Beneficial effects of wettability altering surfactants in oil-wet fractured reservoirs

In fractured reservoirs, an effective matrix-fracture mass transfer is required for oil recovery. Surfactants have long been considered for oil recovery enhancement, mainly in terms of their ability to reduce oil–water interfacial tension. These surfactants are effective when the fractured formations are water-wet, where capillary imbibition of surfactants from the fracture into the matrix contributes to oil recovery. However, another beneficial aspect of surfactants, namely their ability to alter wettability, remains to be explored and exploited. Surfactants capable of altering wettability can be especially beneficial in oil-wet fractured formations, where the surfactant in the fracture diffuses into the matrix and alters the wettability, enabling imbibition of even more surfactant into the matrix. This sequential process of initial diffusion followed by imbibition continues well into the matrix yielding significant enhancements in oil recovery.In order to test this hypothesis of sequential diffusion–imbibition phenomenon, Dual-Drop Dual-Crystal (DDDC) contact angle experiments have been conducted using fractured Yates dolomite reservoir fluids, two types of surfactants (nonionic and anionic) and dolomite rock substrates. A new experimental procedure was developed in which crude oil equilibrated with reservoir brine has been exposed to surfactant to simulate the matrix-fracture interactions in fractured reservoirs. This procedure enables the measurements of dynamic contact angles and oil–water interfacial tensions, in addition to providing the visual observations of the dynamic behavior of crude oil trapped in the rock matrix as it encounters the diffusing surfactant from the fractures. Both the measurements and visual observations indicate wettability alterations of the matrix surface from oil-wet to less oil-wet or intermediate wet by the surfactants. Thus this study is of practical importance to oil-wet fractured formations where surfactant-induced wettability alterations can result in significant oil recovery enhancements. In addition, this study has also identified the need to include contact angle term in the dimensionless Bond number formulations for better quantitative interpretation of rock–fluids interactions.     

In Situ Performance Testing of Deteriorating Water Tanks for Durability Assessment

Reports of failure of existing concrete structures due to a lack of durability, rather than a deficiency in structural strength, has made concrete technologists, engineers, and researchers focus research on the parameters influencing durability performance with respect to time. Systematic performance monitoring, with respect to chosen durability parameters of existing concrete structures, will decide the direction of future research in this area. Inferences based on laboratory simulations and testing need to be confirmed by in situ field measurements and studies. In situ condition rating and performance monitoring surveys have been conducted by many researchers, scientists, and professional associations, and reported in literature. Inferences of few such studies are summarized and discussed. Deterioration of concrete structures constructed in recent times is observed at relatively faster rates, and has been mainly attributed to cracking. Cracking is associated with the use of faster-hydrating portland cements with increased fineness and the tricalcium silicate (C3S) content to support the high speed of modern construction. In the present research, a case study of deteriorated water tank structures situated in the semitropical region of India is presented. Some selected parameters—such as concrete cover, carbonation depth, chloride concentration, compressive strength, etc. which influence long term durability of structures—have been measured.     

Reaction of zirconium fluoride glass with water: kinetics of dissolution

When liquid water contacts a zirconium-barium-lanthanum fluoride glass, at least three different processes occur. Barium and zirconium fluoride dissolve into the water, water penetrates into the glass, and zirconium fluoride crystals grow on the glass surface, in static solution. The rate of dissolution, as measured by solution analysis, is possibly controlled by diffusion in the solid surface; surface blockage and surface reactions are other possible kinetic steps involved. Diffusion in solution is not the controlling mechanism. Hydrogen profiles in the glass surface suggest that the penetration rate of water into the glass is controlled by diffusion and a surface reaction.     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

Photostability of polyetherurethaneureas

Polyetherurethaneureas (PEUUs) were synthesised from polyethylene-glycols (PEGs) of molecular weight 400, 600 and 1000, 4,4′-diphenylmethanediisocyanate (MDI) and aliphatic diamine chain extenders, 1,3-propanediamine (PDA) and 1,6-hexanediamine (HDA). Polymer films were irradiated with 365 nm light at 293 K and the effects of polyether soft segment length and urea hard segment on photo-oxidative stability were studied by following the variation in weight-average molecular weight (M _w), gel formation and stress-strain properties. Changes in ultraviolet and infrared spectroscopy were monitored on photo-oxidation and hydroperoxide content determined. The soft segment length was increased by increasing the molecular weight of PEG from 400 to 1000 and hard segment structure was changed by variation of diamine. It was noted that the structure of urea and polyether soft segment length plays an important role in photostability of PEUUs. PDA chain extended PEUUs were more stable than HDA chain extended PEUUs.     

Trade-off analysis on cost and manufacturing technology of an electronic product: Case study

A trade-off analysis on the cost and system packaging metrics of an electronic product aimed at the commercial/retail industry has been carried out. By comparing the system cost and packaging metrics with those of comparable consumer products, we have determined that there is opportunity for significant cost, size, and weight reduction of the overall electronics packaging system. These include the use of fine pitch IC packages, smaller discrete components, denser PCB wiring technology, double sided IC package surface mount, surface mount connectors, and improved plastics for the product housing. The analysis concluded that PCB area reduction of 40%, using a single PCB instead of three boards, reduction in board cost of over 50% and product weight reduction of over 28% are possible using available technologies.     

The influence of pacing rate and autonomic blockade on human primary and secondary atrial pacemakers

Current gene therapy protocols designed to treat adenosine deaminase (ADA) deficiency and other metabolic disorders suffer from low-efficiency delivery to target cells and a lack of long-term stability in expression of the therapeutic proteins. These problems may be resolved by use of an in vivo dominant selection. The multidrug transporter (MDR1) has been suggested as a useful selective marker for gene therapy. In this work, we co-expressed ADA and MDR1 cDNA in a retroviral vector using an internal ribosome entry site (IRES) from encephalomyocarditis virus. This system produced a bicistronic mRNA containing both ADA and MDR1, which enables co-expression of ADA and MDR1, and also allows the two proteins to be translated separately. After in vitro selection using a cytotoxic MDR1 substrate, vincristine, we demonstrated that functional ADA was co-expressed with MDR1 in proportion to the expression level of MDR1, whereas MDR1 expression was proportional to the stringency of the vincristine selection. Because the efficiency of IRES-dependent translation was much lower than that of cap-dependent translation in this system, we observed lower expression of the genes positioned after the IRES. This asymmetric expression caused a lower viral titer when MDR1 was placed downstream from the IRES, but it also provided a way of modulating the relative expression of ADA and MDR1. The retroviral system described in this work may serve as a useful tool to evaluate the strategies involving in vivo dominant selection for gene therapy of ADA-deficient patients.