Subarachnoid haemorrhage induced proliferation of leptomeningeal cells and deposition of extracellular matrices in the arachnoid granulations and subarachnoid space. Immunhistochemical study

Subarachnoid haemorrhage (SAH) often leads to subarachnoid fibrosis and resultant normal pressure hydrocephalus; however, how subarachnoid fibrosis occurs is unknown. We examined the changes within arachnoid granulations (AGs) and the subarachnoid space (SAS) chronologically at the parasagittal region obtained from patients with SAH at autopsy and made comparison with controls by immunostaining for cytokeratin, specific marker for leptomeningeal cells and by the elastica Masson-Goldner methods. Within a week some AGs were torn, and many inflammatory cells filled the AGs and SAS. Cytokeratin positive cells were scarce. During the next two weeks cytokeratin positive cells increased. After three weeks, AGs and SAS were filled by dense deposits of extracellular matrices surrounded by multiple layers of leptomeningeal cells.     

Simple chemical syntheses of TAG monohydroperoxides

For the purpose of synthesizing standards to be used in the quantification of TAG hydroperoxides, three TAG (1,2-dioleoyl-3-palmitoylglycerol, 1-oleoyl-2-linoleoyl-3-palmitoylglycerol, and triolein) monohydroperoxides were chemically synthesized as authentic specimens. TAG were prepared by using a simple condensation in pyridine of glycerol and the corresponding acid chlorides. These TAG were then converted into monohydroperoxides by a photosensitized peroxidation. The synthesized monohydroperoxides were analyzed by normal-phase and RP-HPLC. The results of normal-phase HPLC analysis showed that monohydroperoxides from a corresponding TAG were a mixture of regioisomers. In RP-HPLC, however, the regioisomers of monohydroperoxides were not separated and gave a single peak, which may improve the sensitivity for the detection of TAG monohydroperoxides. In this study TAG monohydroperoxide standards were synthesized; these will be useful for the study of yet unknown biological and pathological roles of TAG hydroperoxides.     

Fracture behaviour and numerical study of resistance spot welded joints in high-strength steel sheet

Cross tension tests of resistance spot welded joints with varying nugget diameter were carried out using 980 MPa high strength steel sheet of 1.6 mm thickness. In proportion, as nugget diameter increased from 3√t to 5√t (where t is thickness), cross tension strength (CTS) increased while fracture morphology simultaneously transferred from interface fracture to full plug fracture. In cases of interface fracture, circumferential crack initiation due to separation of the corona bond arose at an early stage of loading. The crack opening process without propagation was recognized until just before fracture and then the crack propagated to the nugget immediately in a brittle manner around CTS. In full plug fracture, main ductile crack initiation from the notch-like part at the end of sheet separation occurred with the sub-crack initiated at an early stage. The ductile crack propagated toward the HAZ and base material to form full plug fracture. The mode I stress intensity factor was considered as a suitable fracture parameter because the circumferential crack behaved pre-crack for brittle fracture in the nugget region at the final stage. Based on the FE analysis, the mode I stress intensity factor was calculated as 116 MPa √m at CTS as fracture toughness for the nugget. With respect to full plug fracture, ductile crack initiation behaviour from the notch-like part was expressed by concentration of equivalent plastic strain. On the assumption that the ductile crack arose in critical value of equivalent plastic strain, the value was calculated as 0.34 by FE analysis. Reasonable interpretation for interface fracture and full plug fracture in the resistance spot welded joint was proposed due to first crack initiation by stress concentration, brittle fracture by using mode I stress intensity factor, and ductile crack initiation by using equivalent plastic strain.     

Additive Sintering,Postannealing, and Dielectric Properties of SrTaO2N

The maintaining of the chemical composition and electrical insulativity of SrTaO₂N ceramics was investigated during sintering and annealing, using powders prepared by the nitridation of Sr₂Ta₂O₇. Due to the low thermal stability of SrTaO₂N, the partial loss of SrO and nitrogen induced the formation of a TaO_0.9 impurity after heat‐treating at above 1100°C. The sintering additive SrCO₃ and postannealing in NH₃ were employed to compensate for the loss of SrO and nitrogen to obtain ceramics with the original chemical composition. The as‐sintered SrTaO₂N ceramics with various relative density (RD) were annealed in NH₃ to observe the recovery of color and electrical insulativity. It was found that the inner part of the well‐sintered samples with RD = 95.1% could not be recovered by annealing, and continued to exhibit semiconducting behavior and a black color. On the other hand, for the as‐sintered SrTaO₂N ceramics with RD < 84%, both the nitrogen content and electrically insulating behavior were completely recovered after annealing. The postannealed SrTaO₂N ceramics (RD = 83.3%) possessed a relatively large dielectric constant of 450 with a low dielectric loss of less than 0.1 at 100 Hz, almost independent of frequency and temperature.     

TEM/STEM Observation of ZrC Coating Layer for Advanced High-Temperature Gas-Cooled Reactor Fuel, Part II

The Japan Atomic Energy Agency (JAEA) has started to study and develop zirconium carbide (ZrC)-coated fuel particles for advanced high-temperature gas-cooled reactors. The ZrC coating layer has been fabricated at JAEA by chemical vapor deposition using a pyrolytic reaction of zirconium bromide. The microstructures of the ZrC layers, whose nominal deposition temperatures could be measured and controlled during the deposition process, were characterized by means of TEM and STEM. In the present study, three batches were prepared and compared with each other as well as the previous batches. The crystallographic orientation of ZrC with regard to the growth direction in the ZrC layers deposited at a constant temperature of 1630 K was different from that deposited at varying temperatures in the 1493–1823 K range. A thin layer of turbostratic carbon was observed at the boundary between pyrolytic carbon and ZrC in particles deposited at the highest temperature among those used in this study (the nominal temperature was 1769 K); no such structure was found in a batch deposited at a lower temperature (the nominal temperature was 1632 K). Therefore, precise control of temperature is shown to be critical to the formation of good ZrC coatings.     

Electronic Structures of Two-Phase Microstructures in Pb-doped Bi2Sr2CaCu2O y

We have performed scanning tunneling microscopy/spectroscopy (STM/STS) on single crystals of heavily Pb-doped Bi ₂ Sr ₂ CaCu ₂ O _y (Pb-Bi2212). The obtained STM images clearly demonstrated phase separation into the and phases with lamella-type and new zigzag-like microstructures. From the site-specified tunneling measurements, it was directly confirmed that the phase possesses higher T _c . This suggests that the phase boundaries act as strong pinning sites especially at higher temperatures.     

Forced vibration tests and simulation analyses of a nuclear reactor building

Forced vibration tests were carried out at the Hamaoka (BWR) Unit 4 R/B (reactor building) in Japan in April and May of 1992. Fundamental dynamic characteristics of the R/B were obtained, including its interaction with the adjacent T/B (turbine building) and the soil–structure interaction. Results for the preceding R/Bs are compared, and probable causes for fluctuations in the resonance curve around the 1st peak are discussed. Furthermore, simulation analyses of the fundamental dynamic characteristics of the soil–structure system were conducted, using a basic lumped-mass soil–structure model (lattice model), and strong correlation with the measured data was obtained. Other detailed simulation models were employed to investigate the effects of simultaneously induced vertical response and response of the adjacent turbine building on the lateral response of the reactor building.     

Niobium–aluminum oxynitride prepared by ammonolysis of oxide precursor obtained through the citrate route

Oxynitrides in the (Nb_1−xAl_x)(O,N) quaternary system were prepared by ammonolysis of oxide precursor obtained through the citrate route. The products at 1000 °C were a mixture of Nb(N,O) and NbN_0.95 at the niobium end (x = 0) and amorphous Al(O,N) at the aluminum end (x = 1). A new cubic compound (A) appeared mixed with Nb(N,O) in the compositional range 0.1 ≤ x ≤ 0.4. Its almost pure product was obtained at x = 0.5. The X-ray diffraction pattern was rock salt type (Nb_0.56Al_0.44)(O_0.38N_0.37□₀₂₅) in F_m−3m with a = 0.43481(1) nm. The product showed superconductivity with T_c = 15 K. Its crystallinity was much improved and its superconducting volume fraction increased to 32% after its thermal annealing at 1100 °C in evacuated sealed tube. A second cubic compound (B), rock salt type Nb[(O,N)_0.85□_0.15] with a = 0.434 nm, was observed mixed with amorphous Al(O,N) in the as-prepared products of the range 0.6 ≤ x ≤ 0.9.