Application of Taguchi method in determining optimum level of curing system of NBR/PVC blend

Taguchi method is applied in this study to determine the optimum level of curing system (sulfur, MBTS, and CBS) in a NBR/PVC blend. By considering physicomechanical properties of cured NBR/PVC blend, optimum level of curing system is determined. A fixed master batch formulation of NBR/PVC is used, and the effect of curing system is studied on the physicomechanical properties of NBR/PVC blend, such as tensile strength (TS) and elongation‐at‐break (EB) before and after aging and also hardness and abrasion. The L9 orthogonal array that includes nine rows and four columns is applied. In this matrix, rows show the experiments and three columns show the amount of three factors (sulfur, MBTS, and CBS) and one column is left arbitrarily as an empty column. In this array, the columns are mutually orthogonal. The optimum physicomechanical properties of cured NBR/PVC blend are at 2 phr sulfur, 2 phr MBTS, and 0.5 phr CBS of curing system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5358–5362, 2006     

Efficient repairing effect of PEG based tri-block copolymer on mechanically damaged PC12 cells and isolated spinal cord

Membrane sealing effects of polymersomes made of tri-block copolymer, PEG-co-FA/SC-co-PEG, (PFSP) were studied on isolated spinal cord strips, PC12 cell lines and artificial bilayer following mechanical impact implemented by aneurism clip, sonication and electric shock, respectively. The homogeneity and size of PFSP, membrane permeability and cell viability were assessed by dynamic light scattering, LDH release and MTT assays. According to the results, the biocompatible, physico-chemical, size, surface charge and amphipathic nature of PFSP polymersome makes it an ideal macromolecule to rapidly reseal damaged membranes of cells in injured spinal cord as well as in culture medium. Compound action potentials recorded from intentionally damaged spinal cord strips incubated with PFSP showed restoration of neural excitability by 82.24 % and conduction velocity by 96.72 % after 5 min that monitored in real time. Thus, they triggered efficient instant and sustained sealing of membrane and reactivation of temporarily inactivated axons. Treatment of ultrasonically damaged PC12 cells by PFSP caused efficient cell membrane repair and led to their increased viability. The optimum effects of PFSP on stabilization and impermeabilizing of the lipid bilayer occurred at the same concentrations applied to the damaged cells and spinal cord fibers and was approved by restoration of membrane conductance and calcein release manifested by NanoDrop technique. The unique physico-chemical characteristics of novel polymersomes introduced here, make them capable to reorganize membrane lipid molecules, reseal the breaches and restore the hydrophobic insulation in spinal cord damaged cells. Thus, they might be considered in the clinical treatment of SCI at early stages.     

On the balanced truncation of LTV systems

This note furthers results on the balanced truncation of stable linear time-varying discrete-time systems. The main result contributes better error bounds than the currently available ones in certain model reduction scenarios; this is demonstrated in an example of a four-mass translational system. Also, this note gives new finite error bounds for the balanced truncation of stable eventually periodic models.     

High‐performance carboxylate superplasticizers for concretes: Interplay between the polymerization temperature and properties

Polycarboxylate superplasticizers based on acrylic acid (AA) and maleic anhydride (MAn) were synthesized via free‐radical copolymerization with an ethylene glycol monomer and characterized. The copolymerization temperature (ranging from 50 to 90 °C) appeared to be the key operating factor governing the chemical structure of the superplasticizers. The chemical structures of the products were analyzed by gel permeation chromatography, whereas an optimized sample was further analyzed by Fourier transform infrared spectroscopy and ¹H‐NMR. Superplasticizers of the AA and MAn classes were then incorporated into concrete, and their performances were measured by slump and slump loss tests, where a large dependency of the microstructure on the synthesis temperature was recognized. The optimum temperatures were found to be 50 and 80 °C for the AA and MAn modifiers, respectively. At their own optimum temperatures, the AA and MAn superplasticizer revealed slump losses from 23 to 4 cm and 15 to 5 cm, respectively, after 45 min. The chemical structures of the plasticizers were patterned illustratively to speculate the performance of each superplasticizer according to changes that took place in the backbone length and side‐chain density. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44908.     

Distributed control of LPV systems over arbitrary graphs with communication latency

This paper focuses on spatially distributed control systems where the controller sensing and actuation topology is inherited from that of the plant. Specifically, this paper considers distributed systems composed of discrete‐time linear parameter‐varying subsystems interconnected over general graph structures. These distributed systems are subject to a communication latency of one sampling period, where the information sent by a subsystem at the current time step is received by the target subsystem at the next time step. Analysis and synthesis conditions are derived for control design in this setting using a parameter‐dependent Lyapunov approach with the ?₂‐induced norm as the performance measure. Fast and easy‐to‐implement algorithms are also provided for constructing the controller in real time. The techniques developed are finally applied to a leader‐follower formation problem with intermittent communications.     

Synthesis and characterization of biodegradable block copolymers of poly(propylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) and poly(ethylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol)

The synthesis of two low molecular weight linear unsaturated oligoester precursors, poly(propylene fumarate‐co‐sebacate) (PPFS) and poly(ethylene fumarate‐co‐sebacate) (PEFS), are described. PPFS, PEFS, and poly(ethylene glycol) are then used to prepare poly(propylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) (PPFS‐co‐PEG) and poly(ethylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) (PEFS‐co‐PEG) block copolymers. The products thus obtained are investigated in terms of the molecular weight, composition, structure, thermal properties, and solubility behavior. A number of design parameters including the molecular weights of PPFS, PEFS, and PEG, the reaction time in the polymer synthesis, and the weight ratio of PEG to PPFS or to PEFS are varied to assess their effects on the product yield and properties. The hydrolytic degradation of PPFS‐co‐PEG and PEFS‐co‐PEG in an isotonic buffer (pH 7.4, 37°C) is investigated, and it is found that the fumarate ester bond cleaves faster than does the sebacate ester bond. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 295–300, 2004     

Dendrosomes as novel gene porters‐III

BACKGROUND: It was previously reported that dendrosomes, i.e. neutral, biodegradable, covalent or self‐assembled, hyperbranched, spheroidal nano‐particles with a size ranging from 15 to 100 nm, provide a convenient and efficient means of gene delivery into various kinds of cells such as human hepatoma and kidney cells as well as animal models. RESULTS: New studies via circular dichroism show that hydrophilic and amphipathic dendrosomes either do not affect the DNA structure or moderately transform it from B‐ to A‐conformation. Gene delivery into human liver, kidney, and endothelial cells as well as other animal cells like Bowes, U‐937, Raw, CCRF‐CEM, MOLT‐4, K562, Huh‐7 and VERO reveal that the genes are efficiently expressed and in comparison with other gene porters like Lipofectin or bacterial ghosts, do quite well. It is also shown that dendrosomes are able to deliver genes into cells like endothelials that are usually hard to transfect. Cell culture experiments as well as intraperitoneal/intradermal injections of dendrosomes into mice establish their nontoxicity (up to 2.5 mg kg^?1 of animal weight in the latter case). Studies on immunization of BALB/c mice using conventional adjuvants such as aluminium phosphate, C_pG motif and one of the dendrosomes, indicate that the latter leads to the mildest initial response development while exceeding them afterwards. CONCLUSION: CD studies reveal that, owing to the neutrality of dendrosomes, formation of Den/DNA complexes is accompanied by slight structural modifications of DNA cell culture, and animal studies reveal that dendrosomes are inert, non‐toxic and highly efficient gene porters that perform at extremely low doses. In comparison with bacterial ghosts and some common porters, they are efficient in delivery of genes into animals and a variety of cells including those that are usually hard to transfect. Copyright © 2008 Society of Chemical Industry