Extensions of polyacrylic acid ammonium salts in the adsorption layer to fluidize alumina slurries

An average shell volume occupied in the adsorption layer on alumina by a polyacrylic acid ammonium salts molecule (PAA) defined as the average area occupied by an adsorbed PAA on alumina multiplied by the average thickness of the water layer at the limit of thickening, has been calculated from the adsorbed amount of PAA and from the flow points of alumina in the presence of PAA of different molecular weights. A steric effect of the PAA dispersant on the dispersion of alumina resulted in a flow with no yield stress. This was due to the change of the extension of PAA in the adsorption shell from a sphere to an ellipsoid with a long axis which exceeded the effective distance that the van der Waals attraction force reaches at a molecular weight for the PAA of between 10 000–20 000.     

Osteoclastic features of multinucleated giant cells responding to synthetic hydroxyapatite implanted in rat jaw bone.

Multinucleated giant cells (MGCs) that responded to synthetic hydroxyapatite (HAP) implanted in rat mandibles were studied with electron microscopy. HAP used in this study sintered at 200 degrees C (HAP200) and at 125 degrees C (HAP1250) after the synthesis by a wet method. One to three weeks after the intraosseous implantation of HAP, MGCs responding to HAP200 had not only well-developed ruffled border and the clear zone but well-developed perinuclear Golgi complex, many mitochondria and vesicles in their cytoplasms. MGCs responding to HAP1250 had the clear zone, but not the ruffled border although they showed similar cytoplasmic features to those of MGCs responding to HAP200. They merely extended short slender cytoplasmic processes to HAP1250. These results suggest that although osteoclast-like MGCs respond to HAP implanted in the bone, the development of the ruffled border-clear zone system depends on physicochemical properties of HAP.     

Surface Hardening of Carbon Steel Using High Powered YAG Laser

A high powered YAG laser with kaleidoscope for surface modification was applied to the surface hardening of carbon steels containing 0. 18-0.54 wt% C without the absorbents, and the relationships between laser processing and surface hardening were investigated by hardness and microstructure. The structure of the hardened zone underwent complete martensitic transformation in all of the carbon steels tested, and its hardness increased with greater carbon content. Under identical irradiated conditions, the hardened zone expanded with increasing carbon content. A hardened zone extending from the surface to a depth of 1.0 mm was obtained at a laser power of 1.0 kW and a scanning speed of 1 mm/sec. It was found that in the surface hardening of carbon steels, a high powered YAG laser can be used to control the hardened zone by selecting the appropriate irradiation conditions, however, the hardened zone was affected by the assistant gas and the flow rate.     

The Effect of Lanthanum on the Scales Developed on Thin Foils of Fe-20Cr-5Al at Very High Temperatures

A study has been undertaken of the effects oflanthanum on the oxidation of thin foils of Fe-20Cr-5Alin air at 1150°C. The addition of lanthanum causesthe time to breakaway to increase from about 24 hr for Fe-20Cr-5Al to over 400 hr. Oxidationof the lanthanum-containing alloy occurs in threestages. During the first stage, an-Al₂O₃ layer is establishedand thickens with time until the aluminum in the foil is depleted sufficiently for alayer of Cr₂O₃ to become stableand develop at the scale-alloy interface. This continuesto thicken at a relatively slow rate until breakawayoccurs. The main emphasis in the present paper has been anexamination and analysis of the scale established on thelanthanum-containing alloy in cross section in theanalytical transmission electron microscope (TEM), after an exposure period that coincides with thesecond stage of oxidation, prior to breakaway. The scaleat that time consists of three layers. The outer layeris composed of equiaxed Al₂O₃grains. The intermediate and inner layers consist of columnarAl₂O₃ grains and equiaxedCr₂O₃ grains, respectively.Numerous voids are observed in the oxide grainboundaries and at the intermediate-inner layerinterface. Lanthanum segregates in the oxide grain boundaries andits concentration increases toward the outermost surfaceof the scales. These results are consistent with thedynamic segregation model to account for the effects of reactive elements on thegrowth of Al₂O₃ scales.     

Wide-gap layered oxychalcogenide semiconductors: Materials, electronic structures and optoelectronic properties

Applying the concept of materials design for transparent conductive oxides to layered oxychalcogenides, several p-type and n-type layered oxychalcogenides were proposed as wide-gap semiconductors and their basic optical and electrical properties were examined. The layered oxychalcogenides are composed of ionic oxide layers and covalent chalcogenide layers, which bring wide-gap and conductive properties to these materials, respectively. The electronic structures of the materials were examined by normal/inverse photoemission spectroscopy and energy band calculations. The results of the examinations suggested that these materials possess unique features more than simple wide-gap semiconductors. Namely, the layered oxychalcogenides are considered to be extremely thin quantum wells composed of the oxide and chalcogenide layers or 2D chalcogenide crystals/molecules embedded in an oxide matrix. Observation of step-like absorption edges, large band gap energy and large exciton binding energy demonstrated these features originating from 2D density of states and quantum size effects in these layered materials.     

Training techniques for neural network applications in ATM

The main problems of adaptive ATM quality of service (QoS) control methods using neural networks were the exponentially wide range of the output target and the real-time training data sampling. But new practical techniques to overcome these problems may open new neural network applications. In this article, the framework of connection admission control (CAC) is described as a typical example of neural-network-based QoS estimation and two practical techniques, called relative target method and virtual output buffer method, are presented to enhance the neural network performance in CAC     

Specific changes in human brain following reperfusion after cardiac arrest

BACKGROUND AND PURPOSE: Very few reports are available on serial changes in human brain after cardiac arrest. The primary objective of this study is to investigate sequential neuroradiological changes in patients remaining in a persistent vegetative state following resuscitation after cardiac arrest. METHODS: We repeatedly studied eight vegetative patients resuscitated from unexpected out-of-hospital cardiac arrest using computed tomographic (CT) scanning and high-field magnetic resonance (MR) imaging at 1.5 T. RESULTS: In seven of the eight patients, CT scans obtained between days 2 and 6 features symmetrical low-density lesions in the bilateral caudate, lenticular, and/or thalamic nuclei. These ischemic lesions were persistently of low density on serial CT scans. In these seven patients, MR images demonstrated what were thought to be hemoglobin degradation products derived from minor hemorrhages localized in the bilateral basal ganglia, thalami, and/or substantia nigra. Diffuse brain edema in the acute stage and diffuse brain atrophy in the chronic stage were consistent neuroradiological findings. No abnormal enhanced lesions were demonstrated by CT scans. CONCLUSIONS: The most characteristic findings on high-field MR images were symmetrical lesions in the bilateral basal ganglia, thalami, and/or substantia nigra with specific changes suggestive of minor hemorrhages that were not evident on CT scans. We speculate that these minor hemorrhages result from diapedesis of red blood cells in these regions during the reperfusion period through the endothelium disrupted by ischemia-reperfusion insult.     

Layered mixed-anion compounds: Epitaxial growth,active function exploration,and device application

Optoelectronic properties and device applications of layered mixed-anion compounds such as oxychalcogenide LaCuOCh (Ch = chalcogen) and oxypnictide LaT_MOPn (T_M = 3d transition metal, Pn = pnicogen) are reviewed. Several distinctive functions have been found in these materials based on our original material exploration concept. Fabrication of high-quality epitaxial films of LaCuOCh leads to clarifying the excellent electrical and optical properties such as high hole mobility of 8 cm²/(V s) and heavy hole doping at >10²¹ cm^?3 in LaCuOSe, and sharp and tunable-wavelength photoluminescence in the solid–solution systems in LaCuOCh. In addition, a room temperature operation of a light-emitting diode is demonstrated using LaCuOSe as a light-emitting layer. These results suggest that the layered oxychalcogenides have potential for light-emitting layers as well as transparent hole-injection layers in organic/inorganic light-emitting diodes. Furthermore, by extending the material system from the copper-based oxychalcogenides to isostructural compounds, transition metal-based oxypnictides LaT_MOP (T_M = Fe, Ni), we have found novel superconductors, LaFeOP and LaNiOP.     

Detection of Verotoxigenic Escherichia coli O157 and O26 in food by plating methods and LAMP method: a collaborative study

In order to establish a rapid and sensitive method for the detection of Verotoxigenic Escherichia coli O157 and O26, a collaborative study was conducted focusing on a comparison of the efficiency of loop-mediated amplification (LAMP) assay targeting the Verocytotoxin (also called Shiga toxin) gene, utilizing a direct plating method and a plating method with immunomagnetic separation (IMS-plating method) using various agar media. In combination with enrichment with the modified EC supplemented with novobiocin, E. coli O157 was detected in most samples of ground beef and alfalfa sprouts by LAMP assay, the direct plating method and the IMS-plating method. E. coli O26 was detected in approximately 100% of the food samples by LAMP assay. However, the IMS-plating and direct plating methods recovered 80 and 50% in ground beef samples, respectively. As a result, it was demonstrated the LAMP assay is superior to the IMS-plating method. Based on these results, it appears LAMP assay is effective as a screening assay to detect E. coli O157 and O26 from positive samples.     

Effects of gomisin A on the promotor action and serum bile acid concentration in hepatocarcinogenesis induced by 3'-methyl-4-dimethylamino-azobenzene

The effects of gomisin A, a lignan component of Schizandra fruits, on the promotion stage of hepatocarcinogenesis initiated by 3'-methyl-4-dimethylamino-azobenzene (3'-MeDAB) in male Donryu rats were investigated. When different types of tumor promotors, phenobarbital (PB) and deoxycholic acid (DCA), were administered for 5 weeks after initiation by 3'-MeDAB, preneoplastic alterations in the liver, determined by glutathione S-transferase placental form (GST-P), were markedly increased. Gomisin A significantly inhibited the increase in number and size of GST-P positive foci, regardless of the promotor. This lignan inhibited the increase in serum bile acid concentration by administration of DCA, but hardly influenced the serum bile acids in the PB-combined group. These results suggest that the inhibitory effect of gomisin A on the promotive action of DCA is based on improving bile acid metabolism, but regarding the action of PB, the effect could not be elucidated from the metabolism of bile acids.