Fracture energy release and size effect in borehole breakout

The paper presents a simple approximate analytical solution of the remote stresses that cause the collapse of a borehole or other circular cylindrical cavity in an infinite elastic space. Regions of parallel equidistant splitting cracks are assumed to form on the sides of the cavity. Their boundary is assumed to be an ellipse of a growing horizontal axis, the other axis remaining equal to the borehole diameter. The slabs of rock between the splitting cracks are assumed to buckle as slender columns, and their post-critical stress is considered as the residual stress in the cracked rock. The buckling of these slab columns is assumed to be resisted not only by their elastic bending stiffness but also shear stresses produced on rough crack faces by relative shear displacements. The energy release from the infinite medium caused by the growth of the elliptical cracking region is evaluated according to Eschelby's theorem. This release is set equal to the energy dissipated by the formation of all the splitting cracks, which is calculated under the assumption of constant fracture energy. This yields the collapse stress as a function of the elastic moduli, fracture energy, ratio of the remote principal stresses, crack shear resistance characteristic and borehole diameter. The collapse stress as a function of crack spacing is found to have a minimum, and the correct crack spacing is determined from this minimum. For small enough diameters, the crack spacing increases as the (4/5)-power of the borehole diameter, while for large enough diameters a constant spacing is approached. In contrast to plastic solutions, the breakout stress exhibits a size effect, such that for small enough diameters the breakout stress decreases as the (? 2/5)-power of the borehole diameter, while for large enough diameters a constant limiting value is approached. Finally, some numerical estimates are given and the validity of various simplifying assumptions made is discussed.     

Modelling the April 15 spectrum of Supernova 1993 J

We present the modeling of the ultraviolet and optical spectra obtained simultaneously on 1993 April 15 with the HST and at Lick Observatory. A Monte Carlo code is employed in the modeling and a comparison is made between models reported by different groups. With an atmosphere similar to the Sun in chemical composition, the observed spectral lines are well reproduced by a power law density structure of index around 20 except the strong H and HeI λ5876 lines which have peculiar absorption profiles. The photospheric velocity is found to be 9500 km/s and the blackbody temperature of the spectrum is 7990 K. For H and HeI λ5876, we suggest a two-component density structure which has a smoother layer located immediately outside the steeply decreasing inner envelope. The power law indices are most probably 20 and 3, respectively, with the transition point at about 13 000 km/s. In addition, this outer smooth layer serves to flatten the far UV spectrum as observed.     

Energetic solar electrons in the interplanetary medium

ISEE-3 measurements extending down to 2 keV energy have provided a new perspective on energetic solar electrons in the interplanetary medium. Impulsive solar electron events are observed, on average, several times a day near solar maximum, with 40% detected only below 15 keV. The electron energy spectra have a nearly power-law shape extending smoothly down to 2 keV, indicating that the origin of these events is high in the corona. These coronal flare-like events often produced ³He-rich particle events.In large solar flares which accelerate electrons and ions to relativistic energies, the electron spectrum appears to be modified by a second acceleration which results in a double power-law shape above 10 keV with a break near 100 keV and flattening from 10–100 keV. Large flares result in long-lived (many days) streams of outflowing electrons which dominate the interplanetary fluxes at low energies. Even in the absence of solar activity, significant fluxes of low energy electrons flow out from the Sun.Solar type-III radio bursts are produced by the escaping 2–10² keV electrons through a beam-plasma instability. The detailed ISEE-3 measurements show that electron plasma waves are generated by the bump-on-tail distribution created by the faster electrons running ahead of the slower ones. These plasma waves appear to be converted into radio emission by nonlinear wave-wave interactions.     

树木年轮重建阿勒泰西部1481-2004年6-9月降水量序列

根据采自阿勒泰西部地区5个采点的树木年轮样本, 建立了该地区的树轮年表. 通过相关普查发现, 其差值年表序列与该地区当年6-9月的降水量存在明显的负相关关系, 且具有明确的树木生理学意义. 用沙勒哈(t, t 1)两个树轮差值年表序列可较好地重建该地区1481-2004年524 a来的当年6-9月的降水量, 且经过交叉检验表明重建方程稳定可靠. 分析发现, 阿勒泰西部地区524 a来的重建降水量序列具有9个偏干阶段和9个偏湿阶段, 并且具有34.8 a、 5.0～5.1 a、 4.3～4.4 a、 3.9～4.0 a、 3.7 a和3.4 a的显著干湿变化准周期. 重建降水量序列在1518年、 1548年、 1634年、 1765年、 1856年前后发生过突变.     

小波分析在天然伽玛测井地质解释中的应用

在分析天然伽玛测井数据的信息特点和小波多分辨率分析原理的基础上,用小波多分辨率分析天然伽玛测井数据,消除其中的统计涨落等噪声干扰及提取天然伽玛放射性强度在不同沉积岩地层中分界标志特征和不同岩性中的变化特征,以提高应用天然伽玛测井资料进行地层划分及岩性识别的准确性和有效性.     

LZY1—1型光电浊度仪

本文介绍了LZY_(1-1)型光电浊度仪的设计原理,标定方法及使用结果,该仪器用经典法校准后,能快速测量大批量样品的悬浮物含量。     

Paraconchoecia diacanthus n. sp., a new species of planktonic Ostracoda

Ｐａｒａｃｏｎｃｈｏｅｃｉａｄｉａｃａｎｔｈｕｓｎ．ｓｐ．,ａｎｅｗｓｐｅｃｉｅｓｏｆｐｌａｎｋｔｏｎｉｃＯｓｔｒａｃｏｄａ￥ＣｈｅｎＲｕｉｘｉａｎｇａｎｄＬｉｎＪｉｎｇｈｏｎｇ（ＲｅｃｅｉｖｅｄＡｐｒｉｌ１６,１９９３１ａｃｃｅｐｔｅｄＪｕｌｙ２０...     

Interfacial geochemistry of barium in suspension and sediment from Zhujiang Estuary

Chemical forms of Ba are determined in samples of suspension and sediment from the Zhujiang Estuary. Their interfacial geochemical processes are discussed. Total suspended Ba content is between 2. 4 and 40. 4 μg/L, and mostly exists in the crystalline form (43. 5%), secondly in the Fe-Mn oxidative form (23.1%). Percentages of organic, carbonate and exchangeable forms are 14. 8%, 11. l%and 7.4%, respectively. Total content of Ba in the sediment is between 158. 6 and 48. 0 ug/g. Percentages of crystalline form, Fe-Mn oxidative form and carbonate form are 78. 4% ,13. 5%and 8. 2%, respectively. Organic and exchangeable forms are not detected. The study on the mechanism of interfacial movement suggests that the salinity range of 10 is the turning point for the varied distribution of Ba. The subsidence of crystalline form affects the decrease of Ba content in suspension. The decrease mostly takes place in the salinity range lower than 10, which corresponds to the high value of Ba content in the sediment. The     

On the recovery of surface wave by pressure transfer function

Except the commonly selected pressure transfer function derived from the linear wave theory, a previous study on the pressure transfer function for recovering surface wave from underwater pressure transducer suggested that the pressure transfer function is a function of frequency parameter only. With careful analysis, this study showed that the pressure transfer function should include a transducer submergence parameter as that given by the linear theory. It was found that the previously suggested empirical formula should be restricted to measurements with the pressure transducer close to the surface; otherwise overestimation of wave height would result. Field measurements were carried out with an acoustic wave gauge and a synchronized pressure transducer located at various depths with submergence parameter close to 1 (near the sea floor). It was shown that the previous one-parameter empirical formula might overestimate the significant wave height by more than 30%. This study found that with deep-water wave bursts excluded, the transfer function based on the linear wave theory provided a fairly good estimation on the significant wave heights, with an average deviation of 3.6%.     

Analysis of seabed instability using element free Galerkin method

Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth.