Finite-time boundedness of uncertain Hamiltonian systems via sliding mode control approach

Nonlinear Dynamics - This paper seeks to address the problem of finite-time stabilization for a class of uncertain Hamiltonian systems via sliding mode control approach. A novel sliding function in...     

A new method for atmospheric nitrogen dioxide measurements using the combination of a stripping coil and fluorescence detection.

A new stripping coil for the collection of nitrogen dioxide (NO2) has been developed to increase its versatility and efficiency. Nitrogen dioxide measurements based on quantitative collection through a reaction coil into an alkaline solution has been examined. Nitrogen dioxide is collected in a 0.1 N NaOH solution. This collection system has an efficiency of nearly 100%. The absorbed nitrogen dioxide has been measured by fluorescence detection with sub-ppbv detection limits. The excitation wavelength at 360 nm and the produced emission wavelength at 405 nm were suitable for nitrite ion measurements.     

Global stability and periodic solution of the viral dynamics

It is well known that the mathematical models provide very important information for the research of human immunodeficiency virus-type 1 and hepatitis C virus (HCV). However, the infection rate of almost all mathematical models is linear. The linearity shows the simple interaction between the T cells and the viral particles. In this paper, we consider the classical mathematical model with saturation response of the infection rate. By stability analysis we obtain sufficient conditions on the parameters for the global stability of the infected steady state and the infection-free steady state. We also obtain the conditions for the existence of an orbitally asymptotically stable periodic solution. Numerical simulations are presented to illustrate the results.     

Simulation of island aggregation influenced by substrate temperature, incidence kinetic energy and intensity in pulsed laser deposition

Using kinetic Monte Carlo method, we have simulated a pulsed energetic growth process in pulsed laser deposition. During the growth of film, substrate temperature mainly influences upon film morphology by directly enhancing the adatom mobility through the temperature-dependent thermal vibration. By contrast, the effect of incidence kinetic energy on film growth is complex resulting from the collisions between the incident particles and the adatoms. The results show that improving incident kinetic energy cannot significantly accelerate the migration rate of adatom but change surface microstructure and promote single adatom formation resulting in more island aggregation density. Moreover, since pulse-influx characterizes pulsed laser deposition, the intensity per pulse contributes to the evolvement of nucleation density and the results illustrate that a general scaling law different from ordinary power law still exists in energetic growth of pulsed laser deposition.     

Permanence and stability of a predator–prey system with stage structure for predator

A stage-structured predator–prey system with delays for prey and predator, respectively, is proposed and analyzed. Mathematical analysis of the model equations with regard to boundedness of solutions, permanence and stability are analyzed. Some sufficient conditions which guarantee the permanence of the system and the global asymptotic stability of the boundary and positive equilibrium, respectively, are obtained.     

Mechanical endurance of polymer electrolyte membrane and PEM fuel cell durability

The life of proton exchange membrane fuel cells (PEMFC) is currently limited by the mechanical endurance of polymer electrolyte membranes and membrane electrode assemblies (MEAs). In this paper, the authors report recent experimental and modeling work toward understanding the mechanisms of delayed mechanical failures of polymer electrolyte membranes and MEAs under relevant PEMFC operating conditions. Mechanical breach of membranes/MEAs in the form of pinholes and tears has been frequently observed after long‐term or accelerated testing of PEMFC cells/stacks. Catastrophic failure of cell/stack due to rapid gas crossover shortly follows the mechanical breach. Ex situ mechanical characterizations were performed on MEAs after being subjected to the accelerated chemical aging and relative humidity (RH) cycling tests. The results showed significant reduction of MEA ductility manifested as drastically reduced strain‐to‐failure of the chemically aged and RH‐cycled MEAs. Postmortem analysis revealed the formation and growth of mechanical defects such as cracks and crazing in the membranes and MEAs. A finite element model was used to estimate stress/strain states of an edge‐constrained MEA under rapid RH variations. Damage metrics for accelerated testing and life prediction of PEMFCs are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2346–2357, 2006     

熔融碳酸盐燃料电池阳极材料表面改性

选择铌作为合金化元素，通过氟化物熔盐电化学表面合金化的方法对熔融碳酸盐燃料电池阳极材料镍进行表面改性，改性后的阳极材料的耐蚀性能与电催化性能均得到明显的改善。     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.     

聚酰亚胺/二氧化硅纳米尺度复合材料的研究

通过正硅酸乙酯（ＴＥＯＳ）在聚酰胺酸（ＰＡＡ）的Ｎ，Ｎ’ 二甲基乙酰胺（ＤＭＡｃ），溶液中进行溶胶 凝胶反应，制备出不同二氧化硅含量的聚酰亚胺／二氧化硅（ＰＩ／ＳｉＯ２）复合薄膜材料．二氧化硅含量低于１０ｗｔ％的样品是透明浅黄色薄膜；二氧化硅含量高于１０ｗｔ％的样品是不透明棕黄色薄膜．利用红外光谱、扫描电镜、热失重分析、动态力学分析、热膨胀系数测试和应力 应变测试等方法研究了此类材料的结构与性能．结果表明，ＰＩ／ＳｉＯ２纳米复合材料具有较聚酰亚胺更高的热稳定性和更高的模量；线膨胀系数显著降低；拉伸强度和断裂伸长随二氧化硅含量而变化，分别在１０ｗｔ％和３０ｗｔ％附近出现最大值     

A new inorganic–organic hybrid compound constructed from polyoxoanions and rare earth coordination complexes

A new chainlike polymer, Na[Ce(dipic)(H₂O)₃]₂ [CrMo₆H₆O₂₄] · 13H₂O (H₂dipic = pyridine-2,6-dicarboxylic acid) (1), has been synthesized and characterized by elemental analysis; IR and XPS spectroscopy, TG analysis, and single-crystal X-ray diffraction. Compound (1) is built up of Anderon-type polyoxoanions as structural motifs and cerium–dipic coordination fragments as linkers to yield an unprecedented one-dimensional chain. Such chains are further in close contact forming a three-dimensional supramolecular framework with channels via extensive hydrogen-bonding interactions among polyoxoanions, dipic ligands and water molecules. Furthermore, the magnetic properties of compound (1) have been studied by measuring their magnetic susceptibility in the temperature range 2–300 K.