Coating of carbon-fiber surface by silicon carbide via sol-gel mixtures of tetraethyl orthosilicate and phenolic resin

The preparation of a SiC coating on a carbon fiber surface using a sol-gel mixture of tetraethyl orthosilicat (TEOS) and phenolic resin was studied. FTIR and SEM investigations indicated that the SiC coating can be formed by carbothermal reduction of the sol-gel mixture at 1420°C for 15–20 min in an argon atmosphere. TGA of the coated fiber was also performed, showing that the SiC coating improves the thermooxidative stability of the carbon fiber. With the thickness of the obtained coating of 0.47 μm using a C/Si ratio of 4, this treatment does not affect the carbon fiber strength.     

Curing kinetics and mechanical properties of epoxy nanocomposites based on different organoclays

The effect of different organoclays and mixing methods on the cure kinetics and properties of epoxy nanocomposites based on Epon828 and Epicure3046 was studied. The two kinds of organoclay used in this study, both based on natural montmorillonite but differing in intercalant chemistry, were I.30E (Nanomer I.30E—treated with a long‐chain primary amine intercalant) and C.30B (Cloisite 30B—treated with a quaternary ammonium intercalant, less reactive with epoxy than the primary amine). The two mixing processes used to prepare the nanocomposites were (i) a room‐temperature process, in which the clay and epoxy are mixed at room temperature, and (ii) a high‐temperature process, in which the clay and epoxy are mixed at 120°C for 1 h by means of mechanical mixing. The nanocomposites were cured at room temperature and at high temperature. The quality of dispersion and intercalation/exfoliation were analyzed by scanning electron microscopy, transmission electron microscopy, and X‐ray diffraction. The heat evolution of the epoxy resin formulation and its nanocomposite systems was measured using differential scanning calorimetry at different heating rates of 2.5, 5, 10, 15, and 20°C min^?1. The cure kinetics of these systems was modeled by means of different approaches. Kissinger and isoconversional models were used to calculate the kinetics parameters while the Avrami model was utilized to compare the cure behavior of the epoxy systems. The cure kinetics and mechanical properties were found to be influenced by the presence of nanoclay, by the type of intercalant, and by the mixing method. POLYM. ENG. SCI., 47:649–661, 2007. © 2007 Society of Plastics Engineers.     

Extra back-off flow control in multi-hop wireless networks

CSMA is the predominant distributed access protocol for wireless mesh networks. Originally designed for single-hop settings, CSMA can exhibit severe performance problems in multi-hop networks in terms of stability and end-to-end throughput. To ensure a smoother flow of packets, we examine an enhancement referred to as Extra Back-off (EB) flow control. In this enhanced scheme a node remains silent for a certain extra back-off time (imposed on top of the usual back-off time that is part of CSMA) after it has transmitted a packet, to give both the downstream and upstream neighbors the opportunity to transmit. EB flow control entails only a small modification to CSMA, preserving its distributed character. In order to examine the performance of EB flow control, we analyze a novel class of Markov models at the interface between classical tandem queues and interacting particle systems. The results demonstrate that EB flow control provides an effective mechanism for improving the end-to-end throughput performance.     

Film thickness in point contacts under generalized Newtonian EHL conditions: Numerical and experimental analysis

The current paper contributes to the understanding of the behaviour of a smooth point EHL contact with a generalized Newtonian lubricant under pure rolling. The film thickness distribution was computed using a numerical simulation with measured rheological lubricant properties. The numerical predictions, obtained solving the generalized Reynolds equation were compared with film thicknesses measured in an optical ball-on-disc device. The numerical results correctly predict the absolute film thickness and the film thickness increase with rolling speed.     

Evaluation of a multimode fiber optic low coherence interferometer for path length resolved Doppler measurements of diffuse light

The performance of a graded index multimode fiber optic low coherence Mach-Zehnder interferometer with phase modulation is analyzed. Investigated aspects were its ability to measure path length distributions and to perform path length resolved Doppler measurements of multiple scattered photons in a turbid suspension of particles undergoing Brownian and translational motion. The path length resolution of this instrument is compared with a system using single mode fibers for illumination and detection. The optical path lengths are determined from the zero order moment of the phase modulation peak in the power spectrum. The weighted first moment, which is equal to the average Doppler shift, shows a linear response for different mean flow velocities within the physiological range.     

Acetaldehyde in Mineral Water Stored in Polyethylene Terephthalate (PET) Bottles: Odour Threshold and Quantification

The use of PET bottles for packaging soft drinks and mineral waters is still growing world wide. The production process for these bottles is improving constantly. These improvements are focussed on bottles with better barrier properties, higher inertness and higher heat stability. One of the factors determining the quality of PET bottles is the release of acetaldehyde into the product during storage. A literature survey was conducted on the odour and taste detection threshold of acetaldehyde in water. A method is described to rapidly determine the concentration of acetaldehyde in water up to a level of 1 μg/l. This method was used to determine the concentration of acetaldehyde in mineral water during storage in PET bottles. In still water no acetaldehyde could be found, whereas the concentration of acetaldehyde in carbonated mineral water increased steadily upon storage. Model experiments were performed to find an explanation.     

Lifetime Assessment of Load‐Bearing Polymer Glasses: An Analytical Framework for Ductile Failure

The most widespread application of polymers in structural applications is their use as pipe material for e.g., gas distribution systems. Pipes have a design lifetime of typically 50 years, which rules out real‐time lifetime assessment methods. Here, an engineering approach is presented, which makes it possible to predict long‐term ductile failure of loaded glassy polymers based on short‐term tests. The approach is based upon the hypothesis that failure is governed by accumulation of plastic deformation up to a critical strain. A pressure‐modified Eyring relation is employed to calculate the accumulation of plastic strain for any simple loading geometry. It is demonstrated that the approach can produce accurate quantitative time‐to‐failure predictions for loaded PC specimens and uPVC pipe segments.