Application of the Single-Bubble Airgun Technique for OBS-Data Acquisition Across the Jan Mayen Ridge,North Atlantic

A 140 km long wide-angle seismic profile has been acquired by use of 6 Ocean Bottom Seismographs across the Jan Mayen Ridge, North Atlantic. The profile was acquired twice; once with a traditionally tuned standard source and secondly with a somewhat smaller source tuned on the first bubble pulse. Analysis of the frequency content of the data reveals that the single-bubble source within the 10-15 Hz frequency range generates a signal with a level about 5 db above that of the standard source. These differences can partly be related to differences in airgun depth. The higher output level for these frequencies enables the single-bubble source to resolve intra-crustal structures with a higher degree of certainty, when compared to the data acquired by use of the standard source array. The standard source seems to generate slightly more energy for frequencies around 6 Hz, probably due to the use of a large 1200 in/sup3 gun in this array. These low frequencies a re of importance for mapping of lower crustal and upper mantle structures, and it is recommended that this is taken into account when seismic sources for mapping of deep crustal and upper mantle structures are designed.     

The Japanese National Large Telescope (JNLT) project

The astronomical community in Japan is promoting a national project to construct a large optical infrared telescope on Mauna Kea in Hawaii. The scientific objectives and the basic concept of the project are briefly presented, as they stand in September 1984.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 September–6 October, 1984.     

Tidally generated island wakes and surface water cooling over Izu Ridge

The Kuroshio current is well known for generating cold wakes behind islands over Izu Ridge in Northwestern Pacific. Observational data from the geostationary Himawari-8 satellite for 2015–2017 revealed the occurrence of cold waters during the period when the Kuroshio current flows away from the islands. With a focus on tidal currents, this study presents an investigation of dynamical processes responsible for the formation of areas with low sea surface temperature (SST) through the adoption of a high-resolution numerical ocean model for an event that happened in July 2017. Areas with cold water emerged only when tidal currents are included in the numerical model. The model results indicate the cold surface waters are formed in the vicinity of the islands because of upwelling and vertical mixing. Qualitative features of the cold water formation for each island are found to depend on its size, topography, and ambient currents. Near Kozu Island, the tidal excursion is large enough to cause eddy shedding. These shed eddies are stirred by tidal currents to extend the surface cooling effect to wider areas. Near Hachijo Island, a persistent wake is formed by the ambient northward current. Inclusion of tidal currents destabilizes the wake, and consequently leads to the formation of a low SST area, although no clear eddy shedding is detected. The flow patterns around the islands are classified using an additional non-dimensional parameter, defined as the ratio between tidal excursion and island diameter.

     

Evolution of oceanic crust on the Kolbeinsey Ridge, north of Iceland, over the past 22 Myr

The evolution of oceanic crust on the Kolbeinsey Ridge, north of Iceland, is discussed on the basis of a crustal transect obtained by seismic experiment from the Kolbeinsey Ridge to the Jan Mayen Basin. The crustal model indicates a relatively uniform structure; no significant lateral velocity variations are observed, especially in the lower crust. The uniform velocity structure suggests that the postulated extinct axis does not exist over the oceanic crust formed at the Kolbeinsey Ridge, but supports a model of continuous spreading along the ridge after oceanic spreading started west of the Jan Mayen Basin. The oceanic crust formed at Kolbeinsey Ridge is 1–2.5 km thicker than normal oceanic crust due to hotter-than-normal mantle from the Iceland Mantle Plume. The observed generally uniform thickness throughout the transect might also indicate that the temperatures of the astheno-spheric mantle ascending along the Kolbeinsey Ridge have not changed significantly since the age of magnetic anomaly 6B.     

Characteristics of crustal structures in the Yamato Basin,sea of Japan,deduced from seismic explorations

Crustal structures around the Yamato Basin in the southeastern Sea of Japan, inferred from recent ocean bottom seismography (OBS) and active-source seismological studies, are reviewed to elucidate various stages of crustal modification involved from rifting in the crust of the surrounding continental arc to the production of oceanic crust in the Yamato Basin of the back-arc basin. The northern, central, and southern areas of the Yamato Basin have crustal thicknesses of approximately 12–16 km, and lowermost crusts with P-wave velocities greater than 7.2 km/s. Very few units have P-wave velocities in the range 5.4–6.0 km/s, which corresponds to the continental upper crust. These findings, combined with previous geochemical analysis of basalt samples, are interpreted to indicate that a thick oceanic crust has been formed in these areas of the basin, and that this oceanic crust has been underplated by mantle-derived magma. In the central Yamato Basin, the original continental crust has been fully breached and oceanic crust has been formed. Conversely, the presence of a unit corresponding to the continental upper crust and the absence of a high-velocity part in the lower crust implies that the southwestern edge of the Yamato Basin has a rifted crust without significant intrusion. The Oki Trough has a crust that is 17–19 km thick with a high-velocity lower crust and a unit corresponding to the continental upper crust. The formation of the Oki Trough resulted from rifting with magmatic intrusion and/or underplating. We interpret these variations in the crustal characteristics of the Yamato Basin area as reflecting various instances of crustal modification by thinning and magmatic intrusion due to back-arc extension, resulting in the production of a thick oceanic crust in the basin.     

Modelling shear waves in OBS data from the Vøring basin (Northern Norway) by 2-D ray-tracing

Three component recordings from an array of five ocean bottom seismographs in the northwestern part of the Vøring basin have been used to obtain a 2-D shear-wave (S-wave) velocity-depth model. The shear waves are identified by means of travel-time differences compared to the compressional (P) waves, and by analyzing their particle motions. The model has been obtained by kinematic (travel-time) ray-tracing modelling of the OBS horizontal components.The shear-wave modelling indicates that mode conversions occur at several high velocity interfaces (sills) in the 4–10 km depth range, previously defined by a compressional-wave velocity-depth model using the same data set.An averageV _p /V _s ratio of 2.1 is inferred for the layers above the uppermost sill, indicative of both poorly consolidated sediments and a low sand/shale ratio. A significant decrease in theV _p /V _s ratio (1.7) below the first sill may in part be atributed to well consolidated sediments, and to a change in lithology to more sandy sediments. This layer is interpreted to lie within the lower Cretaceous sequence. At 5–10 km depthV _p /V _s ratios of 1.85 indicate a lower sand/shale ratio consistent with the expected lithologies. The averageV _p /V _s ratio inferred for the crust is 1.75, which is consistent with values obtained north of Vøring, in the Lofoten area. An eastward thinning of the crystalline basement is supported by the shear-wave modelling.     

Comparison between a Regional and Semi-regional Crustal OBS Model in the Vøring Basin, Mid-Norway Margin

—Semi-regional Ocean Bottom Seismograph (OBS) data acquired in the central and northern part of the Vøring Basin, mid-Norway margin, have been modeled by use of 2-D ray-tracing. The semi-regional model, derived from the study of twenty-five OBSs deployed along a 120-km long profile, is compared with a regional model consisting of five OBSs from the same profile. The semi-regional model is somewhat more detailed than the regional model, due to the considerably closer receiver spacing. The overall geometry and velocity distribution of the two models are remarkably similar, however, proving that the regional procedure with large OBS spacing provides a reliable regional model.¶Intrusions of sills, related to early Tertiary continental rifting and break up, are important at intermediate and deep sedimentary levels (2–10 km below sea floor) in most parts of the area. The semi-regional modeling suggests that one of the deepest sills extends much further east and is substantially thicker (locally more than 500 m) than indicated in the regional model. Another important difference is a high-velocity body within the upper crystalline crust at 11–12 km depth in the NW part of the area, indicating that the closer OBS spacing in the semi-regional modeling allows detection of local intra-crustal intrusions. Local differences are also inferred in the lower crust; at about 20 km depth a structure is inferred within the lower crust from wide-angle reflections. This might suggest that the high-velocity lower crustal layer, interpreted as magmatic underplating, consists of a mixture of underplated/intruded magmatic material and blocks of continental lower crust.     

The effect of density stratification on the prediction of global storm surges

With the long-term goal of developing an operational forecast system for total water level, we conduct a hindcast study of global storm surges for Fall 2014 using a baroclinic ocean model based on the NEMO framework. The model has 19 vertical levels, a horizontal resolution of 1/12°, and is forced by hourly forecasts of atmospheric wind and air pressure. Our first objective is to evaluate the model’s ability to predict hourly sea levels recorded by a global array of 257 tide gauges. It is shown that the model can provide reasonable predictions of surges for the whole test period at tide gauges with relatively large tidal residuals (i.e., gauges where the standard deviation of observed sea level, after removal of the tide, exceeds 5 cm). Our second objective is to quantify the effect of density stratification on the prediction of global surges. It is found that the inclusion of density stratification increases the overall predictive skill at almost all tide gauges. The increase in skill for the instantaneous peak surge is smaller. The location for which the increase in overall skill is largest (east coast of South Africa) is discussed in detail and physical reasons for the improvement are given.