Antiviral Effect of Saccharomyces cerevisiaeβ‐glucan to Swine Influenza Virus by Increased Production of Interferon‐γ and Nitric Oxide

The aim of these experiments was to investigate the potential antiviral effect of Saccharomyces cerevisiaeβ‐glucan on the pneumonia induced by swine influenza virus (SIV). Forty colostrum‐deprived 5‐day‐old piglets were randomly divided into four groups of 10. The 20 pigs in groups 1 and 2 were administered Saccharomyces cerevisiaeβ‐glucan orally (50 mg/day/pig; En‐Bio Technology Co., Ltd) for 3 days before SIV infection and those in groups 3 and 4 were given culture medium/diluent alone. Groups 1 and 3 were inoculated intranasally with 3 ml of tissue culture fluid containing 2 × 10⁶ tissue culture infective doses 50% (TCID₅₀)/ml of SIV and those in groups 2 and 4 were exposed in the same manner to uninfected cell culture supernatant. The microscopic lung lesions induced by SIV infection (group 1 pigs) were significantly more severe than those induced by infection in animals pre‐administered β‐glucan (group 3) (P < 0.05). Significantly more SIV nucleic acid was detected in the lungs of pigs experimentally infected with SIV only (group 1) at 5, 7 and 10 days post‐inoculation (dpi) compared with lungs from pigs pre‐administered β‐glucan and infected with SIV (group 3) (P < 0.05). The concentrations of interferon‐γ (IFN‐γ) and nitric oxide (NO) in bronchoalveolar lavage fluid from pigs pre‐administered β‐glucan and infected with SIV (group 3) were significantly higher than for any other group at 7 and 10 dpi for IFN‐γ, and at 5, 7 and 10 dpi for NO (P < 0.05). Saccharomyces cerevisiaeβ‐glucan reduced the pulmonary lesion score and viral replication rate in SIV‐infected pigs. These findings support the potential application of β‐glucan as prophylactic/treatment agent in influenza virus infection.     

Development of a joint system using a compressed wooden fastener I: evaluation of pull-out and rotation performance for a column—sill joint

Compressed wooden plates and dowels were used to connect members in post-and-beam structures as a substitute for a steel fastener. In order to take advantage of the characteristic properties of compressed wood and to achieve optimum joint performance, two compressed wooden plates were used in each joint to give multiple shear planes for each compressed wooden dowel. Consequently, this type of joint showed very good properties in pull-out and momen-trotation performance, and its engineering design could be further optimized. This joint is expected to be introduced to many kinds of structural systems, including long-span frame structures made of domestic timber found in Japanese residential houses.     

DNA profiling and genetic diversity of Korean soybean (<Emphasis Type="Italic">Glycine max</Emphasis> (L.) Merrill) landraces by SSR markers

Approximately 7,000 accessions of Korean soybean (Glycine max (L.) Merrill) landraces, largely composed of three collections, the Korea Atomic Energy Research Institute’s soybean (KAS), the Korean Crop Experiment Station’s soybean (KLS) and the Korean Agricultural Development and Technology Center’s soybean (KADTC) collections, have been conserved at the Rural Development Administration (RDA) genebank in Korea. The accessions within collections were classified based on their traditional uses such as sauce soybean (SA), sprouted soybean (SP), soybean for cooking with rice (SCR), and OTHERS. A total of 2,758 accessions of Korean soybean landraces were used to profile and to evaluate genetic structure using six SSR loci. A total of 110 alleles were revealed by at the six SSR loci. The number of alleles per SSR locus ranged from 9 to 39 in Satt187 and Satt_074, respectively. The number of alleles ranged from 87 in the KADTC collection to 96 in the KLS collection, and from 63 in the SCR group to 95 in the SP group. Nei’s average genetic diversity ranged from 0.68 to 0.70 across three collections, and 0.64 to 0.69 across the usage groups. The average between-group differentiation (G _st) was 0.9 among collections, and 4.1 among the usage groups. The similar average diversity among three collections implies that the genetic background of the three collections was quite similar or that there were a large number of duplicate accessions in three collections. The selection from the four groups classified based upon usage may be a useful way to select accessions for developing a Korean soybean landrace core collection at the RDA genebank. DNA profile information of accessions will provide indications of redundancies or omissions and aid in managing the soybean collection held at the RDA genebank. The information on diversity analysis could help to enlarge the genetic diversity of materials in breeding programs and could be used to develop a core collection.     

An efficient method to produce segregating populations in quinoa (Chenopodium quinoa)

Quinoa offers a promising alternative for staple food, considering its outstanding nutritional value and tolerance to abiotic stresses. To develop breeding programmes in quinoa, a reliable crossing method for increasing the genetic variation is required. In the following study, we aimed to develop segregating populations in quinoa. We tested the efficiency of three different crossing methods (hand emasculation, warm water emasculation and no emasculation). Moreover we developed a two-stage selection strategy based on morphological traits and molecular markers for the selection of hybrid plants. We reported hand emasculation to be the most efficient crossing method, followed by warm water emasculation and no emasculation. Our results demonstrated that crosses in quinoa can be successfully performed, despite its complicated flower structure and high self-pollination rate. Additionally, we developed 30 segregating populations from crosses between accessions of different origins with varying phylogenetic relationship, which offers a promising perspective for quinoa breeding programmes in the future.     

A 3D-Printed Polycaprolactone/Marine Collagen Scaffold Reinforced with Carbonated Hydroxyapatite from Fish Bones for Bone Regeneration

In bone tissue regeneration, extracellular matrix (ECM) and bioceramics are important factors, because of their osteogenic potential and cell–matrix interactions. Surface modifications with hydrophilic material including proteins show significant potential in tissue engineering applications, because scaffolds are generally fabricated using synthetic polymers and bioceramics. In the present study, carbonated hydroxyapatite (CHA) and marine atelocollagen (MC) were extracted from the bones and skins, respectively, of Paralichthys olivaceus. The extracted CHA was characterized using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) analysis, while MC was characterized using FTIR spectroscopy and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The scaffolds consisting of polycaprolactone (PCL), and different compositions of CHA (2.5%, 5%, and 10%) were fabricated using a three-axis plotting system and coated with 2% MC. Then, the MC3T3-E1 cells were seeded on the scaffolds to evaluate the osteogenic differentiation in vitro, and in vivo calvarial implantation of the scaffolds was performed to study bone tissue regeneration. The results of mineralization confirmed that the MC/PCL, 2.5% CHA/MC/PCL, 5% CHA/MC/PCL, and 10% CHA/MC/PCL scaffolds increased osteogenic differentiation by 302%, 858%, 970%, and 1044%, respectively, compared with pure PCL scaffolds. Consequently, these results suggest that CHA and MC obtained from byproducts of P. olivaceus are superior alternatives for land animal-derived substances.     

Analysis of Variation in Anthocyanin Composition in Korean Coloured Potato Cultivars by LC-DAD-ESI-MS and PLS-DA

Anthocyanin concentration and composition and the effect of steaming and baking on these were evaluated in tubers of Korean red- and purple-fleshed potato cultivars and breeding clones using liquid chromatography with diode array detection and electrospray ionization-mass spectrometry (LC-DAD-ESI-MS). Twenty-six anthocyanins were isolated, of which 24 were identified. Remarkably, five cis isomers were identified, of which four, viz., cis-petanin, cis-peonanin, petunidin 3-cis-caffeoylrutinoside-5-glucoside, and petunidin 3-cis-feruloylrutinoside-5-glucoside, are reported for the first time. Moreover, pelargonidin 3-p-coumaroylrutinoside-5-glucoside (pelanin), peonidin 3-p-coumaroylrutinoside-5-glucoside (peonanin) and petunidin 3-p-coumaroylrutinoside-5-glucoside (petanin) were identified as the principal anthocyanins. We found that the total anthocyanin content of coloured potatoes was decreased by steaming and baking compared with the raw state. In addition, we performed partial least square discriminant analysis (PLS-DA) to discriminate between the analyzed anthocyanins. Cis isomers seemed to play a vital role as a biomarker in the PLS-DA model based on the type of processing and colour of the tubers.     

A magnetic nanoprobe technology for detecting molecular interactions in live cells

Technologies to assess the molecular targets of biomolecules in living cells are lacking. We have developed a technology called magnetism-based interaction capture (MAGIC) that identifies molecular targets on the basis of induced movement of superparamagnetic nanoparticles inside living cells. Efficient intracellular uptake of superparamagnetic nanoparticles (coated with a small molecule of interest) was mediated by a transducible fusogenic peptide. These nanoprobes captured the small molecule's labeled target protein and were translocated in a direction specified by the magnetic field. Use of MAGIC in genome-wide expression screening identified multiple protein targets of a drug. MAGIC was also used to monitor signal-dependent modification and multiple interactions of proteins.     

Prediction of bending properties for structural glulam using optimized distributions of knot characteristics and laminar MOE

This study established a prediction model for bending properties of glued-laminated timber (glulam) using optimized knot and modulus of elasticity (MOE) distributions of lumber laminate as the main input variables. For this purpose, knot and MOE data were investigated for all pieces of lumber that were prepared for glulam manufacturing, and statistical distributions of knot size, knot number in one lumber, and MOE of each laminate were optimized as distribution functions. These knot and MOE data were used as input variables in the prediction model for bending properties, and were also used in generating virtual glulam using the inverse transform method. Prediction of bending properties for glulam was carried out using the transformed section method, which is partially provided in ASTM D 3737 (Annex A4). Predicted values were compared with those from full-scale four-point bending tests for 60 six-layered glulams with 10 different laminar combinations. Finally, the allowable bending properties of glulam for each specific laminate combination were determined by calculating the fifth percentile of the modulus of rupture and the average modulus of elasticity from virtual test results of more than 1000 virtual glulams. From the results of this study, predicted bending properties for glulam and their distributions could be used for structural design in both allowable stress design and limit state design.     

Early survival of Quercus ilex subspecies from different populations after infections and co‐infections by multiple Phytophthora species

Forests in Europe are threatened by increased diversity of Phytophthora species, but effects on trees of simultaneous infections by Phytophthora and ecological consequences of their coexistence are unknown. This study explored variation in early survival of Quercus ilex to Phytophthora infections and assessed interactions between Phytophthora species when trees were co‐infected. Three Phytophthora species (P. cinnamomi, P. gonapodyides and P. quercina), seeds from 16 populations of Q. ilex (ballota and ilex subspecies) and two infection times were used as sources of variation in two experiments. The influence of Phytophthora species, Q. ilex subspecies and populations on plant germination and survival were analysed using generalized linear mixed models and survival analysis techniques. Germination rates were not influenced by Phytophthora spp. (P = 0.194) but by the subspecies and populations of Q. ilex (P < 0.001). In Phytophthora‐infested soils, Q. ilex subsp. ilex germinated at higher rates than Q. ilex subsp. ballota. Plant survival was strongly influenced by Phytophthora species (P < 0.001), not by the subspecies and populations of Q. ilex. Seedling mortality was reduced and delayed if a less virulent Phytophthora species infected plants prior to infection by a more virulent Phytophthora species. The results help to explain oak decline syndrome and the lack of natural and artificial regeneration of Q. ilex forests. Lack of interspecific variability of early survival to Phytophthora spp. discourages direct sowing for artificial reforestation programmes. Large, thick seeds, giving plants rapid growth, are advantageous traits when soils are infested with Phytophthora spp.