Mechanism of thermochemical growth of iron borides on iron

The mechanism of thermochemical growth of iron borides on iron was studied by analysing the products which form on samples placed in contact with B₄C-base powder mixtures with different boronising potential. The analyses were carried out by means of metallographic and X-ray diffraction techniques. Three subsequent stages of growth were observed which explain the occurrence of typical properties of the thermochemically grown boride coatings, such as preferred crystallographic orientations and textures, as well as mechanical compactness and hardness, which play a determining role in the tribological behaviour of borided components.     

The combined use of ultrasound and densitometry in the prediction of vertebral fracture

Measurement of ultrasonographic parameters provides information concerning not only bone density but also bone architecture. We investigated the usefulness of ultrasonographic parameters and bone mineral density for evaluating the probability of vertebral fracture. 397 postmenopausal women (59.1 +/- 6.0 years) with (n = 178) or without (n = 219) atraumatic vertebral fractures were studied. In all women, bone mineral density (BMD) of the lumbar spine was evaluated by dual X-ray absorptiometry (DXA) and speed of sound (SOS); broadband ultrasound attenuation (BUA) and Stiffness in the calcaneus were evaluated by an Achilles unit (Lunar Corporation). Ultrasonographic parameters and BMD were compared by examining the magnitude of the odds ratios, to determine which produces the highest estimate of the probability of odds of fracture, and by examining widths of the respective confidence intervals (CI) to show which estimate of odd ratio is the most precise. The relative risk of vertebral fracture, after adjusting for potential confounders, was 3.5 (CI 2.6-4.8) for BUA; 4.5 (CI 3.2-6.2) for SOS; 5.8 (CI 4.0-8.4) for Stiffness and 7.5 (CI 4.8-11.5) for BMD. Ultrasound (US) parameters were still significant independent predictors of vertebral fracture, even after adjusting for BMD. The relative risk of fracture for a simultaneous decrease by 1 SD of BMD and by 1 SD of each ultrasound parameter was 17.3 (CI 9.4-39.6) for BMD and SOS; 18.3 (CI 8.4-30.6) for BMD and BUA and 22.1 (CI 8.9-52.7) for BMD and Stiffness. Our data suggest that US and BMD provide complementary information which can be combined to improve estimates of vertebral fracture risk.     

Savoring Versus Dampening: Self-Esteem Differences in Regulating Positive Affect.

Five studies examined the hypotheses that when people experience positive affect, those low in self-esteem are especially likely to dampen that affect, whereas those high in self-esteem are especially likely to savor it. Undergraduate participants' memories for a positive event (Study 1) and their reported reactions to a success (Study 2) supported the dampening prediction. Results also suggest that dampening was associated with worse mood the day after a success (Study 2), that positive and negative affect regulation are distinct, that self-esteem is associated with affect regulation even when Neuroticism and Extraversion are controlled (Studies 3 and 4), and that self-esteem may be especially important for certain types of positive events and positive affect regulation (Study 5). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Analysis of Optimum Frame Synchronization Based on Periodically Embedded Sync Words

We present new tight bounds for evaluating the performance of sync word-based frame synchronization algorithms in the periodically embedded case. We consider antipodal signaling with coherent detection over additive white Gaussian noise and both optimal and suboptimal search techniques. Our bounds are very close to results obtained through simulation and tend asymptotically (for increasing signal-to-noise ratios) to the exact performance.     

Electrochemical behaviour of Invar in phosphate solutions at pH=6.0

Electrochemical studies were carried out with disk electrodes of Invar (Fe-36%Ni) in phosphate solution at pH 6.0, using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques, comparing the results with those for low carbon steel and pure Ni. Invar shows a reduced corrosion when compared to carbon steel in the weakly inhibitive solution though inferior to pure Ni. Phosphate anion is responsible for the formation of a protecting and stable film on the alloy surface at pH 6.0.Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with Invar disk electrodes (Fe-36%Ni) in phosphate solutions at pH=6.0 were carried out. Results were compared with those of carbon steel and pure Ni.     

<Emphasis Type="Italic">In situ</Emphasis> monitoring of solid fat content by means of pulsed nuclear magnetic resonance spectrometry and ultrasonics

An ultrasonic technique was developed to study the crystallization process of edible fats on-line. A chirp wave was used instead of the conventional pulser signal, thus achieving a higher signal-to-noise ratio. This enabled measurements to be made in concentrated systems [≈20% solid fat content (SFC)] through a 8.11-cm thick sample without significant signal loss. Fat samples were crystallized at 20, 25, and 30°C at a constant agitation rate of 400 rpm for 90 min. The crystallization process was followed by ultrasonic spectroscopy and a low-resolution pulsed nuclear magnetic resonance spectrometer. Specific relationships were found between ultrasonic parameters [integrated response, time of flight (TF), and full width half maximum] and SFC. TF, which is an indirect measurement of the ultrasonic velocity (v), was highly correlated to SFC (r ²>0.9) in a linear fashion (v=2.601 SFC+1433.0).     

Progressive Transmission of Vector Map Data over the World Wide Web

Within distributed computing environments, access to very large geospatial datasets often suffers from slow or unreliable network connections. To allow users to start working with a partially delivered dataset, progressive transmission methods are a viable solution. While incremental and progressive methods have been applied successfully to the transmission of raster images over the World Wide Web, and, in the form of prototypes, of triangular meshes, the transmission of vector map datasets has lacked a similar attention. This paper introduces a solution to the progressive transmission of vector map data that allows users to apply analytical GIS methods to partially transmitted data sets. The architecture follows a client-server model with multiple map representations at the server side, and a thin client that compiles transmitted increments into a topologically consistent format. This paper describes the concepts, develops an architecture, and discusses implementation concerns.