IFN-alpha1,8 inhibits tumor-induced angiogenesis in murine angiosarcomas.

Interferon-alpha (IFN-alpha) has proved effective in the treatment of hemangiomas, hemangioblastomas, and Kaposi's sarcoma. To investigate the ability of IFNs to inhibit angiosarcoma, we used two transformed murine endothelial cell lines that form angiosarcomas in vivo. SVR and MS1-VEGF cell lines express oncogenic H-ras or vascular endothelial growth factor (VEGF), respectively. IFN-alpha1,8, which is active against murine and human cells, inhibited SVR and MS1-VEGF proliferation in vitro by 40% at 10(3) U/mL (p = 0.028). In vivo, IFN-alpha1,8 inhibited SVR tumor volume by 71% (p = 0.047) and MS1-VEGF volume by 79% (p = 0.003). Tumor-induced angiogenesis was decreased in SVR tumors by 52% (p = 0.005) and in MS1-VEGF tumors by 58% (p = 0.001). Sera from IFN-alpha1,8-treated mice bearing either SVR or MS1-VEGF tumors demonstrated a 5-fold increase in IP-10/CXCL10 (p = 0.001), an IFN-induced antiangiogenic protein. Both recombinant IP-10 and IFN-alpha1,8 inhibited human umbilical vein endothelial cell (HUVEC) vessel formation in the fibrin gel assay, a three-dimensional culture model of angiogenesis, by 56% at 25 ng/mL and 50% at 1.2 ng/mL, respectively (p < 0.001). An IP-10 blocking antibody restored vessel formation to 80% of untreated controls (p = 0.001). Given the magnitude of the in vivo response, these data suggested that the antitumor effects of IFN-alpha1,8 were likely mediated through angiogenesis inhibition rather than solely by direct inhibition of tumor cell proliferation.     

The effect of palytoxin on neuromuscular junctions in the anococcygeus muscle of the rat

Palytoxin, a highly toxic natural product isolated from zoanthids of the genus Palythoa, is accumulated by a wide range of fishes and marine invertebrates used as food in the Indo-Pacific. It is responsible for many incidents of human morbidity and mortality. The toxin is a potent smooth muscle spasmogen. The cause of the contraction of smooth muscle is unclear, but recent work strongly suggests that it is primarily initiated by the release of neurotransmitters from the motor innervation of the smooth muscle. We show here that palytoxin caused the swelling of the muscle cells and some internal organelles of the anococcygeus muscle of the rat, but no substantial structural damage to the tissue. Axons and Schwann cells were also swollen but the most dramatic feature was the depletion of synaptic vesicles from putative release sites in the axons. Some axons were physically damaged following exposure to the toxin, but this was relatively uncommon (<10% of all axons studied). In the majority of axons there was no damage to nerve terminal membranes, but there was damage to mitochondria. The depletion of vesicles involved all types – clear, dense-cored, large and small. Our observations and pharmacological data gathered elsewhere, provide a neuropathological basis for the spasmogenic activity of palytoxin.     

Probable gas embolism during operative hysteroscopy caused by products of combustion

PURPOSE: Gas embolism is a rare but well documented entity during operative hysteroscopy, with an incidence of 10-50%. Catastrophic outcomes occur at a rate of three in 17,000 procedures. The purpose of this report is to present a non-fatal case of gas embolism probably caused by the gaseous products of combustion. CLINICAL FEATURES: A 50-yr-old woman with a history of menorrhagia was scheduled for hysteroscopy and endometrial ablation and polypectomy. Fifteen minutes into the procedure, with the patient in lithotomy position, 20 degree head down tilt, and breathing spontaneously, a sudden oxygen desaturation occurred from 97% to 87%. The patient's end-tidal carbon dioxide dropped from 46 mmHg to 27 mmHg. The patient's breathing pattern remained normal, respiratory rate remained 11-12 breaths x min(-1) but amplitude of the reservoir bag movement was increased. Cardiovascular variables remained stable. She responded rapidly to 100% oxygen and made an uneventful recovery. Having ruled out other possible causes, we concluded gas embolism was responsible for the fall in oxygen saturation and end-tidal CO(2). CONCLUSION: With all the precautions in place to minimize the likelihood of fluid overload and ambient air embolism occurring, we surmised that products of combustion were the cause of the gas embolism. During endometrial ablation, gaseous products of combustion, mainly carbon dioxide, accumulate. The gases may then contribute to the rise in uterine pressure that occurs as irrigation fluid enters the uterus and this rise in pressure in turn encourages passage of gas into the open venous sinuses.     

Screw angulation affects bone-screw stresses and bone graft load sharing in anterior cervical corpectomy fusion with a rigid screw-plate construct: a finite element model study

Background contextAnterior corpectomy and reconstruction with bone graft and a rigid screw-plate construct is an established procedure for treatment of cervical neural compression. Despite its reliability in relieving symptoms, there is a high rate of construct failure, especially in multilevel cases.PurposeThere has been no study evaluating the biomechanical effects of screw angulation on construct stability; this study investigates the C4–C7 construct stability and load-sharing properties among varying screw angulations in a rigid plate-screw construct.Study designA finite element model of a two-level cervical corpectomy with static anterior cervical plate.MethodsA three-dimensional finite element (FE) model of an intact C3–T1 segment was developed and validated. From this intact model, a fusion model (two-level [C5, C6] anterior corpectomy) was developed and validated. After corpectomy, allograft interbody fusion with a rigid anterior screw-plate construct was created from C4 to C7. Five additional FE models were developed from the fusion model corresponding to five different combinations of screw angulations within the vertebral bodies (C4, C7): (0°, 0°), (5°, 5°), (10°, 10°), (15°, 15°), and (15°, 0°). The fifth fusion model was termed as a hybrid fusion model.ResultsThe stability of a two-level corpectomy reconstruction is not dependent on the position of the screws. Despite the locked screw-plate interface, some degree of load sharing is transmitted to the graft. The load seen by the graft and the shear stress at the bone-screw junction is dependent on the angle of the screws with respect to the end plate. Higher stresses are seen at more divergent angles, particularly at the lower level of the construct.ConclusionThis study suggests that screw divergence from the end plates not only increases load transmission to the graft but also predisposes the screws to higher shear forces after corpectomy reconstruction. In particular, the inferior screw demonstrated larger stress than the upper-level screws. In the proposed hybrid fusion model, lower stresses on the bone graft, end plates, and bone-screw interface were recorded, inferring lower construct failure (end-plate fractures and screw pullout) potential at the inferior construct end.     

Linear and angular measurements of computer-generated models: are they accurate, valid, and reliable?

INTRODUCTION: Traditional advanced imaging modalities such as CT and MRI are limited in their ability to perform accurate linear distance and angular measurements regardless of anatomical orientation. The construction of 3D models has been used to perform anthropometric analyses as well as in the reconstruction of rapid prototypes. We hypothesized that such measurements would be precise to within 2 mm or 2 degrees of measurements performed with a coordinate measurement machine (CMM). We also hypothesized that there would be a high degree of interobserver reliability with these measurements. MATERIALS AND METHODS: Multiple aluminum screws were implanted in various positions in three foam pelvises which were subsequently scanned by CT and rendered as 3D models using a commercially available software package (Mimics). Linear and angular measurements were performed using a CMM machine, the software package, and a dial caliper or goniometer. The deviation of the measurements from the CMM data was compared using ANOVA. The interobserver reliability of both the manual and computer-generated measurements was calculated. RESULTS: The mean difference between the CMM distances and those measured manually and with the software was 2.12 +/- 1.20 mm and 1.57 +/- 1.05 mm, respectively. The mean difference between the CMM angular measurements and the angular measurements performed manually and with the software was 4.07 +/- 4.70 degrees and 1.62 +/- 1.32 degrees, respectively. In all cases, the manual measurements were significantly less accurate (p < 0.0001) and there was a high degree of interobserver reliability. CONCLUSIONS: Computer-generated measurements taken from three-dimensionally reconstructed models are more accurate than manual measurements and are within 2 mm and 2 degrees of measurements performed with a CMM. These measurements have high interobserver reliability.