Towards a comprehensive methodology for KBS development

Abstract: The vitality of effective methods and processes for developing knowledge-based systems (KBS) is examined. The paper discusses what should be expected from a methodology. Have their advocates been getting it all wrong all the way? That is certainly a suggested view put forward. The criticism includes an articulation of the major schools of thought in developing KBS; their implicit assumptions and philosophies, especially the prototyping options, are presented in the light of this paper. After the criticism, the philosophical basis of a new comprehensive KBS development methodology is presented. This breeds the line model of development, which in turn creates what is suspected to be an essential concept of thought in the developer's mind.     

Impact of the wastedump ecosystem (phosphate ore dressing manufacture,Aswan, Egypt) on the surrounding environment

This study deals with evaluation of the impact of wastedump resulting from the phosphate ore dressing near the Mahamead Village (120 km north Aswan City), Aswan Governorate, Egypt, on the surrounding environment. The results indicate that the waste dump ecosystem contains elevated concentrations of Ca, Na, Cl～, SO^” and HCOJ as well as, relatively high concentrations of Fe, Mn, Pb and Cd. High pH (8.28–8.97) in all samples minimized the adverse effect on the soil and groundwater. The aerial parts of emergent weeds growing in the waste dump which used in this region as animal feed accumulate permissible limits of toxic metals. The wastedump can be a potential hazard to health and wildlife, if drainage from this dump (waste water) enters the Nile river.     

Corrosion of Mg alloys EV31A,WE43B,and ZE41A in chloride- and sulfate-containing solutions saturated with magnesium hydroxide

This study studied corrosion in 0.1 M Na₂SO₄, 0.1 M NaCl, and 0.6 M NaCl, all saturated with Mg(OH)₂, using weight loss, hydrogen evolution, and electrochemical measurements. Corrosion was similar in all cases. Nevertheless, the corrosion rates were alloy-dependent, were somewhat lower in 0.1 M Na₂SO₄ than in 0.1 M NaCl, and increased with NaCl concentration. The corrosion damage morphology was similar for all solutions; the extent correlated with the corrosion rate. The corrosion rates evaluated by the electrochemical methods were lower than those evaluated from hydrogen evolution, consistent with the Mg corrosion mechanism involving the unipositive Mg⁺ ion.     

Room temperature oxidation of acetone by ozone over alumina-supported manganese and cobalt mixed oxides

Volatile organic compounds (VOCs) are among the major sources of air pollution. Catalytic ozonation is an efficient process for removing VOCs at lower reaction temperature compared to catalytic oxidation. In this study, a series of alumina supported single and mixed manganese and cobalt oxides catalysts were used for ozonation of acetone at room temperature. The influence of augmenting the single Mn and Co catalysts were investigated on the performance and structure of the catalyst. The manganese and cobalt single and mixed oxides catalysts of the formula Mn10%-CoX and Co10%-MnX (where X= 0, 2.5%, 5%, or 10%) were prepared. It was found that addition of Mn and Co at lower loading levels (2.5% or 5%) to single metal oxide catalysts enhanced the catalytic activity. The mixed oxides catalysts of (Mn10%-Co2.5%) and (Mn10%-Co5%) led to acetone conversion of about 84%. It is concluded that lower oxidation state of the secondary metal improves ozone decomposition and oxidation of acetone.     

Proteome Based Approach Defines Candidates for Designing a Multitope Vaccine against the Nipah Virus

Nipah virus is one of the most harmful emerging viruses with deadly effects on both humans and animals. Because of the severe outbreaks, in 2018, the World Health Organization focused on the urgent need for the development of effective solutions against the virus. However, up to date, there is no effective vaccine against the Nipah virus in the market. In the current study, the complete proteome of the Nipah virus (nine proteins) was analyzed for the antigenicity score and the virulence role of each protein, where we came up with fusion glycoprotein (F), glycoprotein (G), protein (V), and protein (W) as the candidates for epitope prediction. Following that, the multitope vaccine was designed based on top-ranking CTL, HTL, and BCL epitopes from the selected proteins. We used suitable linkers, adjuvant, and PADRE peptides to finalize the constructed vaccine, which was analyzed for its physicochemical features, antigenicity, toxicity, allergenicity, and solubility. The designed vaccine passed these assessments through computational analysis and, as a final step, we ran a docking analysis between the designed vaccine and TLR-³ and validated the docked complex through molecular dynamics simulation, which estimated a strong binding and supported the nomination of the designed vaccine as a putative solution for Nipah virus. Here, we describe the computational approach for design and analysis of this vaccine.     

The effect of feedstock and process conditions on the synthesis of high purity CNTs from aromatic hydrocarbons

High purity multi-walled carbon nanotubes were synthesized from aromatic hydrocarbons (benzene, toluene, xylene and trimethyl benzene) using ferrocene as the source of Fe catalyst. Screening studies of aromatic feeds at 675 °C, residence time of 14 s and Fe/C atom ratio of 1.07%, resulted in feedstock carbon conversion of 20-31%, CNT yield of 19.8-30.5%, and catalyst yield of 5.3-8.3 (g CNT/g catalyst). While the quality of the CNTs as determined by TGA, SEM, TEM and Raman spectroscopy, were high and comparable for different feedstocks; their carbon conversion, CNT yield and catalyst yield differed noticeably. A process optimization study for toluene feed showed that carbon conversion of more than 39%, CNT yield of 38.7% and catalyst yield of 18.3 can be achieved at temperature of 800 °C, Fe/C atom ratio of 0.47%, and residence time of 10-20 s.     

Photoinduced operation and diagnostic of superconductivity in the MgB2 films

The occurrence of the optical second harmonic generation (SHG) at fundamental wavelength of Er:glass nanosecond 1,540 nm stimulated by two coherent CO₂ microsecond laser beams at wavelengths 10.6 and 5.3 μm was observed for the MgB₂ films. The SHG signal has shown its sensitivity to the occurrence of the superconducting (SC) phase transition. The SHG achieves its maximum at temperatures higher with respect to the SC transition. The effect is reversible with respect to the photo induced treatment. After the switching off of the external photoinducing treatment the effect almost disappears. However, this still strongly affects the SC properties of the MgB₂ thin layers, as the critical current is increased by 50 % after illumination.     

Electrical,electrochemical and photo-electrochemical studies on the electrodeposited n-type semiconductor hexagonal crystalline CdS thin film on nickel substrate

Electrodeposited cadmium sulfide (CdS) on nickel substrate of new properties from aqueous solutions of Cd²⁺ and S₂O₃ ^2? at 313 K has been obtained using cyclic voltammetric and potentiostatic techniques. The mechanism of the electrode reactions for the electrodeposition of CdS has been evaluated and proposed. Energy dispersive X-ray florescence elemental analysis and X-ray diffraction investigations demonstrate that, the electrodeposited CdS is pure and hexagonal polycrystalline in nature, at our optimal conditions. Furthermore, the electrodeposited CdS is of n-type semiconductor was investigated and confirmed by Mott–Schotky test. Donor concentration (N_D) was determined to be 1.0 × 10¹⁷ cm^?3. In this research we discovered that, the electrodeposited semiconductor CdS on Ni substrate has low resistivity and magnetic properties (became as a strong magnet) at the mentioned conditions. The photoelectrochemical measurements of the electrodeposited CdS on nickel electrode had been investigated at room temperature and under illumination giving good results.     

Analysis of time-dependent flow-sensitive PC-MRI data

Many flow visualization techniques, especially integration-based methods, are problematic when the measured data exhibit noise and discretization issues. Particularly, this is the case for flow-sensitive phase-contrast magnetic resonance imaging (PC-MRI) data sets which not only record anatomic information, but also time-varying flow information. We propose a novel approach for the visualization of such data sets using integration-based methods. Our ideas are based upon finite-time Lyapunov exponents (FTLE) and enable identification of vessel boundaries in the data as high regions of separation. This allows us to correctly restrict integration-based visualization to blood vessels. We validate our technique by comparing our approach to existing anatomy-based methods as well as addressing the benefits and limitations of using FTLE to restrict flow. We also discuss the importance of parameters, i.e., advection length and data resolution, in establishing a well-defined vessel boundary. We extract appropriate flow lines and surfaces that enable the visualization of blood flow within the vessels. We further enhance the visualization by analyzing flow behavior in the seeded region and generating simplified depictions.     

Microstructure and phase composition of cordierite-based co-clinker

The aim of this work is to study the effect of phase composition and microstructure of cordierite-based co-clinkers on the electrical properties and coefficient of thermal expansion of cordierite briquettes. To achieve this aim talc and kaolinite samples were collected from quarries in the Egyptian desert. The samples are characterized using XRD, XRF, polarized light, cathodoluminescence and SEM microscopy attached with EDAX, in addition to X-ray micro-computed tomography (3D- µXCT). The electrical properties and coefficient of thermal expansion of the cordierite briquettes are determined using HiTESTER instrument and automatic Netzsch DIL402 PC dilatometer, respectively.Five talc-based batches were shaped and fired in the temperature range 1000–1350 °C for 2 h. The microstructural and physical characteristics of the resulted cordierite-based co-clinkers depend mainly on the viscosity of the liquid phase developed during firing. The microchemistry of the cordierite briquettes confirms their enrichment of both cordierite and ferroan-cordierite crystallized directly from locally developed melts. The dielectric constant and loss factor values for cordierite briquettes allow their possible use as insulator components in electronic applications.