In vitro evaluation and in vivo performance of lyophilized gliclazide

Enhancement of the dissolution rate of the poorly water-soluble hypoglycemic agent, gliclazide, by the aid of lyophilization was investigated. Mannitol, sodium lauryl sulfate (SLS) and polyvinyl pyrrolidone (PVP-k-30) were employed in different weight ratios (43%, 56% and 64% w/w, respectively) as water-soluble excipients in the formulation. Lyophilized systems were found to exhibit extremely higher in vitro dissolution rate compared to the unprocessed drug powder. Solid state characterization of the lyophilized systems using X-ray powder diffraction, Fourier transform infrared spectroscopy and differential scanning calorimetry techniques revealed that dissolution enhancement was attributable to transformation of gliclazide from the crystalline to an amorphous state in the solid dispersion formed during the lyophilization process. The gastrointestinal absorption and hypoglycemic effect of the lyophilized gliclazide/SLS system were investigated following oral administration to Albino rabbits. C_max and area under the plasma concentration–time curve of gliclazide (AUC_0–12) after administration of the lyophilized formulations were significantly higher than those obtained after administration of the unprocessed gliclazide.     

TQM implementation in hospitals

This paper discusses the essential elements for successful Total Quality Management (TQM) implementation in hospital, and the challenges that occur with such implementation. Guidelines for this implementation are provided to show how TQM tools can be used effectively in hospitals.     

Effect of the addition of Fe2O3 and heat treatment duration on the magnetic susceptibility of V2O5-P2O5-B2O3 glass system

The effect of the addition of Fe₂O₃ and heat treatment duration on the magnetic susceptibility of vanadium borophosphate glass were studied. The magnetic susceptibility of glass samples was found to increase with increasing Fe₂O₃ content, which may be explained by the formation of the FeO₆ group and the change of Fe²⁺ to Fe³⁺ which has higher paramagnetic properties. No detectable changes in the magnetic susceptibility with heat treatment for the samples containing 0.0, 0.5 and 1.0 mol% Fe₂O₃ was observed. The magnetic susceptibility for the heat treated samples containing 2.5, 5.0 and 7.5 mol% Fe₂O₃ decreases sharply with increasing duration of heat treatment up to 6 h and then remains almost constant. The sharp decrease in magnetic susceptibility of 2.5 mol% Fe₂O₃ is attributed to the increase in the number of ferrous ions. The sharp decrease for samples containing 5.0 and 7.5 mol% Fe₂O₃ is attributed to the increase in the number of Fe³⁺ in tetrahedral co-ordination. The rate of crystallization owing to the heat treatment was calculated and was found to increase with increasing iron oxide content. The geometry of crystallization was found to be in three-, two-and one-dimension(s) for samples containing 2.5, 5.0 and 7.5 mol% Fe₂O₃, respectively.     

Effect of chlormequat and alar on some biochemical constituents in tomato plants and fruits

The field experiment was conducted to study the effect of various levels of chlormequat (CCC) and alar on the biochemical changes in tomato plants and fruits at different stages of growth. This experiment included spraying with chlormequat and alar separately in two equal doses (250, 500 and 1000 ppm CCC or alar 25 and 40 days after transplanting). The different levels of chlormequat decreased the accumulation of dry matter in tomato plants, but alar increased it. Chlorophyll a, b, total chlorophyll and carotenoids content of tomato plants increased by the application of CCC or alar. The highest increase of concentration of chlorophyll a, b and carotenoids in tomato plants were found by spraying with 500 ppm alar or CCC. The application of CCC and alar declined the percentage of carbohydrates and the highest decrease resulted by adding of 1000 ppm alar or CCC. Alar caused an increase in the percentage of total nitrogen at the different stages of growth. The concentration of P, K, Ca and Mg increased by the foliar spray of all treatments. Alar application at all used levels significantly increased the yield and also the weight of fruits. Highest plant productivity was obtained by using alar and CCC at 250 ppm, followed by 500 ppm. However, the highest concentration (1000 ppm) depressed the plant productivity. The concentration of juice, total soluble solids and vitamin C in tomato fruits increased at most of the levels added. But the percentage of total sugars and total acidity seemed to exert another trend. The highest concentration of N, P, K, Ca and Mg in fruits was obtained by foliar application of 500 ppm CCC or alar.     

Thermal characteristics of packed bed storage system

The thermal behaviour of a packed bed storage system charged with hot air is modelled using two partial differential equations representing the energy conservation in the air and solid phases constituting the bed. These two equations are coupled through the heat exchange process between the two phases. A fully implicit numerical scheme based on forward, upwind and central differencing for the time, first and second space derivatives, respectively, is used to solve the modelling equations. Marching technique is used for the air equation and a tri-diagonal matrix solver is employed to solve the solid equation. The solution yields the thermal structure of the bed, namely the air and solid temperature distribution inside the bed at any particular time, and the variation of total energy stored in the bed with time. The effect of bed length, solid diameter and void fraction on the thermal characteristics of the packed bed is studied. Further, the performance of the bed under variable inlet air temperature and mass flow rate is investigated.     

Leaching kinetics of Cs and Co radionuclides fixed in cement and cement-based materials

Leach characteristics of ¹³⁷Cs and ⁶⁰Co radionuclides from both ordinary Portland cement and cement mixed with two different ratios of silica fume and ilmenite have been studied using International Atomic Energy's (IAEA) standard leach method. A mathematical model has been simulated to predict the release rate of each nuclide from cubic geometry waste matrix and the predicted values are discussed in relation to experimentally observed leach rates to confirm the validity of the proposed mechanism in the model. The effect of temperature on the radionuclides leaching rates was also studied and the effective diffusion coefficients were obtained at different temperatures. The net fractional release of the two radionuclides from different waste forms showed a decreasing pattern as ¹³⁷Cs>⁶⁰Co, indicating the largest diffusion coefficient for cesium in all waste matrices.     

Arylidene polymers. XVIII. Synthesis and thermal behavior of organometallic arylidene polyesters containing ferrocene derivatives in the main chain

A new interesting category of organometallic polyesters based on diarylidenecycloalkanones containing ferrocene derivatives in the polymer main chain has been prepared by interfacial polycondensation of 1,1′-dichlorocarbonyl ferrocene or 1,1′-dichlorocarbonyl-4,4′-diiodoferrocene with 2,5-bis(p-hydroxybenzylidene)cyclopentanone, 2,5-divanillylidenecyclopentanone, 2,6-bis(p-hydroxybenzylidene)cyclohexanone, 2,6-divanillylidenecyclohexanone, and 2,7-bis(p-hydroxybenzylidene) cycloheptanone. The resulting polyesters were characterized by elemental analyses, infrared spectroscopy, solubility, and viscometry measurements. The thermal behavior of the synthesized polymers was evaluated by thermal gravimetric analysis and correlated with their structures. The crystallinity of all polymers were examined by x-ray diffraction analysis. Moreover, the electrical conductivity of a selected example of polymer was investigated above the temperature range (300–500 K) and showed that it followed an Arrhenius-type equation with activation energy 2.09 eV. © 1993 John Wiley & Sons, Inc.     

THE ESTIMATION AND PREDICTION OF SUBSET BILINEAR TIME SERIES MODELS WITH APPLICATIONS

Abstract. In this paper we define subset bilinear time series models, and then describe an algorithm for the estimation of these models. It is also pointed out that for this class of non-linear time series models, it is possible to obtain optimal several step predictors. The estimation technique of these models is illustrated with respect to three time series, and the optimal several steps ahead forecasts of these time series models are calculated. A comparison of these forecasts is made with the forecasts obtained by the best linear autoregressive and threshold autoregressive models. The residuals obtained from the models are tested for independence and Gaussianity using higher order moments.     

Morphology and microstructure of autoclaved clinker and slag-lime pastes in presence and in absence of silica sand

Development of microstructure in four hydrothermal reactions has been undertaken using scanning electron microscopy. These are clinker, clinker-sand, slag-lime and slag-lime-sand hydrothermal reactions. The microstructure of clinker hydration products displayed crumpled foils and tabular masses of calcium silicate hydrates; few cubic crystals of hydrogarnet appeared only during the initial stage of the reaction. In clinker-sand mixture the C-S-H phase was the only product identified. In slag-lime hydration the microstructure displayed both of the hydrogarnet crystals and the C-S-H phase. The hydration of slag-lime-sand mixture (an optimum composition) was associated with the formation of ill-crystallized tobermorite and crystalline 11A tobermorite as the main products.