Jellyfish patch formation investigated by aerial photography and drifter experiment

Jellyfish patch formation is investigated by conducting a drifter experiment combined with aerial photography of a sustained patch of the moon jellyfish in Hokezu Bay, Japan. Jellyfish patches are aggregations of individuals that are caused by a combination of swimming (active influence) and advection by currents (passive influence). The drifter experiment involved the injection of 49 drifters around a distinct surface patch of jellyfish within an area of approximately 300 m × 300 m. The drifters’ motion, caused only by the passive influence, was recorded in a series of 38 aerial photographs taken over approximately 1 h. The ambient uniform current field larger than the patch scale was estimated from the movement of the centroid position of drifters, while the distribution of horizontal divergence and relative vorticity around the patch was estimated from the time-derivative in areas of triangles formed by the drifters. The centroid positions of both drifters and patches moved stably toward the bay head at different speeds. The difference vector between the patch and drifter centroids was directed to the sun, and was opposite to the ambient current. The distributions of vorticity and divergence around patches exhibited inhomogeneity within the patch scale, and the drifters in this nonuniform current field aggregated near the convergence area within 1 h. The results suggest that horizontal patch formation is predominantly influenced by passive factors at the surface of Hokezu Bay. Furthermore, the upward swimming against downwelling may make sustained patch in surface layer.     

Alkaline leaching characteristics of biogenic opal in Eocene sediments from the central Arctic Ocean: a case study in the ACEX cores

Accurate knowledge of the extent of biogenic opal preservation in marine sediment cores is important for paleoceanographic reconstructions. The alkaline leaching method is widely employed for %biogenic opal analysis due to its ease and speed. In this study, a revised method for measuring %biogenic opal in sediment from arctic coring expedition samples was suggested. The studied middle Eocene sediments from the central Arctic Ocean presented a problem in insufficiently leaching biogenic opal with a Na₂CO₃ solution. Based on XRD analysis, it was suggested that such an alkaline resistance results from slight diagenesis of biogenic opal. In order to solve this problem, an alkaline leaching method utilizing a 2 M NaOH solution was suggested for the accurate measurement of %biogenic opal in the Eocene sediments from the central Arctic. Furthermore, dissolution rates from lithogenic matter by NaOH solution were measured in order to correct the %biogenic opal values.     

Habitability analyses of aquatic bacteria

Habitability is defined as an ability of an organism to inhabit different environments. Habitability of organisms, however, cannot be inferred from analyses such as a whole genome or community structures. A recently developed database, the MetaMetaDB, gives us information from what kind of environments one particular 16S rRNA sequence data has ever been obtained, and thus enables us to infer the habitability of the bacterium in question. In order to check the applicability of this database to study the habitability of aquatic bacteria, samples collected at two Naka River stations, one estuarine station from Naka River Estuary, two coastal stations at Oarai in Ibaraki Prefecture, Japan and one station in the Kuroshio Current of the western North Pacific were examined. The phylotypes were tracked against the MetaMetaDB and it was reasonably found that the low-salinity stations were dominated by sequences with “freshwater and groundwater”, “human” and “wastewater” habitat identities, while the high-salinity stations were dominated by those with a “marine” identity. The phylotypes of low-salinity stations with a particular habitat identity were absent or rare in the high-salinity stations and vice versa. The MetaMetaDB also showed that sequences of Cyanobacteria or related phylogenetic groups may be present in the human gut, as well as the probable distribution of the relatives (ancestors/descendants/siblings) of some bacteria. These overall findings proved that the MetaMetaDB is useful as a new tool to infer microbial habitability and it gives us new information on the possible origin and ecology of microorganisms in the environments.     

Lunar photometric properties at wavelengths 0.5-1.6 μm acquired by SELENE Spectral Profiler and their dependency on local albedo and latitudinal zones

The lunar photometric function, which describes the dependency of the observed radiance on the observation geometry, is used for photometric correction of lunar visible/near-infrared data. A precise photometric correction parameter set is crucial for many applications including mineral identification and reflectance map mosaics. We present, for the first time, spectrally continuous photometric correction parameters for both sides of the Moon for wavelengths in the range 0.5-1.6 μm and solar phase angles between 5° and 85°, derived from Kaguya (SELENE) Spectral Profiler (SP) data. Since the measured radiance also depends on the surface albedo, we developed a statistical method for selecting areas with relatively uniform albedos from a nearly 7000-orbit SP data set. Using the selected data set, we obtained empirical photometric correction parameter sets for three albedo groups (high, medium, and low). We did this because the photometric function depends on the albedo, especially at phase angles below about 20° for which the shadow hiding opposition effect is appreciable. We determined the parameters in 160 bands and discovered a small variation in the opposition effect due to the albedo variation of mafic mineral absorption. The consistency of the photometric correction was checked by comparing observations made at different times of the same area on the lunar surface. Variations in the spectra obtained were lower than 2%, except for the large phase angle data in mare. Lastly, we developed a correction method for low solar elevation data, which is required for high latitude regions. By investigating low solar elevation data, we introduced an additional correction method. We used the new photometric correction to generate a 1° mesh global lunar reflectance map cube in a wavelength range of 0.5-1.6 μm. Surprisingly, these maps reveal that high latitude (?75°) regions in both the north and south have much lower spectral continuum slopes (color ratio r_1547.7nm/r_752.8nm ? 1.8) than the low and medium latitude regions, which implies lower degrees of space weathering.     

NDVI prediction over Mongolian grassland using GSMaP precipitation data and JRA-25/JCDAS temperature data

An algorithm to predict the NDVI (Normalized Difference Vegetation Index) distribution over Mongolia, which is based on a stepwise multiple linear regression analysis, has been developed using global precipitation data obtained from satellites and global surface air temperature data obtained from the reanalysis data during the period 1998–2005. This algorithm can predict the NDVI value up to 1–3 months in advance for a grid with a spatial resolution of 0.25° × 0.25°.In order to validate the algorithm, the NDVI distribution was predicted for the period from May to November 2006 using 1 to 3-month prediction algorithms. The distributions of the predicted normalized anomalies agreed well with those of the observed normalized anomalies. It was found that these algorithms were effective for arid and semi-arid regions, despite its low accuracy for August and regions with high vegetation activity.     

Crustal structure in and around the region of the 1995 Kobe Earthquake deduced from a wide-angle and refraction seismic exploration

Abstract The 1995 Kobe (Hyogo-ken Nanbu) earthquake (M_JMA 7.2, M_w 6.9) occurred on Jan. 17, 1995, at a depth of 17 km, beneath the areas of southern part of Hyogo prefecture and Awaji Island. To investigate P-wave velocity distribution and seismological characteristics in the aftershock area of this great earthquake, a wide-angle and refraction seismic exploration was carried out by the Research Group for Explosion Seismology (RGES) . The profile including 6 shot points and 205 observations was 135 km in length, extending from Keihoku, Northern Kyoto prefecture, through Kobe, to Seidan on Awaji Island. The charge of each shot was 350–700 kg. The P-wave velocity structure model showed a complicated sedimentary layer which is shallower than 2.5 km, a 2.5 km-thick basement layer whose velocity is 5.5 km/s, overlying the crystalline upper crust, and the boundary between the upper and lower crust.
Almost all aftershock hypocenters were located in the upper crust. However, the structure model suggests that the hypocenters of the main shock and some aftershock clusters were situated deeper than the boundary between the upper and lower crust. We found that the P-velocity in the upper crust beneath the northern part of Awaji Island is 5.64 km/s which is 3% lower than that of the surrounding area. The low-velocity zone coincides with the region where the high stress moment release was observed.     

Electrochemical aspects of grinding media-mineral interactions in magnetite ore grinding

Electrochemical aspects of grinding media-mineral interactions in magnetite ore grinding are illustrated from the viewpoint of corrosive wear of grinding balls and changes in the surface properties of the ground minerals. The corrosive wear of mild steel and HCLA steel was found to be small in contact with magnetite, while the combined presence of pyrrhotite and oxygen accelerated the corrosion of the above ball materials. Austenitic stainless steel exhibited passive behavior under all the above conditions. Galvanic coupling of mild steel with magnetite or pyrrhotite resulted in the formation of a surface reaction product consisting of iron hydroxide species on the mineral.