钨掺杂二氧化钛可见光催化剂低温合成及性能研究

采用低温一步法合成了钨掺杂的二氧化钛,并用X射线衍射(XRD)、红外光谱(IR)、紫外可见漫反射光谱(UV-Vis)等方法对其结构进行了表征.发现掺杂钨的二氧化钛为锐钛矿型晶型,且在可见光区有明显的吸收.以苯酚的光催化氧化降解反应为探针,研究了催化剂的光催化性能.结果表明,本方法合成的钨掺杂的二氧化钛具有理想的可见光催化活性.     

交通诱导室外LED显示屏有关问题之浅见

本文探讨了智能交通系统中交通诱导室外LED显示屏的使用功能,对交通诱导室外LED显示屏在实际应用中的有关问题发表了认识和看法。     

纳米技术在生物传感器中的应用

介绍了纳米技术在生物传感器中的应用，重点阐述当前发展方向的前沿。     

高压水射流射孔井眼应力数值模拟研究

水力射孔技术是一种新型完井方式,利用深穿透水力射孔技术辅助定向压裂,可实现油层改造和油井增产。考虑套管水泥环的影响,采用有限元理论结合ANSYS软件计算了高压水射流水力射孔井眼周围的应力,重点分析了水力射孔参数对井周应力的影响规律,初步研究了直井水力压裂时水力射孔对裂缝起裂的影响。计算结果表明,沿最大水平地应力方向布孔时,孔眼根部的周向拉应力最大,裂缝将会在孔眼根部起裂;选择合理水力射孔参数可有效降低地层破裂压力。研究结果可为高压水射流水力射孔辅助定向压裂提供参数优选的依据。     

IF板与08Al板的成形性能研究

通过模拟成形性试验，对新型超深冲用IF钢板和传统冲压用08Al钢板的冲压成形性能进行了研究．结果表明：IF板的拉深性能、扩孔性能、胀形性能以及“拉深-胀形”复合性能等均优于08Al板，其中，扩孔性能和平面各向异性的改善最为显著；各项试验中，IF板的成形力普遍小于08Al板。     

美孚油回收利用的可行性实验研究

本文针对美孚油回收液与兰炼8#油混合利用进行可行性实验研究，经过重度、粘度、可燃性等方面的实验研究，表明美孚油回收液与兰炼8#油混合可以用在电动轮上并且获得良好的效果。     

Numerical Simulation of Thermal Stress Fields in the Magnetic Quenching Process of 45 Steel

Based on a transient temperature distribution of a 45 steel cylinder workpiece during magnetic quenching, which was obtainedby solving the governing equations with nonlinear boundary on the condition of coupling effects of heat-magnetism. Accordingto the     

核壳型铁钴纳米复合材料的制备及其性能

采用多元醇还原工艺和自组装技术,在微米级Fe粉表面包覆纳米Co粒子,一步法制备了一种具有核壳结构的复合磁性微球,用SEM表征了其相组成和形貌,用VSM测试了磁滞回线,初步研究了磁学性能。结果表明:用该法制备的核壳型Fe/Co纳米复合材料表面包覆致密,其比饱和磁化强度和矫顽力介于微米铁粉和纳米钴粉之间。     

COLOR VISION SYSTEM FOR RIPENESS INSPECTION OF OIL PALM ELAEIS GUINEENSIS

In checking harvesting discipline and quality control for oil palm fruits, color has presumably been an important guide to whether the oil content has reached a maximum where the fruit bunch is ready for cutting. However, establishing a single and harmonious standard base on color is a very contentious issue in the oil palm industry because of the subjective nature of the human vision of color. This was further complicated due to the lack of information on fruit color upon which to base a definite ripeness criterion. We demonstrated in this paper that this problem can be solved using machine vision technology. Methods used were to treat color in HSI (Hue, Saturation and Intensity) color space and applied multivariate discriminant analysis. These have proven to be highly effective for color evaluation and image processing. The vision system was trained to classify oil palms into four quality grades according to PORIM (Palm Oil Research Institute of Malaysia) inspection standards. These are the unripe, the underripe, the optimally ripe and the overripe classes. Depending upon the quality feature evaluated, misclassification by the vision system varied from 5 to 12% but averaged at about 8%. Machine vision disagreement ranged from 2 to 19%.     

非晶Sm5Fe74.3Nb1.5Si11.7B4.5C2.5Cu0.5合金经预退火后的晶化动力学的DTA研究

研究了非晶Sm5Fe74.3Nb1.5Si11.7B4.5C2.5Cu0.5合金经400℃，保温10min预退火后的晶化动力学。结果表明；该合金的晶化相为α-Fe固溶体和Sm2Fe17Cx金属间化合物，两相的晶化表观激活能分别为557KJ/mol和514KJ/mol，当晶化体积分数为60%时，α-Fe相的晶化激活能达极大值；Sm2Fe17Cx相晶化激活能则随其晶化体积分数的增加而逐渐减小。