Gas-phase structure of protonated histidine and histidine methyl ester: combined experimental mass spectrometry and theoretical ab initio study

Gas-phase H/D exchange experiments with CD3OD and D2O and quantum chemical ab initio G3(MP2) calculations were carried out on protonated histidine and protonated histidine methyl ester in order to elucidate their bonding and structure. The H/D exchange experiments show that both ions have three equivalent fast hydrogens and one appreciably slower exchangeable hydrogen assigned to the protonated amino group participating in a strong intramolecular hydrogen bond (IHB) with the nearest N(sp2) nitrogen of the imidazole fragment and to the distal ring NH-group, respectively. It is taken for granted that the proton exchange in the IHB is much faster than the H/D exchange. Unlike in other protonated amino acids (glycine, proline, phenylalanine, tyrosine, and tryptophan) studied earlier, the exchange rate of the carboxyl group in protonated histidine is slower than that of the amino group. The most stable conformers and the enthalpies of neutral and protonated histidine and its methyl ester are calculated at the G3(MP2) level of theory. It is shown that strong intramolecular hydrogen bonding between the amino group and the imidazole ring nitrogen sites is responsible for the stability and specific properties of the protonated histidine. It is found that the proton fluctuates between the amino and imidazole groups in the protonated form across an almost vanishing barrier. Proton affinity (PA) of histidine calculated by the G3(MP2) method is 233.2 and 232.4 kcal mol(-1) for protonation at the imidazole ring and at the amino group nitrogens, respectively, which is about 3-5 kcal mol(-1) lower than the reported experimental value.     

Determination of chloride by stripping chronopotentiometry with silver-film electrode

The experimental parameters of cathodic stripping chronopotentiometry of chloride at a silver-film electrode are investigated and optimized. The chloride preconcentration is achieved in the form of silver chloride by a controlled potential oxidation of the working electrode under vigorous stirring. Cathodic stripping of the deposit is obtained by the constant current, under the condition of diffusive mass transfer. Deaeration of the solution is not necessary. A detection limit of 35 μ dm⁻³ (10⁻⁶ mol dm⁻³) is obtained at a deposition time of 180 s, with a reproducibility of 6.7 % (expressed as relative standard deviation, RSD).     

1,8-bis(dimethylethyleneguanidino)naphthalene: tailoring the basicity of bisguanidine "proton sponges" by experiment and theory

1,8-bis(dimethylethyleneguanidino)naphthalene (DMEGN), the second example of a peralkyl guanidine "proton sponge" based on the 1,8-naphthalene backbone, was prepared and fully characterized. The crystal structure analysis of monoprotonated DMEGN reveals an unsymmetrical intramolecular hydrogen bridge. A decrease in the basicity with respect to the noncyclic parent 1,8-bis(tetramethylguanidino)naphthalene was found. Nevertheless, a new proton sponge provides a new crossbar in the ladder of highly basic neutral organic compounds. A detailed theoretical study of DMEGN and related cyclic guanidines explains this surprising experimental result. Homodesmotic reactions reveal that the intramolecular hydrogen bond contributes effectively 10 kcal/mol to proton affinity of DMEGN.     

Donor–acceptor complexes in copolymerization. XLIII. Cyclization of alternating and random styrene–(meth)acrylic ester copolymers

Equimolar alternating copolymers of styrene and methyl methacrylate (prepared with Et_1.5AlCl_1.5, SnCl₄, and ZnCl₂) as well as equimolar random copolymer were treated with polyphosphoric acid at 135°C. The extent of cyclization of the alternating copolymers was about 40%, independent of the cotacticity of the copolymer, and there was little or no crosslinking. The random copolymer underwent only 10% cyclization and considerable crosslinking. The extent of cyclization of the alternating copolymer of styrene and methyl acrylate (prepared with Et_1.5AlCl_1.5) was the same as that of the random copolymer and was lower than that of the corresponding methyl methacrylate copolymer. Both alternating and random copolymers underwent extensive crosslinking.     

Additivity of the proton affinity of polysubstituted benzenes: the ipso position

It is shown, by the MP2(fc)/6-31G^{* *}/ /HF/6-31G^* +ZPE(HF/6-31G^*) theoretical model and concomitant use of homodesmic reactions, that the ipso proton affinities in polyfluorinated benzenes follow a simple additivity rule. Performance of the latter is good, as evidenced by a low average absolute deviation Δ_abs = 0.8 kcal/mol from the accurate ab initio results. Additional evidence supporting the additivity concept is provided by good accordance with the experimental proton affinity (PA) for perfluorobenzene. The present approach enables estimates of the ipso PAs of multiply substituted aromatics. It is particularly useful in those systems which involve or atomic groupings with lone pairs of electrons proximate to the aromatic π moiety. The additivity rule of thumb offers a simple rationalization of the ipso proton affinities. The origin of the PA additivity is briefly discussed.     

Design and construction of an quasi-adiabatic dissolution calorimeter with a novel dosing apparatus and a low heat capacity

A quasi-adiabatic calorimeter for determining the molar solution enthalpies (Δ_sol H) of non-volatile solids was constructed. The design of the instrument was adjusted to allow the determination of solution enthalpies of small amounts of solids. For that purpose, the novel apparatus for sample dosage with virtually negligible “blank heat” was built. The rather low heat capacity of the calorimeter was achieved by reducing the volume of the reaction cell (20 mL), the dosing unit, and electric elements (the thermistor and the heater). Good thermal isolation of the reaction cell from the surroundings was accomplished by placing the cell into an evacuated polypropylene vessel. A computer program for processing the calorimetric data according to modified Regnault–Pfaundler method was written. The performance of the calorimeter was tested by determining the heats of the reactions serving as thermochemical standards at 25 °C (the dissolution of KCl and NaCl in water and the dissolution of tris(hydroxymethyl)-aminomethane in 0.1 mol dm^?3 HCl(aq)). The obtained data were in very good agreement with the literature values.     

A new framework for implicit restarting of the Krylov–Schur algorithm

This paper introduces a new framework for implicit restarting of the Krylov–Schur algorithm. It is shown that restarting with arbitrary polynomial filter is possible by reassigning some of the eigenvalues of the Rayleigh quotient through a rank‐one correction, implemented using only the elementary transformations (translation and similarity) of the Krylov decomposition. This framework includes the implicitly restarted Arnoldi (IRA) algorithm and the Krylov–Schur algorithm with implicit harmonic restart as special cases. Further, it reveals that the IRA algorithm can be turned into an eigenvalue assignment method. Copyright © 2014 John Wiley & Sons, Ltd.     

A simple adsorptive chronopotentiometric stripping method for determination of vitamin B 1 in pharmaceutical products

A new electroanalytical method for vitamin B1 determination, based on adsorptive chronopotentiometric stripping analysis and non-specific adsorption onto mercury film electrode, was developed and validated. Stripping chronopotentiograms showed a single well-defined oxidation wave corresponding to vitamin B1 at about − 0.43 V in citrate buffer pH 6.0. The most important experimental factors affecting the monitored electroanalytical response of vitamin B1 were investigated and optimised. Under the optimal experimental conditions, linear response of vitamin B1 was obtained in the concentration range of 5–50 mg dm−3, with the achieved limit of detection of 1.64 mg dm−3, and the limit of quantitation of 4.97 mg dm−3. A mean recovery of 97.1% and relative standard deviations of 3.75% were achieved. The developed electrochemical procedure was successfully applied for the determination of vitamin B1 in pharmaceutical products. The results of the proposed method were in good agreement with those obtained by parallel HPLC analyses, confirming an accuracy of the developed method.