Work of fracture of high impact polystyrene (HIPS) film under plane stress conditions

Essential work of fracture methodology was used to determine plane-stress ductile fracture toughness of high impact polystyrene film of thickness 0.26 mm. Results obtained indicated that specific essential work of fracture, w _e, is independent of loading rate, and for certain specimen sizes, independent of both gauge length and width of the specimen. On the other hand, w _e was found to be affected by the temperature, molecular anisotropy and the geometry of the test specimens. Reasonable estimate of w _e was obtained via crack opening displacement value.     

Selectivity Enhancement to the Exclusive Formation of Ethyltoluenes and Hydrogen During Dehydroalkylation of Toluene with Ethane

The dehydroalkylation of toluene with ethane to the isomeric ethyltoluenes was studied on 0.4Pt/H-ZSM-5 at varying contact times (1/WHSV). At a high contact time of 1.0 h, toluene disproportionation and hydrogenolysis reactions dominate, resulting in low selectivity to the desired ethyltoluenes via the alkylation reaction. However, at a low contact time of 0.12 h side reactions are eliminated, resulting in maximum selectivities to the kinetically favored ethyltoluenes and hydrogen. Results at high selectivities to ethyltoluenes provide significant insight into reaction pathways.     

Single and multi-specimenR-curve methods forJ IC determination of toughened nylons

For characterization of the fracture resistance of materials used in the upper shelf toughness regime,J-R curves are widely considered the most promising candidates. However, there still remain problems concerning both the generation and measurement ofJ-R curves as material characterizing parameters and their application in ductile fracture analyses for failure prediction in polymeric materials. This paper reports the results of investigations conducted on two rubbertoughened nylons at room temperature. Two different methods ofJ-R curve determination are covered, namely multi-specimen and single specimen test methods. The resultingJ-R curves have also been evaluated to obtain values of the initiation toughness,J _IC, following the extrapolation and interpolation schemes prescribed by ASTM E813-81 and ASTM E813-87 test procedures, respectively. The results show that the multiple specimen unloading method and the single specimen partial unloading compliance method can be used to generate comparable crack growth resistanceJ-R curves of the toughened nylons. The value ofJ _IC for the crystalline rubber-toughened nylon was approximately twice the value obtained for the amorphous rubber-toughened nylon. The former material also exhibited a greater resistance to ductile crack growth.     

Reconstruction of reflectance spectra using weighted principal component analysis

The weighted principal component analysis technique is employed for reconstruction of reflectance spectra of surface colors from the related tristimulus values. A dynamic eigenvector subspace based on applying certain weights to reflectance data of Munsell color chips has been formed for each particular sample and the color difference value between the target, and Munsell dataset is chosen as a criterion for determination of weighting factors. Implementation of this method enables one to increase the influence of samples which are closer to target on extracted principal eigenvectors and subsequently diminish the effect of those samples which benefit from higher amount of color difference. The performance of the suggested method is evaluated in spectral reflectance reconstruction of three different collections of colored samples by the use of the first three Munsell bases. The resulting spectra show considerable improvements in terms of root mean square error between the actual and reconstructed reflectance curves as well as CIELAB color difference under illuminant A in comparison to those obtained from the standard PCA method. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 360–371, 2008     

High-breakdown-voltage AlInAs/GaInAs junction-modulated HEMT's(JHEMT's) with regrown ohmic contacts by MOCVD

A technology for increasing both the two-terminal gate-drain breakdown and subsequently the three-terminal-off-state breakdown of AlInAs/GaInAs high-electron-mobility transistors (HEMTs) to record values without substantial impact on other parameters is presented. The breakdown in these structures is dependent on the multiplication of electrons injected from the source (channel current) and the gate (gate leakage) into the channel. In addition, holes are generated by high fields at the drain and are injected back into the gate and source electrodes. These phenomena can be suppressed by increasing the gate barrier height and alleviating the fields at the drain. Both have been achieved by incorporating a p⁺-2DEG junction as the gate that modulates the 2DEG gas and by utilizing selective regrowth of the source and drain regions by MOCVD. The 1-μm-gate-length devices fabricated have two-terminal gate-drain and three-terminal-off-state breakdown voltages of 31 V and 28 V, respectively     

ECFGM: enriched control flow graph miner for unknown vicious infected code detection

Vicious codes, especially viruses, as a kind of impressive malware have caused many disasters and continue to exploit more vulnerabilities. These codes are injected inside benign programs in order to abuse their hosts and ease their propagation. The offsets of injected virus codes are unknown and their targets usually are latent until they are executed and activated, what in turn makes viruses very hard to detect. In this paper enriched control flow graph miner, ECFGM in short, is presented to detect infected files corrupted by unknown viruses. ECFGM uses enriched control flow graph model to represent the benign and vicious codes. This model has more information than traditional control flow graph (CFG) by utilizing statistical information of dependent assembly instructions and API calls. To the best of our knowledge, the presented approach in this paper, for the first time, can recognize the offset of infected code of unknown viruses in the victim files. The main contributions of this paper are two folds: first, the presented model is able to detect unknown vicious code using ECFG model with reasonable complexity and desirable accuracy. Second, our approach is resistant against metamorphic viruses which utilize dead code insertion, variable renaming and instruction reordering methods.     

Query processing optimization in broadcasting XML data in mobile communications

Todays, XML as a de facto standard is used to broadcast data over mobile wireless networks. In these networks, mobile clients send their XML queries over a wireless broadcast channel and recieve their desired XML data from the channel. However, downloading the whole XML data by a mobile device is a challenge since the mobile devices used by clients are small battery powered devices with limited resources. To meet this challenge, the XML data should be indexed in such a way that the desired XML data can be found easily and only such data can be downloaded instead of the whole XML data by the mobile clients. Several indexing methods are proposed to selectively access the XML data over an XML stream. However, the existing indexing methods cause an increase in the size of XML stream by including some extra information over the XML stream. In this paper, a new XML stream structure is proposed to disseminate the XML data over a broadcast channel by grouping and summarizing the structural information of XML nodes. By summarizing such information, the size of XML stream can be reduced and therefore, the latency of retrieving the desired XML data over a wirless broadcast channel can be reduced. The proposed XML stream structure also contains indexes in order to skip from the irrelevant parts over the XML stream. It therefore can reduce the energy consumption of mobile devices in downloading the results of XML queries. In addition, our proposed XML stream structure can process different types of XML queries and experimental results showed that it improves the performace of XML query processing over the XML data stream compared to the existing research works in terms of access and tuning times.

     

Incorporation of a Regularization Term to Control Negative Correlation in Mixture of Experts

Combining accurate neural networks (NN) in the ensemble with negative error correlation greatly improves the generalization ability. Mixture of experts (ME) is a popular combining method which employs special error function for the simultaneous training of NN experts to produce negatively correlated NN experts. Although ME can produce negatively correlated experts, it does not include a control parameter like negative correlation learning (NCL) method to adjust this parameter explicitly. In this study, an approach is proposed to introduce this advantage of NCL into the training algorithm of ME, i.e., mixture of negatively correlated experts (MNCE). In this proposed method, the capability of a control parameter for NCL is incorporated in the error function of ME, which enables its training algorithm to establish better balance in bias-variance-covariance trade-off and thus improves the generalization ability. The proposed hybrid ensemble method, MNCE, is compared with their constituent methods, ME and NCL, in solving several benchmark problems. The experimental results show that our proposed ensemble method significantly improves the performance over the original ensemble methods.     

A robust critical path in an environment with hybrid uncertainty

In this article, we consider the project critical path problem in an environment with hybrid uncertainty. In this environment, the duration of activities are considered as random fuzzy variables that have probability and fuzzy natures, simultaneously. To obtain a robust critical path with this kind of uncertainty a chance constraints programming model is used. This model is converted to a deterministic model in two stages. In the first stage, the uncertain model is converted to a model with interval parameters by alpha-cut method and distribution function concepts. In the second stage, the interval model is converted to a deterministic model by robust optimization and min-max regret criterion and ultimately a genetic algorithm with a proposed exact algorithm are applied to solve the final model. Finally, some numerical examples are given to show the efficiency of the solution procedure.     

Hybrid effects on mechanical properties of polyoxymethylene

The present study investigated fracture and various mechanical properties of polyoxymethylene (POM) hybrids in tension and in flexure. The hybrids examined consisted of short glass fibers (GF) and spherical glass beads (GB). Comparisons are made between experimentally observed values and predictions based on the rule-of-hybrid mixtures for hybrid strength, modulus, impact strength, fracture toughness, and strain energy release rates. Results indicated that tensile strength, flexural modulus, and fracture toughness of POM/GB/GF hybrid composites can be estimated from the following rule-of-hybrid mixtures where P_POM/GB and P_POM/GF are the measured properties of the POM/GB and POM/GF composites, and χ_POM/GB and χ_POM/GF are the hybrid ratio (by volume) of the glass bead and that of glass fiber, respectively. In view of this, none of the aforementioned properties show any signs of a hybrid effect. Flexural strengths, impact strengths, and strain energy release rate all showed the existence of a negative hybrid effect where negative deviation from the rule-of-mixtures behavior was observed. The latter was closer to the estimation based on the inverse rule-of mixtures.