Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

Decision-support systems for groundwater protection: innovative tools for resource management

Governmental authorities are forced by law to make decisions within the framework of European, national and regional directives in the fields of spatial planning, groundwater and environmental protection. These tasks can be supported by a decision-support system, which integrates data from various sources and helps to make decision processes more effective and transparent. Basic work for such a decision support system has been done in a transnational and interdisciplinary project (Interreg II C: KATER), including metadata definition, metadata system, cartographic tools and GIS tools. The direct integration of these tools and information in the decision process will be implemented in the next few years (project KATER II).     

High‐temperature gold‐copper extraction with chloride flux in lava tubes of Tolbachik volcano (Kamchatka)

Subvolcanic environments in supra‐subduction zones are renowned for hosting epithermal deposits that often contain electrum and native gold, including bonanza examples. This study examined mineral assemblages and processes occurring in shallow‐crust volcanic settings using recent eruption (2012–2013) of the basaltic Tolbachik volcano in the Kamchatka arc. The Tolbachik eruptive system is characterized by an extensive system of lava tubes. After cessation of magma input, the tubes maintained the flow of hot oxidized gases that episodically interacted with the lava surfaces and sulphate‐chloride precipitates from volcanic gases on these surfaces. The gas‐rock interaction had strong pyrometamorphic effects that resulted in the formation of molten salt, oxidized (tenorite, hematite, Cu‐rich magnesioferrite) and skarn‐like silicate mineral assemblages. By analogy with experimental studies, we propose that a combination of these processes was responsible for extraction of metals from the basaltic wall rocks and deposition of Cu‐, Fe‐ and Cu‐Fe‐oxides and native gold.     

Centaurus A: VLT Views of the Nearest Giant Elliptical Galaxy

VLT images in BVI are used to identify globular clusters in the central region of NGC5128. Based on the sizes, optical magnitudes and colors, a hundred candidate globular clusters are identified with projected galactocentric distances 1 kpc < R _G < 5 kpc. These clusters have magnitudes 18 < V < 20.5 or ?10.3 < M _V < ?7.8 at the distance of this galaxy, and colors 0.8 < V?I < 1.5 and 0.5 < B?V < 1.5. These identifications allow us to compare the properties of the X-ray globular cluster population discovered recently in this galaxy.     

Methane fluxes in the southeastern Baltic Sea

New data from surveys of gas-bearing mud areas in the Gdansk Deep (southeastern Baltic Sea) were collected during four research cruises in 2009–2011. These revealed the presence of seven large pockmarks apart from the three already known, and enabled significant improvement of the existing digital map of gassy mud distribution. Based on geochemical sediment analyses, calculated diffusive methane fluxes from the upper (0–5?cm) seabed layer into near-bottom waters were highest—3.3?mmol/(m²?day)—in pockmark mud, contrasting strongly with the minimum value of 0.004?mmol/(m²?day) observed in typical, background mud. However, fluxes of less than 0.1?mmol/(m²?day) were observed in all sediment types, including pockmarks. In a newer attempt to roughly estimate budgets at a more regional scale, diffusive methane venting amounts to 280?×?10⁶?mmol/day for southeastern Baltic Sea muddy sediments. Elongated pockforms in the southern Gotland Deep, known since the end of the 1980s as pockmarks, had methane concentrations that were similar to those of gassy mud from the Gdansk Basin, and there was no geo-acoustic evidence of considerably increased gas levels.     

New observations on high‐pressure phases in a shock melt vein in the Villalbeto de la Peña meteorite: Insights into the shock behavior of diopside

The petrology and mineralogy of shock melt veins in the L6 ordinary chondrite host of Villalbeto de la Peña, a highly shocked, L chondrite polymict breccia, have been investigated in detail using scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and electron probe microanalysis. Entrained olivine, enstatite, diopside, and plagioclase are transformed into ringwoodite, low‐Ca majorite, high‐Ca majorite, and an assemblage of jadeite‐lingunite, respectively, in several shock melt veins and pockets. We have focused on the shock behavior of diopside in a particularly large shock melt vein (10 mm long and up to 4 mm wide) in order to provide additional insights into its high‐pressure polymorphic phase transformation mechanisms. We report the first evidence of diopside undergoing shock‐induced melting, and the occurrence of natural Ca‐majorite formed by solid‐state transformation from diopside. Magnesiowüstite has also been found as veins injected into diopside in the form of nanocrystalline grains that crystallized from a melt and also occurs interstitially between majorite‐pyrope grains in the melt‐vein matrix. In addition, we have observed compositional zoning in majorite‐pyrope grains in the matrix of the shock‐melt vein, which has not been described previously in any shocked meteorite. Collectively, all these different lines of evidence are suggestive of a major shock event with high cooling rates. The minimum peak shock conditions are difficult to constrain, because of the uncertainties in applying experimentally determined high‐pressure phase equilibria to complex natural systems. However, our results suggest that conditions between 16 and 28 GPa and 2000–2200 °C were reached.     

Snow carrots after the Chelyabinsk event and model implications for highly porous solar system objects

After the catastrophic disruption of the Chelyabinsk meteoroid, small fragments formed funnels in the snow layer covering the ground. We constrain the pre‐impact characteristics of the fragments by simulating their atmospheric descent with the atmospheric entry model. Fragments resulting from catastrophic breakup may lose about 90% of their initial mass due to ablation and reach the snow vertically with a free‐fall velocity in the range of 30–90 m s^?1. The fall time of the fragments is much longer than their cooling time, and, as a consequence, fragments have the same temperature as the lower atmosphere, i.e., of about ?20 °C. Then, we use the shock physics code iSALE to model the penetration of fragments into fluffy snow, the formation of a funnel and a zone of denser snow lining its walls. We examine the influence of several material parameters of snow and present our best‐fit model by comparing funnel depth and funnel wall characteristics with observations. In addition, we suggest a viscous flow approximation to estimate funnel depth dependence on the meteorite mass. We discuss temperature gradient metamorphism as a possible mechanism which allows to fill the funnels with denser snow and to form the observed “snow carrots.” This natural experiment also helps us to calibrate the iSALE code for simulating impacts into highly porous matter in the solar system including tracks in the aerogel catchers of the Stardust mission and possible impact craters on the 67P/Churyumov‐Gerasimenko comet observed recently by the Rosetta mission.     

Observations of a Radio-Quiet Solar Preflare

The preflare phase of the flare SOL2011-08-09T03:52 is unique in its long duration, in that it was covered by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and the Nobeyama Radioheliograph, and because it showed three well-developed soft X-ray (SXR) peaks. No hard X-rays (HXR) are observed in the preflare phase. Here we report that no associated radio emission at 17 GHz was found either, despite the higher sensitivity of the radio instrument. The ratio between the SXR peaks and the upper limit of the radio peaks is higher by more than one order of magnitude than the ratio in regular flares. The result suggests that the ratio between acceleration and heating in the preflare phase was different than in regular flares. Acceleration to relativistic energies, if any, occurred with lower efficiency.