Crystallization of amorphous Ni60 Nb40−x Cr x alloys

Crystallization behaviour of amorphous Ni₆₀ Nb_40-x Cr _x (x = 0, 5, 10 and 13 at%) alloys was studied by differential Scanning calorimetry and X-ray diffraction measurements. It is shown that the addition of chromium reduces the crystallization temperature, stages of crystallization and activation energies associated with the crystallization sages of the Ni₆₀Nb₄₀ glass. Crystallization of the Ni₆₀Nb₄₀ glass occurred in three stages; in the initial stage a metastable M-phase formed in the amorphous matrix as reported earlier [1] . However, contrary to earlier observation [1], M -phase was not very stable and transformed together with some amorphous phase to the equilibrium Ni₃Nb phase in the second stage of crystallization. In the third stage, the remaining amorphous matrix transformed to the equilibrium NiNb phase. On addition of chromium the formation/stability of the M-phase was found to be suppressed and equilibrium NbCr₂ phase precipitated preferentially in the first stage. The second stage, corresponding to the formation of Ni₃Nb phase, remained almost unaltered. The third stage corresponding to the crystallization of NiNb phase disappeared completely at 13 at% Cr. In the fully crystallized samples the proportion of the NiNb phase decreased and that of NbCr₂ phase increased continuously with chromium concentration.     

The coating of cadmium compounds with copper compounds

Fine particles of cadmium carbonate (CdCO₃) were prepared by heating aqueous solutions containing dissolved urea and cadmium sulfate at 85°C for 1 h. Effect of the composition of the reactant mixture on the morphology of the precipitated particles was investigated. It was found that the cadmium sulfate content of the reactant mixture significantly affected the shape and size of the precipitated particles. At certain range of reactant mixture composition, cauliflower-shaped uniform particles were obtained. The later particles were coated with basic copper carbonate (Cu₂(OH)₂CO₃) by heating aqueous dispersions, containing CdCO₃ particles, copper (II) nitrate, and urea at 85°C for various periods of time with constant stirring. The coating process was found sensitive to the experimental conditions and in most of the trials; mixtures of the coated and coating precursor particles were obtained. As such, extensive optimizations were carried out and conditions were established for the production of uniformly coated particles.On calcination at 700°C for 1 h, the CdCO₃ particles converted into CdO, whereas the coated particles (CdCO_{3 (core)}/Cu₂(OH)₂CO_{3 (coating)} transformed into CdO_(core)/CuO_(coating)) without sintering. In the coated particles, the core and coating materials stayed mutually inert during the calcination reaction and independently converted into their respective oxides.All the calcined and uncalcined products were characterized by various physical and chemical methods.     

Lyapunov‐stable discrete‐time model reference adaptive control

Discrete‐time model reference adaptive control (MRAC) is considered with both least squares and projection algorithm parameter identification. For both cases complete Lyapunov proofs are given for stability and convergence. The results extend the approach of Johansson (Int. J. Control 1989; 50 (3):859–869) to include Lyapunov stability for MRAC when the normalized projection algorithm is used for parameter identification. Copyright © 2005 John Wiley & Sons, Ltd.     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Kinetics of oxygen absorption in aqueous sodium dithionite solutions

The absorption and reaction of oxygen in aqueous alkaline solutions of sodium dithionite has been experimentally investigated in a novel gas-liquid contactor. The novel gas-lift bubble column contactor was used to study the kinetics over wide ranges of reactant concentrations, temperature, and pH. The oxygen-sodium dithionite reaction was found to be first-order with respect to dithionite in the range of dithionite concentration < 0.1 M, and second-order in the range of dithionite concentration > 0.1 M. The reaction with respect to oxygen was found to be zero-order for all dithionite concentrations. These results and experimental investigations of the effect of solution alkalinity and temperature on the reaction rate are consistent with previous findings obtained in different gas-liquid contactors. The results thus confirm the feasibility of using the gas-lift bubble column for the kinetics of gas-liquid reactions.     

Development of Si3Na/Al composite by pressureless melt infiltration

Pressureless infiltration process to synthesize Si3N4/Al composite was investigated. Al-2%Mg alloy was infiltrated into Si3N4 and Si3N4 containing 10% Al2O3 preforms in the atmosphere of nitrogen. It is possible to infiltrate Al-2%Mg alloy in Si3N4 and Si3N4 containing 10% Al2O3 preforms. The growth of the dense composite of useful thickness was facilitated by the presence of magnesium powder at the interface and by flowing nitrogen. During infiltration Si3N4 reacted with aluminium to form Si and AIN, the growth of composite was found to proceed in two ways, depending on the Al2O3 content in the initial preform. Firstly, preform without Al2O3 content gives rise to AIN, Al3.27Si0.47 and Al type phases after infiltration. Secondly, perform with 10% Al2O3 content gives rise to AIN-Al2O3 solid solution phase （AION）, MgAl2O4, Al and Si type phases. AlON phase was only present in composite, containing 10% Al2O3 in the Si3N4 preforms before infiltration.     

Behavior of residual carbon in Sm(Co, Fe, Cu, Zr)z permanent magnets

When sintered Sm(Co, Fe, Cu, Zr)_z permanent magnets are prepared by metal injection molding, some organic binders are added in alloy powder, which leads to much residual carbon in the magnets. The residual carbon decreases magnetic properties and destroys the microstructure of the magnets. In this paper, the behavior of carbon in Sm(Co, Fe, Cu, Zr)_z permanent magnets has been studied. The results indicate that Sm(Co, Fe, Cu, Zr)_z magnets can keep excellent magnetic properties when the carbon content is below 0.1 wt.%: Br ≥ 10 kGs, H_cj ≥ 22 kOe, BH_max ≥ 25 MGOe. When the carbon content is above 0.1 wt.%, Br, H_cj and BH_max decrease with increasing carbon content evidently. Carbon consumes Zr content and forms ZrC, which reduces the volume fraction of the lamella and Sm(Co, Cu)₅ phases. Thus, the cell size increases and the cellular microstructure deteriorates. When the carbon content reaches 0.43 wt.%, there is not enough Sm(Co, Cu)₅ phase to form a uniform cellular microstructure. Br, H_cj and BH_max are approximate to zero. Since carbon has little influence on the content of Sm₂(Co, Fe)₁₇ phase, Ms can keep a high value (≥100 emu/g). ZrC has high melting point (3420 °C) and acts as dispersion particle in the magnets, which prevents the grains of SEM structure growing and reduces the liquid content of green compacts during sintering. Therefore, the density of the magnets decreases.     

Three Dimensional Conceptualisation of Hydrogeological Environment to Underpin Groundwater Management in Irrigation Area

Australian irrigated agriculture utilises about 70?% of all water used in the country, 21?% of which is derived from groundwater. Sustainability for irrigated agriculture also depends on keeping the watertables at a safe level below the rootzone to avoid salinisation and reduction in crop yields. There is a vital need to understand groundwater and aquifer systems and their roles in the sustainability of irrigated agriculture in order to manage groundwater properly. This study builds on the previous hydrogeological and groundwater investigations of the Coleambally Irrigation Area (CIA) in New South Wales of Australia. It presents a new approach which systematically characterises regional hydrogeological environment using a three-dimensional (3-D) conceptual framework developed in ArcGIS. The 3-D hydrological conceptualisation of the CIA has integrated disparate sources of data into a coherent knowledge base for a better visualisation of hydrogeological characteristics and a comprehensive analysis of groundwater flow and aquifers. As an application example, the model was used to develop cross-sectional models of the area and to estimate regional-scale net recharge. The results have provided a basis for the numerical modelling and added values to procedures which underpin irrigation system management investment decisions through improving the understanding of hydrogeology underlying the area and creating an action-oriented dialogue among stakeholders.     

Micromorphology,pharmacognosy, and bio‐elemental analysis of an important medicinal herb: Verbascum thapsus L.

The present study was conducted on characterization of morpho‐anatomical, phytochemical, and bio‐elemental analysis of root, stem, and leaf of Verbascum thapsus. Morphologically Verbascum is a biennial plant that flowers for a month and a half in mid‐ to late summer. Various organoleptic features of root, leaf, and stem were recorded. Anatomically the T. S of the root, stem, and leaf showed a typical dicot histological differentiation. Leaf possessed anomocytic stomata, crescent shape vascular bundles, and covered with long and stellate type trichomes while, stem contained collateral type of vascular bundles and a well‐developed pith to store phytochemicals responsible for various pharmacological activities. The powder drug study through scanning electron microscopy revealed the presence of various types of tissues. Branched, tree like and stellate trichomes in root and leaf help in absorption and reduce loss of water. These anatomical features are responsible for the survival of the plant as biennial. Four macro elements (Na, K, Ca, and Mg) and seven microelements (Cr, Cu, Fe, Mn, Ni, Zn, and Cd) and their concentrations in ppm were also studied using Atomic Absorption Spectroscopy. Phytochemical screening of methanolic extract showed existence of various secondary metabolites, while mucilage and anthraquinones was not detected. The present study helps to understand the taxonomic identification of the plant based on morpho‐anatomical features and throws the attention of the researchers to carry out the work for developing its various formulations, which can ultimately be beneficial for the human beings as well as animals.