Optimal design of gears contact interface modification for an objective as minimum impact resistance of initial meshing-in time domain

Meccanica - In gear pair actual alternating meshing process, the comprehensive errors of the transmission system and the thermal elastic deformation of the teeth body cause the gears in the meshing...     

40W/20K单级G-M制冷机设计与研究

目前商用G-M制冷机在20K时的制冷量一般小于10W,然而工业界对20K时具有更大制冷量的制冷机需求正在不断增长。文中对影响单级G-M制冷机制冷量的因素进行分析,提出相应的解决措施;并针对高温超导应用技术和一些低温系统工程项目的需求,设计了40W/20K单级G-M制冷机样机。     

Super-thin cloaks mediated by spoof surface plasmons

We demonstrated the possibility of designing super-thin electromagnetic cloaks based on spoof surface plasmon (SSP). Using a metamaterial layer, incident waves can be coupled into SSP efficiently at the air/metamaterial interface. Due to the strong surface confinement of SSP, EM waves are squeezed into and propagate in deep sub-wavelength scales. Implementation of an 8.2 GHz cloak less than 1/50 the cloaking diameter was presented using split ring resonator (SRR). Excellent cloaking effect was verified by simulations. Rather than isolating objects from the background, such cloaks can drastically enhance the field intensity around the cloaked object. This is of particular importance in applications such as weak wave detection and near-field sensing.     

基于扩散强化的Pickering界面生物催化系统构建及CO2矿化过程研究

CO₂的有效利用有助于解决环境和生态问题.碳酸酐酶(CA)等酶分子可精准活化CO₂分子以降低反应能垒,为CO₂的高效和高选择性转化提供了一种有前景的途径.然而,酶离开生物体后易失活,且难以重复利用.目前,包埋型固定化酶是常用且有效的提高酶稳定性与回用率的方法之一,但载体的存在会造成反应物CO₂内扩散阻力增加,降低反应活性.此外,CO₂酶促转化是一个气-液-固三相反应过程,反应体系中CO₂的外扩散性能也需要加强.金属有机骨架(MOFs),特别是咪唑酯骨架(ZIFs),常被用作酶固定化的载体.ZIFs的拓扑结构可被设计成不同形貌,进而通过ZIFs的结构工程来加强分子向其中的内扩散.Pickering乳液是指以固体颗粒代替常规表面活性剂而稳定的乳液.当固体颗粒具有催化活性时,催化剂颗粒会扩大液-液-固或气-液-固三相接触面积,从而有效协调反应物在不同相中的扩散时间.如果酶被用作这些颗粒的活性中心,所制备的Pickering乳液也可能具备类似的特性,可加强底物分子向酶的外扩散.本文选择两种具有不同结构的ZIFs(ZIF-L和ZIF-8),原位包埋CA后形成CA@ZIFs颗粒以稳定Pickeirng乳液.ZIF-L和CA@ZIF-L颗粒显示出独特的二维层状堆叠结构.ZIF-8和CA@ZIF-8颗粒呈棱角清晰的十二面体结构.与CA@ZIF-8颗粒相比,CA@ZIF-L颗粒显示出更大的孔径和更宽的孔径分布,这有助于CO₂从CA@ZIF-L颗粒表面扩散至酶活性中心.利用酶活测试来研究内扩散是否通过结构工程得到了加强,发现CA@ZIF-L颗粒的活性比CA@ZIF-8颗粒高22.3%,推测这是由于CA@ZIF-L颗粒特殊的十字花状结构会缩短CO₂从颗粒表面扩散至酶活性中心的距离.同时,十字花状结构可暴露更多的酶活性位点(CA@ZIF-L颗粒的暴露面积是CA@ZIF-8颗粒的~8倍),从而提升了反应物浓度并显示出更高的催化活性.本文还设计了吸附实验来进一步验证上述假设,发现BSA@ZIF-L颗粒对香豆素的吸附率远高于BSA@ZIF-8颗粒,说明与ZIF-8相比,酶包埋于ZIF-L具有更强的捕获小分子的能力,表明CO₂分子向CA@ZIF-L的扩散速度更快,即CA@ZIF-L的十字花状结构可强化系统的内扩散过程.进一步比较了PIBS和游离多酶体系的催化活性,将CO₂通入每个系统,在反应前20 min,PIBS的pH值下降速度比游离体系快得多,说明PIBS通过在气相和液相间构建更大的界面,缩短了CO₂向CA的扩散距离,从而提高了催化效率,促进了CO₂转化.上述假设也通过扩散动力学的计算得到了验证.为进一步研究PIBS的CO₂矿化能力,本文开展了CaCO₃矿化反应,发现PIBS的CaCO₃产量远高于游离多酶体系,表明构建的PIBS在强化内外扩散方面具有显著优势.最后,评估了PIBS在工业应用中的性能,由CA@ZIF-L和CA@ZIF-8颗粒构建的PIBS显示出较好的可回收性,在第8个循环后,PIBS仍可保持8.9 mg/5 min的CaCO₃产量.综上,PIBS可为CO₂的酶促转化和框架提供一个新方法和新平台.     

Simultaneous photoelectrochemical detection of dual microRNAs by capturing CdS quantum dots and methylene blue based on target-initiated strand displaced amplification

Herein,we propose a novel photoelectrochemical(PEC) biosensor for dual microRNAs(miRNAs) highly sensitive and simultaneous biosensing based on strand displaced amplification(SDA) reaction.The recognition of H_(miR-21) and H_(let-7 a) by microRNA-21 and let-7 a leads to their change in hairpin structures,subsequently initiating the immobilization of abundant CdS quantum dots(CdS QD s) and methylene blue(MB) based on SDA reaction.The immobilized CdS QDs and MB produce both high PEC currents under430 nm light and 627 nm light illumination,respectively,and the generated PEC currents are closely relied on target miRNAs amounts.Thus,highly sensitive and simultaneous detection of microRNA-21 and let-7 a was readily achieved with detection limit at 6.6 fmol/L and 15.4 fmol/L based on 3σ,respectively.Further,this PEC biosensor was applied in simultaneous analysis of miRNA-21 and let-7 a in breast cancer patient's serum with acceptable results.We expect this biosensor will find more useful application in diagnosis of miRNA-related diseases.     

单级G-M150制冷机性能实验研究

为满足高温超导和低温气体处理系统等工程应用项目的大冷量需求,单级大冷量G-M制冷机成为目前国内外的研究热点。文章中描述了以G-M150为基础的制冷机综合性能测试方法及实验平台,并对其制冷温度和制冷量两个主要性能的影响因素进行实验研究,为探讨20K单级大冷量G-M制冷机的研究提供参考。     

The scheduling of deliveries in a production-distribution system with multiple buyers

In a real production and distribution business environment with one supplier and multiple heterogeneous buyers, the differences in buyers’ ordering cycles have influence on production arrangements. Consequently, the average inventory level (AIL) at the supplier’s end is affected by both the production policy and the ordering policy, typically by the scheduling of deliveries. Consequently, the average inventory holding cost is most deeply affected. In this paper, it is proposed that the scheduling of deliveries be formulated as a decision problem to determine the time point at which deliveries are made to buyers in order to minimize the supplier’s average inventory. A formulation of the average inventory level (AIL) in a production cycle at the supplier’s end using a lot-for-lot policy is developed. Under the lot-for-lot policy, the scheduling of deliveries (SP) is formulated as a nonlinear programming model used to determine the first delivery point for each buyer with an objective to minimize the sum of the product of the individual demand quantity and the first delivery time for each buyer. Thus, the SP model determines not only the sequence of the first deliveries to individual buyers, but also the time when the deliveries are made. An iterative heuristic procedure (IHP) is developed to solve the SP model assuming a given sequence of buyers. Six sequence rules are considered and evaluated via simulation.     

sum from n=1 to +∞(1/n~(2m))的初等解法

本文用初等的方法研究sum from n=1 to(1/n~(2m))(m∈N)的求和问题。这个问题最先由Euler[8]解决。文献[1][6]给出了另两种求解方法。特别地,对于m=1的情形,即sum from n=1 to ∞(1/n~2)=((π~2)/6),已有许多不同的证明方法,可见文献[2][3][4][5]以及那里的参考文献。本文的想法,主要受文献[5][6]的启发而来的。     

HL—1装置汤姆逊散射测量空间两点电子温度

本文叙述用激光汤姆逊散射方法测量HL-1装置在不同放电条件下空间两点的电子温度。简要介绍了测量条件,空间两点测量的实验安排及数据获取系统等。对实验结果进行了初步分析。在适当改变等离子体边缘径向电场分布时,电子温度有明显增加。     

气体分子碰撞的模型无关分析

本文纯粹基于统计平均的思想,模型无关分析导出了气体分子的碰壁数和平均碰撞频率.