process nonlinearities, is discussed and simple rules to decrease the parameter sensitivity for 2-way decoupling schemes are given. When model mismatching is considered, the advantage of l-way decoupling over 2-way decoupling seems to increase.

One deficiency of the INA design as used in this paper is that it does not single out the design which is to be preferred on the grounds of robustness.     

High Order Finite Difference Approximations of Electromagnetic Wave Propagation Close to Material Discontinuities

Electromagnetic wave propagation close to a material discontinuity is simulated by using summation by part operators of second, fourth and sixth order accuracy. The interface conditions at the discontinuity are imposed by the simultaneous approximation term procedure. Stability is shown and the order of accuracy is verified numerically.     

Sufficient output conditions for identifiability in blindequalization

The problem of input identifiability in blind deconvolution is considered where the input belongs to a known discrete alphabet. Input identifiability is an algorithm independent property, which does not necessarily imply channel identifiability. Sufficient conditions for input identifiability are derived in terms of algebraic relations on the observed output. It is shown how these new results relate to and unify other known sufficient conditions     

The effect of random grain distributions on fatigue crack initiation in a notched coarse grained superalloy specimen

Coarse grained superalloys are of large interest in high temperature applications, and can be found in e.g. gas turbine components, where great care must be given with respect to high temperature fatigue. Due to the large grain size, the material behaviour at e.g. sharp notches cannot be considered homogeneous. As a consequence, the fatigue behaviour is likely to expose a large variation. In order to numerically investigate this variation, a Monte Carlo analysis has been carried out by 100 FE-simulations of notched specimens, where placements and orientations of the grains were randomised. Furthermore, each grain was modelled as a unique single-crystal, displaying both anisotropic elastic and plastic behaviour and tension/compression asymmetry. The effect of randomness was investigated by the obtained dispersion in fatigue crack initiation life. It was concluded that the fatigue life behaviour of coarse grained nickel-base superalloys may show a considerable variation, which cannot be captured by one single deterministic analysis based on data for a homogenised material. Furthermore, the dispersion is of such a magnitude that it needs to be taken into account in industrial applications where highly stressed coarse grained materials are used.     

A naturalistic study of commuter cyclists in the greater Stockholm area

Few naturalistic studies have been carried out with commuter cyclists to discover the types of problems they encounter on a daily basis. The study presented here has been commissioned by the City of Stockholm municipality and focuses specifically on commuter cyclists in the Greater Stockholm area. The aim of the study was to describe and pinpoint accessibility and safety problems, but also to generate an accessible geographical interface that could serve as a traffic planning tool for cycle network improvement. Statistical surveys in the Stockholm area have shown a rapid growth in the number of cyclists as well as an increase in problems associated with an overburdened cycle infrastructure. Given the heightened emphasis on transport system sustainability, the City of Stockholm is faced with the challenging task of trying to maintain and encourage the upward trend in commuter cycling through a process that involves problem identification, classification, prioritisation and resolution. An innovative methodology involving the use of GPS logging devices and small video cameras was developed and supported with analysis software designed specifically for the purposes of this study. Experienced commuter cyclists were recruited to cycle 17 different major cycle routes to and from the suburbs and inner city area during morning and afternoon peak traffic hours during the main cycle season. Over 500 safety and accessibility/mobility problems were identified and recorded from the data collected from 16 commuter cyclists. The method and representation of data proved successful for strategic traffic planning work at City of Stockholm and has since provided invaluable input for and the development of a new cycle plan for Greater Stockholm. Indirectly, the results of this work have also contributed to longer term safety and environmental targets.     

Interferometer-based structured-illumination microscopy utilizing complementary phase relationship through constructive and destructive image detection by two cameras

In an interferometer-based fluorescence microscope, a beam splitter is often used to combine two emission wavefronts interferometrically. There are two perpendicular paths along which the interference fringes can propagate and normally only one is used for imaging. However, the other path also contains useful information. Here we introduced a second camera to our interferometer-based three-dimensional structured-illumination microscope (I(5)S) to capture the fringes along the normally unused path, which are out of phase by π relative to the fringes along the other path. Based on this complementary phase relationship and the well-defined phase interrelationships among the I(5)S data components, we can deduce and then computationally eliminate the path length errors within the interferometer loop using the simultaneously recorded fringes along the two imaging paths. This self-correction capability can greatly relax the requirement for eliminating the path length differences before and maintaining that status during each imaging session, which are practically challenging tasks. Experimental data is shown to support the theory.