The strategy of edge wear prediction in CIM concept

A monitoring of tool wear in different cutting operations has been studied for many years. Special techniques have been used to detect a wear status basing upon cutting forces, acoustic emission, temperature, torque and power, vibration, noise and acceleration sensors. The adapting of a proper prediction method allows to solve problems of an automatic supervision in Computer Integrated Manufacturing systems. A task of the abrasive edge wear index prediction can be formulated as follows: disposing by the data collection of the edge wear status in a time period preceding the concerning the wear status in the successive time period embraced by the prediction method.     

Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Preparation of gold nanoparticles (GNP) aqueous suspensions by a new method involving Tiron

A new method is proposed to produce gold nanoparticles (GNP) by in situ reduction of a gold salt dissolved in water. The reducing agent used is Tiron instead of the citrate anion most often mentioned in literature. The influence of various parameters has been investigated, such as the content of Tiron with respect to that of the precursor of gold HAuCl₄, or the initial pH of the solution after mixing of reactants. It is shown that Tiron also exerts a positive influence as a dispersant, which impedes agglomeration of gold nanoparticles. The typical average size of GNP synthesized in the present work is close to 7 nm.     

3D Hair sketching for real-time dynamic & key frame animations

Physically based simulation of human hair is a well studied and well known problem. But the “pure” physically based representation of hair (and other animation elements) is not the only concern of the animators, who want to “control” the creation and animation phases of the content. This paper describes a sketch-based tool, with which a user can both create hair models with different styling parameters and produce animations of these created hair models using physically and key frame-based techniques. The model creation and animation production tasks are all performed with direct manipulation techniques in real-time.     

A rubber-modified thermoplastic where the morphology produced by phase-separation induced by polymerization disappears at high conversions

An unexpected experimental finding is reported where the primary morphology developed during polymerization-induced phase separation in a rubber-modified thermoplastic practically disappears at high conversions. This process was evidenced by light scattering (LS) and scanning electron microscopy (SEM) for a particular composition of solutions of polyisobutylene oligomers (PIB) in isobornylmethacrylate (IBoMA), during the free-radical polymerization of the monomer. The primary phase separation produced a dispersion of domains rich in PIB containing significant amounts of the monomer (IBoMA). Polymerization of the monomer in these domains occurred at high overall conversions producing the filling of dispersed domains with a PIBoMA-PIB blend that could not be distinguished from the matrix. Under these conditions the final material had the appearance of a homogeneous blend.     

Thomas Fincke und die <Emphasis Type="Italic">Geometria rotundi</Emphasis>

Thomas Fincke (January 6^th, 1561–April 24^th, 1656), born in Flensburg (Germany), was one of the very most important and significant scientists in Denmark during the seventeenth century, a mathematician and astrologer and physician in the beginning of modern science, a representative of humanism and an influentual academic organizer. He studied in Strasbourg (since 1577) and Padua (since 1583) and received his M.D. in Basel (1587), he practised as a physician throughout his life (since 1587 or 1590) and became a professor at Copenhagen (1591). But he was best known because of his Geometriae rotundi libri XIIII (1583), a famous book on plane and spherical trigonometry, based not on Euclid but on Petrus Ramus. In this influentual work, in which Fincke introduced the terms tangent and secant and probable first noticed the Law of Tangents and the so-called Newton-Oppel-Mauduit-Simpson-Mollweide-Gauss-formula, he showed himself to be „abreast of the mathematics of his time“.      

Granular gases in mechanical engineering: on the origin of heterogeneous ultrasonic shot peening

The behavior of an ultrasonic shot peening process is observed and analyzed by using a model of inelastic hard spheres in a gravitational field that are fluidized by a vibrating bottom wall (sonotrode) in a cylindrical chamber. A marked heterogeneous distribution of impacts appears when the collision between the shot and the side wall becomes inelastic with constant dissipation. This effect is one order of magnitude larger than the simple heterogeneity arising from boundary collision on the cylinder. Variable restitution coefficients bring the simulation closer to the general observation and allow the investigation of peening regimes with changing shot density. We compute within this model other physical quantities (impact velocities, impact angle, temperature and density profile) that are influenced by the number N of spheres.     

Pre-operational environmental survey at the uranium mine and mill site,Poços de Caldas,Minas Gerais,Brazil

The first Brazilian uranium mine and mill are located on the Poços de Caldas plateau, in the Central State of Minas Gerais. The pre-operational environmental survey was carried out over a period of two years by the Brazilian Nuclear Energy Commission (CNEN), through the Instituto de Radioproteção e Dosimetria (IRD). The selection of the materials to be monitored, the sampling points and the radionuclides to be analysed were based on critical parameters taking into account the meteorological and hydrological characteristics of the site as well as land use. The results obtained are sufficient to characterize the environmental background of the area, and will allow an assessment of the environmental impact due to the operation of the facility and an evaluation of the adequacy of the effluent emmission control measures. In relation to their contribution to the population dose, the results indicated that ²²⁶Ra and ²¹⁰Pb will be the important radionuclides.     

The composition of volatile extractives from the wood of Juniperus excelsa, Juniperus foetidissima and Juniperus oxycedrus

J. excelsa , J. foetidissima and J. oxycedrus. Among the compounds the monoterpenes exist in minor amounts while the sesquiterpenes including their oxygenated members as well as sesquiterpene alcohols consist of the majority of the whole substances. The existence of some compounds of the oils might be attributes of the species and their sap- and heartwood. On the other side though notable differences, the essential oils of Turkish juniper woods resemble the commercial cedar wood oils.

---

Die Zusammensetzung der flüchtigen Extraktstoffe im Holz von Juniperus foetidissima und Juniperus oxycedrus

J. excelsa , J. foetidissima und J. oxycedrus. Monoterpene bilden einen geringen Anteil der Extraktstoffe. Der Hauptteil besteht aus Sesquiterpenen mit deren Oxydationsprodukten. Das Vorkommen einiger der ?le k?nnte charakteristisch sein für die jeweilige Art bzw. deren Splint- und Kernholz Allerdings gleichen diese ?le, trotz geringer Unterschiede, den wesentlichen ?lbestandteilen von Kommerziellen Zedernh?lzern.

---

---

This work was supported by the research found of the Istanbul University. Project nr: 1335/280799.     

Potential science-technology spillovers in regions: An insight on geographic co-location of knowledge activities in the EU

This article depicts some features of the geography of science and technology outputs in the EU, with a particular attention to regional “co-location” of these two pillars of the “knowledge-based society”. Economists have, for a decade, paid great attention to local “spillovers” stating that industrial firms often draw advantages from the presence of nearby academic centres. The presence in the same areas of strong academic and technological resources is both a condition and a result of science-technology interactions. Concentrating on publications and patents as proxies of the science and technology level in regions, we built a typology of regions according to their commitment to the two knowledge-base activities and then analysed the co-locations of science and technology from several points of view. A fine-grain lattice, mainly based on standard Nuts3 level, was used. Co-location, at the EU level, is not a general rule. A strong potential for spillover/ interaction does exist in the top-class regions which concentrate a high proportion of European S and T output. But for regions with a small/medium level of S&T activity, a divergence of orientations appears between a science-oriented family and a technology-oriented family, indicating an imbalance between local S and T resources. If we look at the S-oriented regions, whilst controlling for underlying factors, such as population and regional economic product, a significant geographic linkage between T and S appears. This suggests a trajectory of science-based technological development. A careful examination of S&T thematic alignments and specialisation is necessary to develop the hypothesis that fostering academic resources could increase the technological power along a growth path. This revised version was published online in August 2006 with corrections to the Cover Date.