Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

Temperatures and Oxygen Isotopic Compositions of Hydrothermal Fluids for the Takatori Tungsten-copper Deposit, Japan

Abstract. Fluid inclusion and oxygen isotope studies are performed to obtain temperatures and oxygen isotopic compositions of hydrothermal fluids for the vein-type tungsten-copper deposit at Takatori in Ibaraki Prefecture, Japan. Temperatures of the hydrothermal fluids are calculated from fluid inclusion data. The calculation incorporates the effects of the salinity, gas concentration, and fluid pressure. The fluid temperatures range from 370 to 460C. For these calculations, this study obtains a density equation for H₂O-NaCl-CO₂ solution at the vapor-liquid two-phase boundary. Then the present study combines the obtained equation with the equation of state by Bowers and Helgeson (1983).
The fluid temperatures determined in this study are applied to the calculation of oxygen isotopic compositions of the hydrothermal fluids. The calculation of the oxygen isotopic compositions is based on the oxygen isotope analyses of vein quartz. The oxygen isotopic compositions of vein quartz range from +13.5 to +14.4 % relative to SMOW. Then, the oxygen isotopic compositions of the hydrothermal fluids in equilibrium with the vein quartz are calculated to be from +9.7 to +10.5 %. These δ¹⁸O_fluid values agree with those of magmatic fluids derived from the ilmenite-series granitic rock, which is related to the mineralization. Keywords: Takatori tungsten-copper deposit, fluid inclusion, oxygen isotope, vein quartz, H₂O-NaCl-CO₂ solution, density     

Pumpellyite in Low-grade Metamorphism

The regional metamorphism of the Kant? Mountains in Japan producedrocks of the following facies, with rising temperature: chloritefacies, pumpellyite-chlorite facies, glauco-phane-schist facies,and greenschist facies. This relationship is compared with theprogressive metamorphic zones in other regions where pumpellyitehas been found. Almost similar relations appear to hold in manymetamorphic terrains. Pumpellyites in glaucophanitic metamorphicterrains have, generally, low Fe'/R'R ratios. Physical andchemical conditions responsible for the formation of pumpellyiteare also discussed.     

Negative Ce Anomaly in the Indian Banded Iron Formations: Evidence for the Emergence of Oxygenated Deep-Sea at 2.9-2.7 Ga

Abstract: Major and rare earth element contents are reported for Late Archean banded iron formations (BIFs) in the Bababudan Group of the Dharwar Craton, South India. The BIFs are mostly composed of SiO₂ (average1ρ = 54.88.1 wt%) and Fe₂O₃* (44.38.2 wt%). The Al₂O₃ and TiO₂ contents are remarkably low, suggesting that detrital components were starved during the BIF deposition. The BIFs have a LREE-enriched pattern with a relatively high (La/Yb)_N (6.644.07). Total REE concentrations (RE) vary from 5.2 to 65.3 ppm. The REE patterns are characterized by the presence of a very large negative Ce anomaly (Ce/Ce*: 0.13-0.83) and a positive Eu anomaly (Eu/Eu*: 0.96-2.45). The Eu/Eu* decreases and (La/Yb)_N increases with a increase of RE. These correlations of REE indices are similar to those of modern hydrothermal iron-rich sediments near a mid-ocean ridge (MOR). Greenstones associated with the BIFs have MORB-like geochemical features. These geochemical and geological lines of evidence indicate that the depositional site of the BIFs was remote from a continent and/or island arc and that the BIFs were in situ hydrothermal sediments near a MOR. A striking negative Ce anomaly in the BIFs indicates that oxygenated deep-sea environments emerged at 2.9-2.7 Ga. The existence of contemporaneous Mn deposits in the Dharwar Craton supports this assertion. Our scenario of oxygen in the Earth's surface of the Late Archean is different from long-held notion that the atmosphere and ocean were persistently anoxic throughout the Archean.