Model Validation for Bridge-Road-Vehicle Dynamic Interaction System

The dynamic response of highway bridges subjected to moving truckloads has been observed to be dependent on (1) dynamic characteristics of the bridge; (2) truck configuration, speed, and lane position on the bridge; and (3) road surface roughness profile of the bridge and its approach. Historically, truckloads were measured to determine the load spectra for girder bridges. However, truckload measurements are either made for a short period of time [for example, weigh-in-motion (WIM) data] or are statistically biased (for example, weigh stations) and cost prohibitive. The objective of this paper is to present results of a 3D computer-based model for the simulation of multiple trucks on girder bridges. The model is based on the grillage approach and is applied to four steel girder bridges tested under normal truck traffic. Actual truckload data collected using a discrete bridge WIM system are used in the model. The data include axle loads, truck gross weight, axle configuration, and statistical data on multiple presence (side by side or following). The results are presented as a function of the static and dynamic stresses in each girder and compared with code provisions for dynamic load factor. The study provides an alternate method for the development of live-load models for bridge design and evaluation.     

Energy Metabolites as Biomarkers in Ischemic and Dilated Cardiomyopathy

With more than 25 million people affected, heart failure (HF) is a global threat. As energy production pathways are known to play a pivotal role in HF, we sought here to identify key metabolic changes in ischemic- and non-ischemic HF by using a multi-OMICS approach. Serum metabolites and mRNAseq and epigenetic DNA methylation profiles were analyzed from blood and left ventricular heart biopsy specimens of the same individuals. In total we collected serum from n = 82 patients with Dilated Cardiomyopathy (DCM) and n = 51 controls in the screening stage. We identified several metabolites involved in glycolysis and citric acid cycle to be elevated up to 5.7-fold in DCM (p = 1.7 × 10⁻⁶). Interestingly, cardiac mRNA and epigenetic changes of genes encoding rate-limiting enzymes of these pathways could also be found and validated in our second stage of metabolite assessment in n = 52 DCM, n = 39 ischemic HF and n = 57 controls. In conclusion, we identified a new set of metabolomic biomarkers for HF. We were able to identify underlying biological cascades that potentially represent suitable intervention targets.     

Unusual swelling behavior of polymer-clay nanocomposite hydrogels

The swelling behavior and the elastic properties of nanocomposite hydrogels have been investigated. The hydrogels were prepared by free-radical polymerization of the monomers acrylamide (AAm), N,N-dimethylacrylamide (DMA), and N-isopropylacrylamide (NIPA) in aqueous clay suspensions at 21 °C. Laponite with a radius of gyration in distilled water of 20 nm was used as clay particles in the hydrogel preparation. The reactions with AAm monomer were carried out in the presence of the chemical crosslinker N,N′-methylenebis(acrylamide) (BAAm). It was found that the volume of nanocomposite hydrogels immersed in water rapidly increases and attains a maximum value after about one day. Surprisingly, further increase in the swelling time results in the deswelling of the gels until they reach a limiting swelling ratio after about 5 days. This unusual swelling behavior is observable only when the clay concentration in the hydrogel is above the overlap threshold c^∗. Swelling measurements combined with the elasticity tests show that the effective crosslink density first decreases, but then increases with increasing time of swelling of the hydrogels. The results were explained in terms of the rearrangements of the highly entangled polymer chains and clay particles during the gel volume change.     

Fractionation of transgenic corn for recovery of recombinant enzymes

Two germ-separation methods, dry-milling and density separation by flotation, were evaluated for recovering recombinant β-glucuronidase (rGUS) that accumulated primarily in the germ of transgenic corn. The dry-milling process consisted of (i) seed tempering, (ii) degerming with a horizontal-drum degermer/dehuller, (iii) particle size fractionation with standard sieves, (iv) germ and endosperm separation by roller milling and sifting, and (v) removal of hulls by aspiration. Sieves nos. 5, 6, and 7 retained the majority of germ, and subfractions from these sieves were pooled as a germ-rich fraction. Mass balances showed that the germ-rich fraction, which constituted 17% of the total dry-milled corn weight, contained 49% of rGUS activity and 64% of the total recoverable oil. Germ fractionation by flotation was tested as a proof-of-concept method aimed at separating corn fractions based on their difference in specific gravity (sp gr). The process consisted of impact-grinding of corn kernels followed by density separation using 1.15 or 1.3 specific gravity sodium nitrate solution. The oil-containing germ fraction floated, whereas the heavier endosperm fraction sedimented. The flotation method was simpler and resulted in higher enzyme recovery, that is, the germ-rich fraction was 20% (w/w) of the initial corn weight, and accounted for 80% of rGUS activity and 77% of total oil. The sodium nitrate solution did not have an adverse effect on the enzyme activity.     

Analysis of defects on BN nano-structures using high-resolution electron microscopy and density-functional calculations

Cubic boron nitride (c-BN) nucleation takes place on hexagonal boron nitride (h-BN) layers growing perpendicular to the substrate surface during thin film synthesis. Studies focused on the nucleation of the cubic phase suggest the possibility that transient phases and/or defects on these h-BN structures have a role in sp3-bonded cubic phase nucleation. In this study, we have investigated the nature, energetics, and structure of several possible defects on BN basal planes, including point defects, 4-, and 5-fold BN rings, that may possibly match the experimentally observed transient phase fine structure. TEM image observations are used to build approximate atomic models for the proposed structures, and DFT calculations are used to relax these structures while minimizing their respective total energies. These optimized atomic geometries are then used to simulate TEM images, which are compared to the experimentally observed structures. Data from DFT calculations and analysis of simulated images from the proposed atomic structures suggest that 4-fold BN rings are more likely to exist on the transient phase possibly leading to c-BN nucleation.     

Noise analysis of robot manipulator using neural networks

Due to a lot of robot manipulators application in industry, low noise degree is very important criteria for robot manipulator's joints. In this paper, joint noise problem of a robot manipulator with five joints is investigated both theoretically and experimentally. The investigation is consisted of two steps. First step is to analyze the noise of joints using a hardware and software. The hardware is a part of noise sensors. The second step; according to experimental results, some neural networks are employed for finding robust neural noise analyzer. Five types of neural networks are used to compare each other. From the results, it is noted that the proposed RBFNN gives the best results for analyzing joint noise of the robot manipulator.     

Approximate periodic solutions for the Helmholtz-Duffing equation

Approximate periodic solutions for the Helmholtz-Duffing oscillator are obtained in this paper. He’s Energy Balance Method (HEBM) and He’s Frequency Amplitude Formulation (HFAF) are adopted as the solution methods. Oscillation natural frequencies are analytically analyzed. Error analysis is carried out and accuracy of the solution methods is evaluated.     

Dielectric properties of sol-gel derived Ta2O5 thin films

The dielectric constant and the dielectric loss of tantalum pentoxide (Ta₂O₅) thin films, produced by sol-gel spin-coated process on Corning glass substrates, have been investigated in the frequency range of 20-10⁵ Hz and the temperature range of 183-403 K, using ohmic Al electrodes. The frequency and temperature dependence of relaxation time has also been determined. The capacitance and loss factor were found to decrease with increasing frequency and increase with increasing temperature. The activation energy values were evaluated and a good agreement between the activation energy values obtained from capacitance and dielectric loss factor measurements were observed.     

Investigation of Al-O-Al sites in an Na-aluminosilicate glass

This paper reports the presence of Al- O- Al linkages in an aluminosilicate glass where Si/Al = 1 by using 2D¹⁷O triple quantum MAS NMR technique (3Q MASNMR). The experiments were performed at external magnetic fields of 8.4 and 14.4T. Despite¹⁷OMAS NMR spectra of the sample in both fields do not give much information about the different kinds of linkages in the sample, 3Q MAS NMR spectrum shows clear evidence that there are some amounts of Al-O-Al linkages in the sample giving two completely resolved peaks. These two peaks were attributed to the Si-O-Al and Al-O-Al linkages on the basis of their chemical shifts and, quadrupolar coupling constants which are quite sensitive to the local structure.     

Effects of annealing on the structural and magnetic properties of flame spray pyrolyzed MnFe2O4 nanoparticles

In this study, manganese ferrite (MnFe₂O₄) nanoparticles were produced through flame spray pyrolysis (FSP). To investigate the effects of heat treatment, the nanoparticles were annealed between 400 and 650°C for 4 h in air in a comparative manner. The structural, chemical, morphological, and magnetic properties of the nanoparticles were evaluated using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), dynamic light scattering (DLS), and vibrating sample magnetometry (VSM), respectively. The XRD results showed that the nanoparticles synthesized by the FSP method exhibited the MnFe₂O₄ spinel ferrite structure. The annealing process led to the decomposition of MnFe₂O₄ into various phases. According to the morphological analysis, the as-synthesized particles were hemispherical–cubic in shape and had an average particle size of less than 100 nm. In addition, the chemical bond structures of the nanoparticles were confirmed in detail by XPS elemental analysis. The highest saturation magnetization was recorded as 33.50 emu/g for the as-produced nanoparticles. The saturation magnetization of the nanoparticles decreased with increasing annealing temperature, while coercivity increased.