排序方式: 共有13条查询结果,搜索用时 15 毫秒
1.
研究了压电双材料界面钝裂纹附近螺型位错的屏蔽效应与发射条件.应用保角变换技术,得到了复势函数与应力场的封闭形式解,讨论了位错方位、双材料电弹常数及裂纹钝化程度对位错屏蔽效应和发射条件的影响.结果表明,Burgers矢量为正的螺型位错可以降低界面钝裂纹尖端的应力强度因子(屏蔽效应),屏蔽效应随位错方位角及位错与裂纹尖端距... 相似文献
2.
Elastic behaviour of an edge dislocation near a sharp crack emanating from a semi-elliptical blunt crack 下载免费PDF全文
The interaction between an edge dislocation and a crack
emanating from a semi-elliptic hole is dealt with. Utilizing the
complex variable method, closed form solutions are derived for
complex potentials and stress fields. The stress intensity factor at
the tip of the crack and the image force acting on the edge
dislocation are also calculated. The influence of the morphology of
the blunt crack and the position of the edge dislocation on the
shielding effect to the crack and the image force is examined in
detail. The results indicate that the shielding or anti-shielding
effect to the stress intensity factor increases acutely when the
dislocation approaches the tip of the crack. The effect of the
morphology of the blunt crack on the stress intensity factor of the
crack and the image force is very significant. 相似文献
3.
Shielding effect and emission criterion of a screw dislocation near an interfacial blunt crack 下载免费PDF全文
Shielding effect and emission criterion of a screw dislocation near
an interfacial blunt crack are dealt with in this paper. Utilizing
the conformal mapping technique, the closed-form solutions are
derived for complex potentials and stress fields due to a screw
dislocation located near the interfacial blunt crack. The stress
intensity factor on the crack tips and the critical stress intensity
factor for dislocation emission are also calculated. The influence
of the orientation of the dislocation and the morphology of the
blunt crack as well as the material elastic dissimilarity on the
shielding effect and the emission criterion is discussed in detail.
The results show that positive screw dislocations can reduce the
stress intensity factor of the interfacial blunt crack tip
(shielding effect). The shielding effect increases with the increase
of the shear modulus of the lower half-plane, but it decreases with
the increase of the dislocation azimuth angle. The critical loads at
infinity for dislocation emission increases with the increase of
emission angle and curvature radius of blunt crack tip, and the most
probable angle for screw dislocation emission is zero. The present
solutions contain previous results as special cases. 相似文献
4.
The solution of a wedge disclination dipole interacting with an annular inclusion and the force acting on the disclination dipole 下载免费PDF全文
The interaction between a wedge disclination dipole and an elastic annular inclusion is investigated. Utilizing the Muskhelishvili complex variable method, the explicit series form solutions of the complex potentials in the matrix and the inclusion region are derived. The image force acting on the disclination dipole centre is also calculated. The influence of the location of the disclination dipole and the thickness of the annular inclusion as well as the elastic dissimilarity of materials upon the equilibrium position of the disclination dipole is discussed in detail. The results show that a stable equilibrium point of the disclination dipole near the inclusion is found for certain combinations of material constant. Moreover, the force on the disclination dipole is strongly affected by the position of the disclination dipole and the thickness of annular inclusion. The repulsion force increases (or the attraction force reduces) with the increase of the thickness of the annular inclusion. An appropriate critical value of the thickness of the annular inclusion may be found to change the direction of the force on the disclination dipole. The present solutions include previous results as special eases. 相似文献
5.
It is well known that components with dissimilar compatibility factors cannot be combined by segmentation into an efficient thermoelectric generator, since each component needs a unique optimal current density. Based on the complex variable method, the thermal-electric field within a bi-layered thermoelectric composite has been analyzed, and the field distributions have been obtained in closed-form. Our analysis shows that current refraction occurs at the interface, both the refraction angle and current density vary with the incidence angle. Further analysis proves that the current densities in two components can be adjusted independently by adjusting the incidence current density and incidence angle, thus the optimal current density can be matched in both components, and the conversion efficiency can be significantly increased. These results point to a new route for high efficiency thermoelectric composites. 相似文献
6.
The effective properties of thermoelectric composites are well known to depend on boundary conditions, which causes the macro performance of thermoelectric composite to be difficult to assess. The overall macro-performance of multilayered thermoelectric medium is discussed in this paper. The analytical solutions are obtained, including the heat flux, temperature,electric potential, and the overall energy conversion efficiency. The results show that there are unique relationships between the temperature/electric potential and the electric current/energy flux in the material, and whether the material is independent of or embedded in thermoelectric composites. Besides, the Peltier effect at the interface can significantly improve the overall energy conversion efficiency of thermoelectric composites. These results provide a powerful tool to analyze the effective behaviors of thermoelectric composites. 相似文献
7.
研究了螺型位错偶极子与界面钝裂纹的干涉效应.应用保角变换技术,得到了复势函数与应力场的封闭解析解,讨论了位错偶极子方位、臂长及裂纹钝化程度对位错偶板子屏蔽效应和发射条件的影响.结果表明,与单个螺型位错不同,螺型位错偶极子与x轴夹角在一定范围内时才可以降低界面钝裂纹尖端的应力强度因子(屏蔽效应),屏蔽效应随偶板子臂长的增大而增强,随裂纹钝化程度的增大而增强,屏蔽区域也随裂纹钝化程度的增大而增大;位错偶极子发射所需的临界无穷远加载随偶极子臂长的增加而减小,随位错方位角及裂纹钝化程度的增加而增大;最可能的位错偶极子发射角度为0.螺型位错偶极子的发射比单个螺型位错的发射要困难.本文解答的特殊情况与相关文献给出的解答一致. 相似文献
8.
利用复变函数方法,研究了横观各向同性压电双材料中椭圆孔孔边界面裂纹的反平面问题.首先,利用保角变换函数将椭圆孔保角变换到一直线裂纹;其次,基于孔边及裂纹表面均电不可穿透并且自由的假设,利用Stroh公式分别得到了本问题的复势函数、裂尖场集中系数的解析表达式;最后,在面内电载荷及面外机械载荷的作用下,分析了椭圆孔尺寸、裂纹长度和外载对裂尖场集中系数的影响,并得到了一个有意义的结论:椭圆孔一边裂纹长度的改变对另一边裂纹裂尖场的影响有限,然而一旦椭圆孔退化为竖直裂纹,该影响将变得非常显著. 相似文献
9.
The model of a screw dislocation near a semi-infinite wedge crack tip inside a nano-circular inclusion is proposed to investigate the shielding effect of nano inclusions acting on cracks. Utilizing the complex function method, the closed-form solutions of the stress fields in the matrix and the inclusion region are derived. The stress intensity factor, the image force, as well as the critical loads for dislocation emission are discussed in detail. The results show that the nano inclusion not only enhances the shielding effect exerted by the dislocation, but also provides a shielding effect itself. Moreover, dislocations may be trapped in the nano inclusion even if the matrix is softer than the inclusion. This helps the dislocation shield crack, and reduces the dislocation density within the matrix. 相似文献
10.
Elastic behaviour of a wedge disclination dipole near a sharp crack emanating from a semi-elliptical blunt crack 下载免费PDF全文
The interaction between a wedge disclination dipole and a
crack emanating from a semi-elliptic hole is investigated. Utilising
the complex variable method, the closed form solutions are derived
for complex potentials and stress fields. The stress intensity
factor at the tip of the crack and the image force acting on the
disclination dipole center are also calculated. The influence of the
morphology of the blunt crack and the position of the disclination
dipole on the shielding effect to the crack and the image force is
examined in detail. The results indicate that the shielding or
anti-shielding effect to the stress intensity factor increases when
the wedge disclination dipole approaches the tip of the crack. The
effects of the morphology of the blunt crack on the stress intensity
factor of the crack and the image force are very significant. 相似文献