Controlled Creating of Cracks in Concrete for Non-destructive Testing

The non-destructive assessment of cracks in concrete is a common task for which non-destructive evaluation solutions have been published. Primarily, these tests have been carried out on artificial cracks that have been created by using notches instead of natural cracks. This study evaluates a procedure designed to create reproducible and controlled cracks in concrete. The procedure is based on using expanding mortar in a series of blind holes. This is done in combination with carefully aligned reinforcement to guide the direction of the crack development. The depth of the crack is also controlled by reinforcement. Crack depth varies statistically in the range of the maximum aggregate size (16 mm) used for concrete.     

Model-based prognostics of gear health using stochastic dynamical models

In this paper we present a statistical approach to estimating the time in which an operating gear will reach a critical stage. The approach relies on measured vibration signals. From these signals features are first extracted and then their evolution over time is predicted. This is done based on a dynamic model that relates hidden degradation phenomena to measured outputs. The Expectation-Maximization algorithm is used to estimate the parameters of the underlying state-space model on line. The time to reach the safety alarm threshold is determined by estimating the distribution of the remaining useful life using the estimated linear model. The results obtained on a pilot test bed are presented.     

SurgeryCuts: Embedding Additional Information in Maps without Occluding Features

Visualizing contextual information to a map often comes at the expense of overplotting issues. Especially for use cases with relevant map features in the immediate vicinity of an information to add, occlusion of the relevant map context should be avoided. We present SurgeryCuts, a map manipulation technique for the creation of additional canvas area for contextual visualizations on maps. SurgeryCuts is occlusion‐free and does not shift, zoom or alter the map viewport. Instead, relevant parts of the map can be cut apart. The affected area is controlledly distorted using a parameterizable warping function fading out the map distortion depending on the distance to the cut. We define extended metrics for our approach and compare to related approaches. As well, we demonstrate the applicability of our approach at the example of tangible use cases and a comparative user study.     

A method for closed-loop identification of Nyquist curve in three quadrants

This paper proposes a generalization of Ziegler–Nichols' (ZN) experiment that allows the closed-loop identification of Nyquist curve of a linear plant in three quadrants. As in the standard ZN method, no extra equipment is needed. Moreover, sustained undamped oscillations in the plant are not required, since the identification may be accomplished with damped oscillations only. The plant may even be unstable, assuming the used controller is able to stabilize the plant.     

Single-step preparation of rutile-type CrNbO4 and CrTaO4 oxides from oxalate precursors–characterization and properties

Chromium niobate and tantalate (CrNbO₄ and CrTaO₄) were synthesized by pyrolysis of the oxalate-based heterometallic complexes [Cr₂(bpy)₄(μ-O)₄Nb₂(C₂O₄)₄]·3H₂O (Cr-Nb) and [Cr(bpy)₂(H₂O)(μ-O)Ta(C₂O₄)₃]₂·3.5H₂O (Cr-Ta) (bpy = 2,2'-bipyridine). Compared to conventional solid-state synthesis, herein studied oxides are prepared at lower temperatures, in one step without repeating grinding procedures. The structure, morphology, and optical properties of the as-synthesized oxides were characterized using powder X-ray diffraction (PXRD), field emission scanning electron microscopy (SEM), the thermogravimetric and differential thermal analysis (TG/DTA) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The determined band gap energies of CrNbO₄ and CrTaO₄ are 2.39 and 2.82 eV, respectively, which prompted us to investigate photocatalytic activity of these oxides in degradation of dyes. Microscopy studies show that the particles of both oxides began to aggregate into bigger particles, leading to an increase in grain size. Additionally, magnetization measurements on both oxides revealed spin-glass behavior at low temperatures.     

Biomimetic Zirconia with Cactus-Inspired Meso-Scale Spikes and Nano-Trabeculae for Enhanced Bone Integration

Biomimetic design provides novel opportunities for enhancing and functionalizing biomaterials. Here we created a zirconia surface with cactus-inspired meso-scale spikes and bone-inspired nano-scale trabecular architecture and examined its biological activity in bone generation and integration. Crisscrossing laser etching successfully engraved 60 μm wide, cactus-inspired spikes on yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) with 200–300 nm trabecular bone-inspired interwoven structures on the entire surface. The height of the spikes was varied from 20 to 80 μm for optimization. Average roughness (Sa) increased from 0.10 μm (polished smooth surface) to 18.14 μm (80 μm-high spikes), while the surface area increased by up to 4.43 times. The measured dimensions of the spikes almost perfectly correlated with their estimated dimensions (R² = 0.998). The dimensional error of forming the architecture was 1% as a coefficient of variation. Bone marrow-derived osteoblasts were cultured on a polished surface and on meso- and nano-scale hybrid textured surfaces with different spike heights. The osteoblastic differentiation was significantly promoted on the hybrid-textured surfaces compared with the polished surface, and among them the hybrid-textured surface with 40 μm-high spikes showed unparalleled performance. In vivo bone-implant integration also peaked when the hybrid-textured surface had 40 μm-high spikes. The relationships between the spike height and measures of osteoblast differentiation and the strength of bone and implant integration were non-linear. The controllable creation of meso- and nano-scale hybrid biomimetic surfaces established in this study may provide a novel technological platform and design strategy for future development of biomaterial surfaces to improve bone integration and regeneration.     

Spray-dried nanoparticle-loaded pectin microspheres for dexamethasone nasal delivery

Abstract

In this study, we present the development of an innovative dry powder dexamethasone (Dex) nasal delivery system comprising Dex-loaded lipid/alginate nanoparticles incorporated within pectin microspheres (Dex/NPs-loaded pectin microspheres; DNM). DNM microspheres were characterized by the mean diameter of 2.76?±?0.10?µm, zeta-potential of –36.2?±?1.1?mV, and drug loading of 3.3?±?0.3%. The morphology study revealed irregular microsphere surface forming external voids. In contact with simulated nasal fluid, DNM microspheres demonstrated desirable property of moderate swelling and ensured stronger mucoadhesion compared with conventional Dex-loaded pectin microspheres. The strategy of Dex incorporation within the lipid/alginate NPs resulted in prolonged Dex release in relation to Dex being directly entrapped within the conventional pectin microspheres. DNM microspheres showed excellent biocompatibility and rendered Dex permeation across the selected epithelial cell model similar to that of Dex solution. In conclusion, balanced biopharmaceutical properties of the proposed nasal Dex delivery system provides the potential for prolonged contact time with nasal mucosa, prolonged therapeutic effect, and improved patient compliance.