Analysis of frictional energy dissipation on an annular surface with harmonic loading

Metallic mating surfaces in structural joints offer a good source of frictional energy dissipation resulting in a damped dynamic structural response. This paper reports the results of experiments where the energy dissipation per cycle occurring at a preloaded flat metallic annular interface subjected to cyclic tangential forces is measured. The effects of certain pertinent joint variables on this frictional energy dissipation are investigated by the application of Response Surface Methodology. A central composite rotatable design was utilized for developing empirical expressions for energy loss. The methodology presented suggests a useful technique for tribological research.     

A comparative investigation of interfacial adhesion behaviour of polyamide based self-reinforced polymer composites by single fibre and multiple fibre pull-out tests

Abstract

Interfacial adhesion of composite materials plays an important role in their mechanical properties and performance. In the present investigation, analysis of the interfacial properties of self-reinforced polyamide composites by using microbond multiple fibre pull-out test is emphasised. Microbond specimens prepared through thermal processing are tested for their interfacial properties by multiple fibre bundle pull-out tests and compared with that of traditional single fibre pull-out test specimens. Multiple fibre pull-out addresses the volume fraction as well as eliminates the possibility of fibre breakage before matrix shear. Higher scatter in the data in the samples is addressed in the present studies. FTIR and Fractographic studies are carried out for deep understanding of the post pull-out interfacial adhesion.     

Comparison of TiAIN,AICrN, and AICrN/TiAIN coatings for cutting-tool applications

Monolayer and bilayer coatings of TiAlN, AlCrN, and AlCrN/TiAlN were deposited onto tungsten carbide inserts using the plasma enhanced physical vapor deposition process. The microstructures of the coatings were characterized using scanning electron microscopy （SEM） and atomic force microscopy （AFM）. The SEM micrographs revealed that the AlrN and AlCrN/TiAlN coatings were uniform and highly dense and contained only a limited number of microvoids. The TiAIN coating was non-uniform and highly porous and contained more micro droplets. The hardness and scratch resistance of the specimens were measured using a nanoindentation tester and scratch tester, respectively. Different phases formed in the coatings were analyzed by X-ray diffraction （XRD）. The AlCrN/TiAlN coating exhibited a higher hardness （32.75 GPa）, a higher Young＇s modulus （561.97 GPa）, and superior scratch resistance （LcN = 46 N） compared to conventional coatings such as TiAlN, A1CrN, and TiN.     

Framework flexibility of sodium zirconium phosphate: role of disorder, and polyhedral distortions from Monte Carlo investigation

A detailed Monte Carlo investigation of the structural changes of the framework of sodium zirconium phosphate, [Zr₂P₃O₁₂]⁻,—NASICON (acronym for Na-SuperIonic CONductor)—accommodating alkali ions of varying sizes (Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺) is carried out over a range of temperatures. Simulation results are critically compared with the structural models proposed earlier and available experimental results. Anisotropic changes of the rhombohedral cell parameters—a contracts while c expands with the size of the alkali ion substituted—is observed in good agreement with previous experimental results. The mechanism of anisotropic variation of lattice parameters involves dominantly, coupled rotations of the polyhedra as proposed by Alamo and co-workers. It is, however, observed that the distortions of the PO₄ tetrahedra and ZrO₆ octahedra are significant, and accounts for nearly one-third of the total change in a and c—parameters as the size of the alkali ion increases. This suggests that ‘rigid’ polyhedral models, permitting only angular distortions of the polyhedra, are of limited quantitative applicability in these solids. The same mechanism is found to be responsible for the low/anisotropic thermal expansion of these solids. Evidence that the polyhedral rotations are dynamic, opposed to a static-frozen-in disorder, is provided.     

Phenolic‐epoxy matrix curable by click chemistry—synthesis,curing, and syntactic foam composite properties

Alkyne functional phenolic resin was cured by azide functional epoxy resins making use of alkyne‐azide click reaction. For this, propargylated novolac (PN) was reacted with bisphenol A bisazide (BABA) and azido hydroxy propyloxy novolac (AHPN) leading to triazole‐linked phenolic‐epoxy networks. The click cure reaction was initiated at 40–65°C in presence of Cu₂I₂. Glass transition temperature (Tg) of the cured networks varied from 70°C to 75°C in the case of BABA‐PN and 75°C to 80°C in the case of AHPN‐PN. DSC and rheological studies revealed a single stage curing pattern for both the systems. The cured BABA‐PN and AHPN‐PN blends showed mass loss above 300°C because of decomposition of the triazole rings and the novolac backbone. Silica fiber‐reinforced syntactic foam composites derived from these resins possessed comparable mechanical properties and superior impact resistance vis‐a‐vis their phenolic resin analogues. The mechanical properties could be tuned by regulating the reactant stoichiometry. These low temperature addition curable resins are suited for light weight polymer composite for related applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41254.     

Influence of cerium oxide additive and aloe vera biodiesel on a CI engine

Diesel is the main source of world transportation due to higher combustion efficiency, compliance, consistency and cost-economy. It is also a major contributor to the world prosperity since it is used extensively. Diesel engine’s emissions are the serious hazard to the world environment and it is measured to be the major causes of air pollution. The demand in biofuels for years created a scope for aloe vera into biodiesels. Aloe vera, having higher calorific value vnthan other plant sources used as biodiesels, enhanced us in making another alternative biodiesel, which has lesser emissions and better performance. In this research work, four biodiesel blends from aloe vera oil with cerium oxide additive are explored for their performance and emission characteristics. The results proved B30 (30% biodiesel, 68% diesel and 1% cerium oxide) gives good performance when compared to other blends.     

Numerical and Experimental Studies of Parasitic Heat Losses in Coldfinger of a Pulse Tube Cryocooler in Off-State Condition

A pulse tube cryocooler (PTC) for future metrological satellites has been developed at one of the lead centers of the Indian Space Research Organisation in Bangalore, India for cooling on-board Infrared (IR) detectors to 80 K.A study has been conducted on the coldfinger of PTC to understand the off-state heat loads on the cooler by varying the value of gravity numerically in ANSYS FLUENT and experimentally by orienting the setup with respect to gravity. The off-state parasitic losses represent a major heat load in on-board applications that include redundant, viz. nonoperating coolers. To find out the amount of off-state parasitic heat losses in a nonoperating coldfinger of the PTC experimentally, transient warm-up technique was used. Various heat loads were applied experimentally on the cryo-tip at temperatures ranging from 80 to 100 K for determining the parasitic losses. The effect of orientation of PTC on the off-state parasitic heat load with respect to gravity is studied and presented in this paper. Enhancement due to free convection heat flow normalized by gas molecular conduction in pulse tube is analyzed using computational fluid dynamics to verify and compare with experimental results. The best orientation angle where the parasitic is low is when the cold end of the coldfinger of pulse tube cryocooler faces down (0^°) and high when the cold end of the coldfinger is oriented to 135^°.     

Experimental study on conventional solar still integrated with inclined solar still under different water depth

This study primarily focuses on comparative experimental analysis on standalone conventional solar still (CSS), inclined solar still (ISS), and integrated conventional and inclined solar still (CSS‐ISS) for different parameters that affect the freshwater yield. For enhancing the freshwater yield only a few studies are available on still‐still integration. The present novel study provides a greater improvement in improving the freshwater yield by integrating ISS with CSS. This experimental work mainly concentrates on the importance of water depth (d _w) and mass flow rate of water ( m _w) in the solar still. Water depth inside the conventional still varied from 0.02 to 0.06 m whereas, water is constantly flown with a mass flow rate of 8.33 kg/hour in an ISS with baffles. The experimental result shows that the accumulated freshwater yield from CSS‐ISS, ISS, and CSS were 6.2, 5.04, and 4.24 kg, respectively. CSS‐ISS and ISS produced 46.23% and 18.87% higher productivity than the CSS. From the experimental investigation, it is also identified that the water temperature is significantly improved by 20% using integration as compared with CSS without integration under the same water depth of d _w = 0.02 m. The overall improvement in yield was higher in the case of CSS‐ISS. The deviations between experimental and theoretical values of yield from the conventional and modified solar still were in the range of ±7%.     

Robustness of group delay representations for noisy speech signals

This paper demonstrates the robustness of group delay based features to additive noise. First, we analytically show the robustness of group delay based representations. The analysis makes use of the fact that, for minimum-phase signals, the group delay function can be represented in terms of the cepstral coefficients of the log-magnitude spectrum. Such a representation results in the speech spectrum dominating over the noise spectrum, both at low and high SNRs. Further, we experimentally demonstrate the robustness of the representation on a voice activity detection (VAD) task, comparing a group delay based VAD algorithm with standard VAD methods as well as a magnitude-spectrum based method.