Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

Microbial community dynamics in replicate membrane bioreactors - Natural reproducible fluctuations

We operated 4 replicate membrane bioreactors (MBRs) in parallel to test if an acclimated seed inoculum would evolve similarly following even distribution into replicates. A cloning and sequencing library of 16S rRNA genes was obtained from the seed inoculum complemented with terminal restriction fragment length polymorphism (T-RFLP; n = 18 per reactor) analysis over the study period (n = 113 d) that targeted the 16S rRNA gene. The amoA functional gene was also monitored by T-RFLP. The T-RFLP results were analyzed by means of diversity indices, an adaptation of a moving window of similarity approach within each MBR, and non-metric multi-dimensional scaling (NMS) accompanied with multi-response permutation procedures (MRPP) to assess community interrelationships amongst MBRs. Based on the 16S rRNA microbial communities, the 4 MBRs initially diverged away from one another, followed by a convergence on Day 4. From thereon, the 16S rRNA-based communities evolved similarly throughout (average p-value = 0.49 from pair-wise MRPP). In contrast, the nitrifying communities did not undergo any discernable shift over time amongst MBRs according to T-RFLP analysis of amoA and revealed one cluster by NMS (average p-value = 0.83 from pair-wise MRPP). The study demonstrates that acclimated microbial communities evolve similarly over time in engineered systems when operational parameters are left unchanged.     

Biological nitrogen and phosphorus removal and changes in microbial community structure in a membrane bioreactor: effect of different carbon sources

Bacterial community structures in four sequencing anoxic/anaerobic-aerobic membrane bioreactors (SAMs) that were fed with synthetic medium composed of different organic compounds in substrate as carbon source; acetate-dominant (acetate/propionate = 4/1), propionate-dominant (acetate/propionate = 1/4), glucose-dominant (glucose/acetate = 4/1) and methanol-dominant (methanol/acetate/propionate = 6/3/1) were analyzed by respiratory quinone profile and fluorescent in situ hybridization (FISH) techniques. The SAMs were operated at controlled pH range 7-8.5 and at constant temperature 25 degrees C. Total nitrogen (TN), total phosphorus (TP) and COD removal performances were also evaluated and compared. In addition, trans-membrane pressure was monitored to observe the impact of substrate composition on membrane fouling. The dominance of the mole fraction of ubiquinone (UQ-8) in the SAMs indicated dominance of the beta-subclass of Proteobacteria; however, its population comparatively decreased when the substrate was glucose dominant or methanol dominant. A relatively higher and stable enhanced biological phosphorus removal performance was observed when methanol-dominant substrate was used concurrently with an increase in the gamma-subclass of Proteobacteria. The population of the alpha-subclass of Proteobacteria slightly increased along with a decrease in phosphate removal activity when the substrate was glucose-dominant. Results from FISH analysis also supported the findings of the quinone profile. The trans-membrane pressure variation in the SAMs indicated that fouling was relatively rapid when propionate-dominant or methanol-dominant substrate was used and most stable when glucose-dominant substrate was used. A combination of methanol and acetate would be a better choice as an external carbon source when nutrients removals, as well as fouling, are considered in the membrane bioreactor- (MBR-) coupled biological nutrients removing (BNR) process.     

In Vitro Cytotoxic Evaluation of MgO Nanoparticles and Their Effect on the Expression of ROS Genes

Water-dispersible MgO nanoparticles were tested to investigate their cytotoxic effects on oxidative stress gene expression. In this in vitro study, genes related to reactive oxygen species (ROS), glutathione S-transferase (GST) and catalase, were quantified using real-time polymerase chain reactions (molecular level) and molecular beacon technologies (cellular level). The monodispersed MgO nanoparticles, 20 nm in size, were used to treat human cancer cell lines (liver cancer epithelial cells) at different concentrations (25, 75 and 150 µg/mL) and incubation times (24, 48 and 72 h). Both the genetic and cellular cytotoxic screening methods produced consistent results, showing that GST and catalase ROS gene expression was maximized at 150 µg/mL nanoparticle treatment with 48 h incubation. However, the genotoxic effect of MgO nanoparticles was not significant compared with control experiments, which indicates its significant potential applications in nanomedicine as a diagnostic and therapeutic tool.     

Characteristics of simultaneous nitrogen and phosphorus removal in a pilot-scale sequencing anoxic/anaerobic membrane bioreactor at various conditions

This study was conducted to evaluate the performance of pilot-scale sequencing anoxic/anaerobic membrane bioreactor (SAM) process under various real situations. During the pilot experiment, the effect of three important operational parameters, such as hydraulic retention time (HRT), solids retention time (SRT) and internal recycling time mode were estimated and the long-term membrane fouling behaviour was also investigated. During the operation period, the COD removal efficiency was higher than 95% regardless of change of operational conditions because the membrane significantly contributed to remove COD by the complete retention of all particulate COD and macromolecular COD components. The change of Ax/An ratio representing internal recycling time mode significantly affected on nitrogen and phosphorus removal. As increasing Ax/An ratio, nitrogen removal efficiency increased but phosphorus removal efficiency decreased. As HRT decreased, phosphorus removal efficiency increased and nitrogen removal efficiency also increased until a certain limit of HRT (6.5 h in this study). However, when HRT decreased over the limit, nitrogen removal efficiency decreased because of insufficient nitrification. Relation between phosphorus removal efficiency and SRT was a little bit complex because SRT determined both the phosphorus content in the sludge and the sludge wasting rate. However, in this study, the shorter SRT resulted in the higher phosphorus removal efficiency. The effect of changes in all operational conditions was sensitive on phosphorus rather than on nitrogen removal efficiency. The increasing in influent flowrate resulted in the increase of flux and caused a rapid membrane fouling. Thus, the flux of 7.7 L/m²/h was more desirable compared to the 10.7 or 15.4 L/m²/h in this study.