Compositional variation in Hg-bearing sphalerite from the polymetallic Eskay Creek deposit, British Columbia, Canada

The Eskay Creek, British Columbia, Canada, is a polymetallic, gold- and silver-rich, volcanic-hosted, massive sulfide deposit. The ore in the deposit is divided into subzones distinguished by mineralogy, texture, grade and metallurgical characteristics. This study presents the results of a mineralogical examination of three composite field samples, with emphasis on the chemistry of sphalerite. Sphalerite is associated with variable amounts of Hg-tetrahedrite and cinnabar, and an array of sulfides, sulphosalts and non-opaque minerals. Electron micro probe analyses of sphalerite in the three composite samples reveal wide variations in compositions. The Hg content in sphalerite in the three samples varies between 0.08 and 16.35 wt%, whereas the Fe content ranges from 0.33 to 2.29 wt%. The chemical formula of the sphalerite shows the compositional range (Zn_0.89–0.98Hg_0.01–0.09.Fe_0.005–0.02)S. Sphalerite exhibits an almost perfect substitution of Hg and Zn, as shown by the negative covariance between them. Sphalerite with the highest Hg contents tends to have the lowest Fe concentrations. The highest Hg contents in sphalerite are recorded in the samples with the highest bulk Hg concentrations and with the highest cinnabar contents.

The compositional variations of sphalerite are important because they can be used in mapping ore forming fluids and indicate possible temporal variations. Second, determination of the compositional variation of the sphalerite in the mine has metallurgical implications because the mineral is an important Zn source. The mineralogical data indicate that non-physical processes (e.g. pyrometallurgy) must be used to separate Hg from Zn concentrates, with direct environmental implications, that is, release of metals, such as Hg, into the environment during mining and processing.     

Impacts of Present and Future Climate Variability on Agriculture and Forestry in the Temperate Regions: Europe

Agriculture and forestry will be particularly sensitive to changes in mean climate and climate variability in the northern and southern regions of Europe. Agriculture may be positively affected by climate change in the northern areas through the introduction of new crop species and varieties, higher crop production and expansion of suitable areas for crop cultivation. The disadvantages may be determined by an increase in need for plant protection, risk of nutrient leaching and accelerated breakdown of soil organic matter. In the southern areas the benefits of the projected climate change will be limited, while the disadvantages will be predominant. The increased water use efficiency caused by increasing CO₂ will compensate for some of the negative effects of increasing water limitation and extreme weather events, but lower harvestable yields, higher yield variability and reduction in suitable areas of traditional crops are expected for these areas. Forestry in the Mediterranean region may be mainly affected by increases in drought and forest fires. In northern Europe, the increased precipitation is expected to be large enough to compensate for the increased evapotranspiration. On the other hand, however, increased precipitation, cloudiness and rain days and the reduced duration of snow cover and soil frost may negatively affect forest work and timber logging determining lower profitability of forest production and a decrease in recreational possibilities. Adaptation management strategies should be introduced, as effective tools, to reduce the negative impacts of climate change on agricultural and forestry sectors.     

A physicochemical model for the formation of gas hydrates of different structural types in K-2 mud volcano (Kukui Canyon,Lake Baikal)

Earlier, the coexistence of spatially separated layers of gas hydrates of cubic structures I and II (CS-I, CS-II) in the bottom sediment cores from K-2 mud volcano (Kukui Canyon, Lake Baikal) was described. The layers of gas hydrates of different structural types were situated at different depths and overlain by the lacustrine sediments. Hydrate of CS-II contained 13–15 mol.% ethane, whereas CS-I hydrate contained only 3–4 mol.% ethane. We present a physicochemical model explaining the formation of such an unusual natural object. The model suggests that only CS-I hydrate was originally present at the sampling site. Some geologic event (tectonic shifts, landslide, etc.) stopped natural-gas emanation from the mud volcano or increased the heat flow in the hydrate pool. As a result, CS-I hydrate began to dissolve in interstitial water. We assume that the ethane-enriched CS-II hydrate is an intermediate product of the dissociation (dissolution) of CS-I hydrate.     

Ziminaite,Fe3+VO4, a new howardevansite-group mineral from the Bezymyannyi volcano,Kamchatka, Russia

Mineralogy and Petrology - The new mineral ziminaite, ideally Fe3+VO4, was found in fumarole sublimates at the Bezymyannyi volcano, Kamchatka, Russia. Ziminaite occurs as lamellar, tabular or...     

Melt Pockets in Garnet Megacrysts from Cenozoic Alkali Basalts of the Shavaryn Tsaram Vicinity, Mongolia

Garnet megacryst with a multiphase inclusion from intraplate alkali basalts of the Shavaryn Tsaram(Tariat,Mongolia)was the object of the study.This unusual aggregate consists of porous glass,Ti-rich biotite,orthopyroxene,spinel,clinopyroxene,olivine,and ilmenite.Win TWQ 2.32 thermodynamic simulation of this system revealed a few intervals of equilibrium.Pressure and temperature adjustment reflected in the paragenetic minerals of the melt pocket.The capture of already crystallised garnet megacryst was at P=0.8-1 GPa and T=1120-1160℃.Mineral crystallisation inside the melt pocket,accompanied by external inputs,occurred at P=0.75-0.95 GPa;T=790-1120℃.Symplectite assemblage formed in the garnet megacryst due to decomposition at(P=0.55-0.7 GPa;T=850-930℃).The study of the oxygen isotope content in primary garnet and biotite of the melt pocket showed that the δ¹⁸O_VSMOW values are the same and correspond to that of typical mantle xenoliths.However,the chemical and microcomponent composition of the melt pocket minerals reveals a material that differs from basalts and peridotites.Thus,it has been revealed that the multiphase inclusion in the garnet megacryst formed not only on account of the garnet’s substance,but also due to the entrapped material of the Earth’s interior.     

Experimental study of brucite dissolution and precipitation in aqueous solutions: surface speciation and chemical affinity control

Dissolution and precipitation rates of brucite (Mg(OH)₂) were measured at 25°C in a mixed-flow reactor as a function of pH (2.5 to 12), ionic strength (10⁻⁴ to 3 M), saturation index (−12 < log Ω < 0.4) and aqueous magnesium concentrations (10⁻⁶ to 5·10⁻⁴ M). Brucite surface charge and isoelectric point (pH_IEP) were determined by surface titrations in a limited residence time reactor and electrophoretic measurements, respectively. The pH of zero charge and pH_IEP were close to 11. A two-pK, one site surface speciation model which assumes a constant capacitance of the electric double layer (5 F/m²) and lack of dependence on ionic strength predicts the dominance of >MgOH₂⁺ species at pH < 8 and their progressive replacement by >MgOH° and >MgO⁻ as pH increases to 10-12. Rates are proportional to the square of >MgOH₂⁺ surface concentration at pH from 2.5 to 12. In accord with surface speciation predictions, dissolution rates do not depend on ionic strength at pH 6.5 to 11. Brucite dissolution and precipitation rates at close to equilibrium conditions obeyed TST-derived rate laws. At constant saturation indices, brucite precipitation rates were proportional to the square of >MgOH₂⁺ concentration. The following rate equation, consistent with transition state theory, describes brucite dissolution and precipitation kinetics over a wide range of solution composition and chemical affinity:

     

Raman spectroscopic and calorimetric observations on natural gas hydrates with cubic structures I and II obtained from Lake Baikal

This study reports measurements of the Raman spectra of Lake Baikal gas hydrates and estimations of the hydration number of methane-rich samples. The hydration number of gas hydrates retrieved from the southern Baikal Basin (crystallographic structure I) was approx. 6.1. Consistent with previous results, the Raman spectra of gas hydrates retrieved from the Kukuy K-2 mud volcano in the central Baikal Basin indicated the existence of crystallographic structures I and II. Measurements of the dissociation heat of Lake Baikal gas hydrates by calorimetry (from the decomposition of gas hydrates to gas and water), employing the hydration number, revealed values of 53.7–55.5?kJ?mol^–1 for the southern basin samples (structure I), and of 54.3–55.5?kJ?mol^–1 for the structure I hydrates and 62.8–64.2?kJ?mol^–1 for the structure II hydrates from the Kukuy K-2 mud volcano.     

Numerical study on transient harbor oscillations induced by successive solitary waves

Tsunamis are traveling waves which are characterized by long wavelengths and large amplitudes close to the shore. Due to the transformation of tsunamis, undular bores have been frequently observed in the coastal zone and can be viewed as a sequence of solitary waves with different wave heights and different separation distances among them. In this article, transient harbor oscillations induced by incident successive solitary waves are first investigated. The transient oscillations are simulated by a fully nonlinear Boussinesq model, FUNWAVE-TVD. The incident successive solitary waves include double solitary waves and triple solitary waves. This paper mainly focuses on the effects of different waveform parameters of the incident successive solitary waves on the relative wave energy distribution inside the harbor. These wave parameters include the incident wave height, the relative separation distance between adjacent crests, and the number of elementary solitary waves in the incident wave train. The relative separation distance between adjacent crests is defined as the ratio of the distance between adjacent crests in the incident wave train to the effective wavelength of the single solitary wave. Maximum oscillations inside the harbor excited by various incident waves are also discussed. For comparison, the transient oscillation excited by the single solitary wave is also considered. The harbor used in this paper is assumed to be long and narrow and has constant depth; the free surface movement inside the harbor is essentially one-dimensional. This study reveals that, for the given harbor and for the variation ranges of all the waveform parameters of the incident successive solitary waves studied in this paper, the larger incident wave heights and the smaller number of elementary solitary waves in the incident tsunami lead to a more uniform relative wave energy distribution inside the harbor. For the successive solitary waves, the larger relative separation distance between adjacent crests can cause more obvious fluctuations of the relative wave energy distribution over different resonant modes. When the wave height of the elementary solitary wave in the successive solitary waves equals to that of the single solitary wave and the relative separation distance between adjacent crests is equal to or greater than 0.6, the maximum oscillation inside the harbor induced by the successive solitary waves is almost identical to that excited by the single solitary wave.     

Molecular and isotopic characteristics of gas hydrate-bound hydrocarbons in southern and central Lake Baikal

We investigated the molecular composition (methane, ethane, and propane) and stable isotope composition (methane and ethane) of hydrate-bound gas in sediments of Lake Baikal. Hydrate-bearing sediment cores were retrieved from eight gas seep sites, located in the southern and central Baikal basins. Empirical classification of the methane stable isotopes (δ¹³C and δD) for all the seep sites indicated the dominant microbial origin of methane via methyl-type fermentation; however, a mixture of thermogenic and microbial gases resulted in relatively high methane δ¹³C signatures at two sites where ethane δ¹³C indicated a typical thermogenic origin. At one of the sites in the southern Baikal basin, we found gas hydrates of enclathrated microbial ethane in which ¹³C and deuterium were both highly depleted (mean δ¹³C and δD of –61.6‰ V-PDB and –285.4‰ V-SMOW, respectively). To the best of our knowledge, this is the first report of C₂ δ¹³C–δD classification for hydrate-bound gas in either freshwater or marine environments.     

Geochemical and microbiological characteristics of sediments near the Malenky mud volcano (Lake Baikal, Russia), with evidence of Archaea intermediate between the marine anaerobic methanotrophs ANME-2 and ANME-3

Detailed lithological, biogeochemical and molecular biological analyses of core sediments collected in 2002–2006 from the vicinity of the Malenky mud volcano, Lake Baikal, reveal considerable spatial variations in pore water chemical composition, with total concentrations of dissolved salts varying from 0.1 to 1.8‰. Values of methane δ¹³С in the sediments suggest a biogenic origin (δ¹³С_min. ?61.3‰, δ¹³С_max. ?72.9‰). Rates of sulphate reduction varied from 0.001 to 0.7 nmol cm^?3 day^?1, of autotrophic methanogenesis from 0.01 to 2.98 nmol CH₄ cm^?3 day^?1, and of anaerobic oxidation of methane from 0 to 12.3 nmol cm^?3 day^?1. These results indicate that methanogenic processes dominate in gas hydrate-bearing sediments of Lake Baikal. Based on clone libraries of 16S rRNA genes amplified with Bacteria- and Archaea-specific primers, investigation of microbial diversity in gas hydrate-bearing sediments revealed bacterial 16S rRNA clones classified as Deltaproteobacteria, Gammaproteobacteria, Chloroflexi and OP11. Archaeal clone sequences are related to the Crenarchaeota and Euryarchaeota. Baikal sequences of Archaea form a distinct cluster occupying an intermediate position between the marine groups ANME-2 and ANME-3 of anaerobic methanotrophs.