Temporary leukocyte depletion reduces ventricular dysfunction during prolonged postischemic reperfusion

Leukocyte depletion improves early postischemic ventricular performance in neonatal models of global myocardial ischemia. However, the rate of leukocyte reaccumulation after cardiopulmonary bypass and its subsequent impact on myocardial function is not known. This laboratory study examined the effect of leukocyte depletion on myocardial performance during the initial 6-hour period after bypass in an in situ, in vivo porcine model of neonatal cardiac surgery. Fifteen 3- to 5-day-old piglets (eight control and seven leukocyte depleted animals) were instrumented by placement of left ventricular short-axis sonomicrometry crystals and an intraventricular micromanometer catheter. Mechanical leukocyte depletion was achieved with Pall RC100 filters (Pall Biomedical, Inc., Fajardo, Puerto Rico) in the cardiopulmonary bypass circuit. Neonatal hearts were subjected to 90 minutes of hypothermic ischemia after a single dose of cold crystalloid cardioplegia. Two control animals died after the operation and were excluded from data analysis. Leukocyte filtration reduced the granulocyte count during initial myocardial reperfusion to 0.8% of control values. However, circulating granulocyte counts increased in leukocyte depleted animals throughout the postoperative period, reaching 68% of control values by 6 hours. Despite this rapid return of circulating granulocytes, animals subjected to leukocyte depletion had significantly better preservation of left ventricular performance (measured by preload recruitable stroke work, p < or = 0.02), left ventricular systolic function (measured by end-systolic pressure-volume relationship, p < or = 0.05), and ventricular compliance (p < or = 0.04) during the experiment. These changes in ventricular function were associated with a significant increase in left ventricular water content (p < or = 0.02) and tissue myeloperoxidase activity (p < or = 0.005) in control animals compared with leukocyte depleted animals. This study demonstrates that leukocyte depletion during initial reperfusion results in sustained improvement in postischemic left ventricular function despite the rapid return of granulocytes to the circulation.     

Trends in low-cost, high-performance substrate technology

The trends in high density interconnection (HDI) multichip module (MCM) techniques that have the potential to reduce interconnection cost and production time are described. The implementation in laminated dielectric (MCM-L) technology of a workstation processor core illustrates current substrate technology capabilities. The design, routing, layout and thermal management of the processor core are described. Thin-film deposited dielectric (MCM-D) technology is discussed as a cost-effective method for future interconnection applications     

The virtual reality modeling language explained

VRML stands for Virtual Reality Modeling Language. Technically, VRML is neither virtual reality nor a modeling language. Virtual reality generally implies an immersive 3D experience, which typically requires a head mounted display (HMD) and 3D input devices, such as digital gloves. VRML neither requires nor imposes immersion. Furthermore, a true modeling language would contain richer geometric modeling primitives and mechanisms. VRML provides a bare minimum of geometric modeling features but contains numerous features unavailable in a modeling language. If VRML is not virtual reality or a modeling language, what is it? This question has several answers. At its core, VRML serves as a 3D interchange format. It defines most of the commonly used semantics found in today's 3D applications such as hierarchical transformations, light sources, viewpoints, geometry, animation, fog, material properties, and texture mapping. Here's a second answer to: what is VRML? It's a 3D analog to HTML. This means that VRML serves as a simple, multiplatform language for publishing 3D Web pages. The fact that some information, including games, engineering models, scientific visualizations, educational experiences, and architecture, can best be experienced in 3D has motivated this language. Typically, these types of projects require intensive interaction, animation, and user participation and exploration beyond what a page, text, or image based format can handle. Another answer is that VRML provides the technology to integrate 3D, 2D, text, and multimedia into a coherent model     

Genetic mapping of a major susceptibility locus for juvenile myoclonic epilepsy on chromosome 15q

The epilepsies are a group of disorders characterised by recurrent seizures caused by episodes of abnormal neuronal hyperexcitability involving the brain. Up to 60 million people are affected worldwide and genetic factors may contribute to the aetiology in up to 40% of patients. The most common human genetic epilepsies display a complex pattern of inheritance. These are categorised as idiopathic in the absence of detectable structural or metabolic abnormalities. Juvenile myoclonic epilepsy (JME) is a distinctive and common variety of familial idiopathic generalised epilepsy (IGE) with a prevalence of 0.5-1.0 per 1000 and a ratio of sibling risk to population prevalence (lambda(s)) of 42. The molecular genetic basis of these familial idiopathic epilepsies is entirely unknown, but a mutation in the gene CHRNA4, encoding the alpha4 subunit of the neuronal nicotinic acetylcholine receptor (nAChR), was recently identified in a rare Mendelian variety of idiopathic epilepsy. Chromosomal regions harbouring genes for nAChR subunits were therefore tested for linkage to the JME trait in 34 pedigrees. Significant evidence for linkage with heterogeneity was found to polymorphic loci encompassing the region in which the gene encoding the alpha7 subunit of nAChR (CHRNA7) maps on chromosome 15q14 (HLOD = 4.4 at alpha = 0.65; Z(all) = 2.94, P = 0.0005). This major locus contributes to genetic susceptibility to JME in a majority of the families studied.     

Seeking the truth about ad hoc join costs

In this paper, we re-examine the results of prior work on methods for computing ad hoc joins. We develop a detailed cost model for predicting join algorithm performance, and we use the model to develop cost formulas for the major ad hoc join methods found in the relational database literature. We show that various pieces of “common wisdom” about join algorithm performance fail to hold up when analyzed carefully, and we use our detailed cost model to derive op timal buffer allocation schemes for each of the join methods examined here. We show that optimizing their buffer allocations can lead to large performance improvements, e.g., as much as a 400% improvement in some cases. We also validate our cost model's predictions by measuring an actual implementation of each join algorithm considered. The results of this work should be directly useful to implementors of relational query optimizers and query processing systems. Edited by M. Adiba. Received May 1993 / Accepted April 1996     

Motion Planning for Redundant Manipulators Using a Floating Point Genetic Algorithm

This paper deals with the trajectory planning problem for redundant manipulators. A genetic algorithm (GA) using a floating point representation is proposed to search for the optimal end-effector trajectory for a redundant manipulator. An evaluation function is defined based on multiple criteria, including the total displacement of the end-effector, the total angular displacement of all the joints, as well as the uniformity of Cartesian and joint space velocities. These criteria result in minimized, smooth end-effector motions. Simulations are carried out for path planning in free space and in a workspace with obstacles. Results demonstrate the effectiveness and capability of the proposed method in generating optimized collision-free trajectories.     

移动终端软件的成功要素

移动终端是一种采用先进通信协议栈的复杂系统,它需要具有与许多网络供应商设备的互操作性、支持先进而丰富的多媒体应用程序,而且,所有这些都必需在一个资源有限的嵌入式系统的约束条件下实现。提供一个满足上述要求的软件解决方案需要考虑许多方面的问题并经历诸多阶段。成功的要素是:平台质量、应用程序集成质量和产品质量。平台质量能让制造商用来生成多种设计方案的移动手机参考设计,必须提供一个用于制造高品质终端用户产品的优质平台。移动手机软件包括三个关键部分——协议栈、应用程序架构和应用程序。协议栈毫无疑问是最为复杂的…     

The spatial economics of geothermal district energy in a small, low-density town: a case study of Mammoth Lakes, California

This research focuses on the spatial economics of geothermal district energy (DE) systems that distribute hot fluids through a pipeline network to multiple thermal customers. We argue here that DE is held back by uncertainty about its economic feasibility when implemented in real places. DE works best with high urban densities, but in the US the best geothermal resources are in the less-populated west. Economic geography theory suggests that the optimal size of a DE firm's service area should depend on the trade-off between the economies of scale inherent in a large service area and the greater network development costs and heat loss involved in serving a large area. The HEATMAP© software program developed by Washington State University was used to study the feasibility of numerous scenarios for a proposed DE system in Mammoth Lakes, California. Results indicate that the core area of the town is large enough, dense enough, and in close enough proximity to the resource for profitable DE development. Proposed ski village developments would increase the thermal load density and significantly enhance its ability to remain competitive with other fuels, even in pessimistic sensitivity analyses regarding geothermal heat input costs, public participation, and retro-fitting costs.