Ozonation of Two Acidic Azo Dyes with Different Substituents

The ozonation of two differently substituted azo dyes (Schwarz GRS and Orange Acid 8) in water media is studied. The influence of pH on the effectiveness of the ozonation at various initial concentrations of each dye is explored. It was found out that the rates of decolorization for amino-group substituted dyes reflect the considerable influence by the widely varying initial pH from 4.5 to 10. Specifically, the highest effect of decolorization of this dye was obtained at the highest pH studied (pH 10) for all initial concentrations of the solutions. Considering the dye without an amino-group substitute, the rates of color disappearance in ozonation reflected to a lower degree the variations of the initial pH. Pseudo-first-order trends of decolorization were observed in all the experimental runs. Regarding the kinetic results obtained, an attempt to explain the different dyes reactivity was made based on the absolute electronegativity (E_lumo + E_homo) of both dyes. The COD/BOD analysis shows that the ozonation of both azo dyes can reduce the sample COD but it could not improve the biodegradability ratio (BOD₅/COD). BOD decrease with ozonation time indicates that the intermediates of the ozonation are of lower biodegradability. Oxalic acid was found as the final product of ozonation of both dyes.     

Xylose-lysine model systems: The effect of pH on the volatile reaction products

Aqueous molal solutions of xylose and lysine (initial pH 4–9) were refluxed either with control of the pH at 5–0 or without pH control (final pH 2–6). Analysis by gas chromatography (GC) and GC-mass spectrometry resulted in the identification of 58 and 28 compounds, respectively, from the two systems. Furans were the main reaction products in both systems and 2-furfural alone comprised 522 and 999 g kg^?1 of the volatiles, respectively, from the systems with final pH values of 5–0 and 2–6. Maintaining the pH at 5–0 resulted in a higher yield and greater numbers of nitrogen-containing compounds, and monocyclic pyrroles, pyridines and 2,3-dihydro-l H-pyrrolizines were identified only in that system. Aliphatic compounds, alicyclic compounds, benzene derivatives. l-(2–furfuryl)pyrroles and pyrazines were also identified. This investigation is the first report of the formation of 2.3-dihydro-l H-pyrrolizines in a model system containing lysine as the amino compound; a possible mechanism is proposed.     

Optimal synthesis of tunable elastic wave-guides

Topology optimization, or control in the coefficients of partial differential equations, has been successfully utilized for designing wave-guides with precisely tailored functionalities. For many applications it would be desirable to have the possibility of drastically altering the wave-guiding properties of a device “on the fly,” in a controllable manner as an influence of some external input. This would enable wave-guides with highly non-linear input-output mappings, such as for example controllable wave switches.In this paper, we propose using finite elastic pre-straining for the purpose of tuning a wave-guide. In order to systematically formulate and solve the wave-guide synthesis problems we utilize mathematical programming methods in conjunction with topology optimization for parametrizing the design space. The resulting extremal problem is, from a practical point, equivalent to finding an optimal subdivision of a given control volume into two disjoint subsets occupied by two different materials, normally resulting in a highly heterogeneous elastic body with desired wave-guiding functionalities in the original and finitely deformed configurations.The proposed methodology is illustrated with numerical examples.     

Orthogonal space-time block codes: maximum likelihood detection for unknown channels and unstructured interferences

Space-time coding (STC) schemes for communication systems employing multiple transmit and receive antennas have been attracting increased attention. The so-called orthogonal space-time block codes (OSTBCs) have been of particular interest due to their good performance and low decoding complexity. In this paper, we take a systematic maximum-likelihood (ML) approach to the decoding of OSTBC for unknown propagation channels and unknown noise and interference conditions. We derive a low-complexity ML decoding algorithm based on cyclic minimization and assisted by a minimum amount of training data. Furthermore, we discuss the design of optimal training sequences and optimal information transfer to an outer decoder. Numerical examples demonstrate the performance of our algorithm.     

Age-dependent variations in the sexual preference of male rats

Male rats were tested for their sexual preference behavior at either 37, 70, 90, or 150 days of age on three different occasions; while still sexually naive, after sexual experience with a receptive female, and while sexually aroused by having initiated copulation. These tests resulted in the following findings: a) 37-day-old sexually naive males showed a preference for other males and failed to show a preference for either sex after exposure to females; b) 70- and 90-day-old males showed a statistically significant preference for the female after acquiring sexual experience; c) 150-day-old animals showed a female-oriented preference only after being sexually aroused with two intromissions preceding the preference test, and d) none of the age groups tested showed a female-oriented preference without previous exposure to females. It was then concluded that a) female-oriented behavior requires sexual experience and b) the effects of experience varies with age.     

State multiplicity in CSTR-separator-recycle polymerisation systems

This article continues earlier work (Comput. Chem. Eng. 24 (2000) 209) concerning the design and control of isothermal reactor-separator-recycle systems. The multiplicity behaviour of six reaction systems of increasing complexity, from one-reactant, first-order reaction to chain-growth polymerisation, is investigated. Below a critical value of the plant Damkohler number, Da<Da^cr, the only steady state involves infinite flow rates. Feasible steady states become possible if the critical value is exceeded, Da>Da^cr. For one-reaction systems, one stable steady state is born at a transcritical bifurcation. For consecutive-reaction systems, including polymerisation, a fold bifurcation can lead to two feasible steady states. Moreover, the transcritical bifurcation is destroyed when two reactants are involved. If the gel-effect is included, a maximum of four steady states are possible. When multiple steady states exist, the achievable conversion is constrained by the instability of the low-conversion branch. This has practical importance for polymerisation systems when the radicals’ quasi-steady state assumption is not valid or the gel effect is significant.     

DMT／PTA工艺的技术改进

改进的DMT/PTA工艺技术是由苏尔寿化工有限公司和H&G Hegmanns公司联合开发的。该技术对Witten-Katzschmann工艺进行了大量改进,并结合了苏尔寿公司的环境友好熔融结晶技术。改进的工艺包括:氧化反应部分(有效回收了副产品和能量);粗酯和副产品蒸馏;采用熔融结晶技术精制DMT。     

Risk evaluations for the courts: Is service quality a function of specialization?

Psychologists are often asked to testify in court. However, concerns have been expressed in both the legal and psychological literatures about the quality of these services. This article presents survey results comparing the practice patterns of generally licensed psychologists with those of specialist forensic diplomates in providing risk evaluations. Results suggest that general clinicians frequently perform these evaluations, but forensic diplomates use more modern risk instruments, are more aware of the scientific literature, and provide the court with more information about the scientific basis of their testimony. The implication of these results for legal professionals, psychologist training, and practice are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mobile robot localization: integrating measurements from atime-of-flight laser

This paper presents an algorithm for environment mapping by integrating scans from a time-of-flight laser and odometer readings from a mobile robot. The range weighted Hough transform (RWHT) is used as a robust method to extract lines from the range data. The resulting peaks in the RWHT are used as feature coordinates when these lines/walls are used as landmarks during navigation. The associations between observations over the time sequence are made in a systematic way using a decision directed classifier. Natural geometrical landmarks are described in the robot frame together with a covariance matrix representing the spatial uncertainty. The map is thus built up incrementally as the robot moves. If the map is given in advance, the robot can find its location and navigate relative to this a priori given map. Experimental results are presented for a mobile robot with a scanning range measuring laser having 2-cm resolution. The algorithm was also used for an autonomous plastering robot on a construction site. The sensor fusion algorithm makes few erroneous associations